- Apr 9, 2011
- 39,233
- 76,813
Pre Rooted Stock ROM
Here is complete stock Pre rooted ROM
( MUST READ THIS before flashing DMF2/ME6 or any newer )
July13
N7100XXDMG1_N7100ODDDMG1_N7100DDDMG1- Deodexed - India - Download - Detail here
N7100XXDMG1_N7100ODDDMG1_N7100DDDMG1- Odexed - India - Download
June13
N7100XXDMF2_N7100OLBDMD2_XME - Malaysia - Download - - - Mirror
SuperSu updated to latest 1.34
Package have addition mod zip file which is optional, If you want to install that mod, instead using packed one use this
April 2013
N7100XXDMC3_N7100ODDDMD1_N7100DDDLK6 (INU) -India - Download
March 2013
N7100XXDMC3_N7100OXXDMC2_N7100XXDLK7 (XEO) - Poland - Download
Installation Instruction
- Download ROM and extract to ***.tar.md5 (unzip tool)
- Make sure you have installed Kies OR Samsung USB driver
- Open up the S/W Installation Program by executing the Odin3 v3.04.exe
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Check PDA, and point to ROM file you have extracted
File name shown in above image is for demo purpose, you have to select according ROM you have download
2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.
3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.
4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file has been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
After flashing your device will have SuperSU in application drawer. If you want to unroot it, open SuperSu - settings - Full unroot.
First thing I do recommend after rooting device is
EFS Backup
Why so?
EFS folder contains some important and some basic info related to our device identity like Wi-Fi address, Bluetooth MAC address and the very main IMEI address (nv_data.bin).
Now if this EFS partition accidently corrupted then your phone’s IMEI no. will erased and you can not make voice call further. This kind of damage is often not accepted by the service center of your respected handset’s company.
Here your backup can only be savior for you.
-This is pure samsung stock ROM as it is + Root
-Non wipe
-Won't raise flash counter.
- Non Hotfile link
Again to make it clear, there is no any additional changes except pushing superSU (busybox added to April 2013 and onward), so there won't be have any difference from stock ROM, but you will not need to Root / reset counter. Just note that, flashing prerooted ROM doesn't reset counter, If your flash counter already raised flashing this ROM doesn't reset it, but you can use triangle away to reset counter after flashing this ROM. later you can uninstall triangle away.
Rooting is not difficult but still many users scare from it, this will come handy to them.
There is no plan to make every release Pre rooted, when there will be major update and myself update device that time will make that ROM pre rooted.
There is already thread in dev section by as i9000, which also have deodexed version and many other ROMs with multi CSC and regularly updating too. This thread will update only ROMs which i am using, as well basic aim is to write tutorial abiut how to make pre rooted ROM.
There are two other MB6 and DMB2 India are ready but really finding difficulty to upload. still i will try my best to upload it.
- Password to unzip - when there is any password to unzip, file name itself will have it.
- difference in file size from sammobile stock rom size is just due to different compression method, once you extract it will be same.
How to make prerooted stock ROM.
Requirements :
Ubuntu and login as Root user.
Ext4_utils - extract to home directory
Root files (su and Superuser.apk) - copy to home directory
busybox - copy to home directory (optional)
Procedure :
1.Download ROM you need to preroot and rename stock.tar.md5 (just to make command line input easy)
2.Extract ROM
3.convert system.img to ext4 so we can mount it.
4.delete system.img
5.Create temp folder and mount it
6.Push root and busybox file to system and change permission
7.Conver newsys img to samsung system.img format
8.unmount and delete temp folder
9.create odin flashable tar file (here file names depends on files you have got by extracting ROM)
10. add md5 checksum
Now Flash prerooted.tar.md5 with odin.
Delete following files from home directory to make it clean
stock.tar.md5
newsys.img
and all files extracted while unpacking tar in step 1.
Credits :
Chainfire for his SuperSu
Phil3759
Credits to following user for referring their works on different forum
jazzor, rizdroid, das7982, faria
Here is complete stock Pre rooted ROM
( MUST READ THIS before flashing DMF2/ME6 or any newer )
July13
N7100XXDMG1_N7100ODDDMG1_N7100DDDMG1- Deodexed - India - Download - Detail here
N7100XXDMG1_N7100ODDDMG1_N7100DDDMG1- Odexed - India - Download
June13
N7100XXDMF2_N7100OLBDMD2_XME - Malaysia - Download - - - Mirror
SuperSu updated to latest 1.34
Package have addition mod zip file which is optional, If you want to install that mod, instead using packed one use this
April 2013
N7100XXDMC3_N7100ODDDMD1_N7100DDDLK6 (INU) -India - Download
March 2013
N7100XXDMC3_N7100OXXDMC2_N7100XXDLK7 (XEO) - Poland - Download
Installation Instruction
- Download ROM and extract to ***.tar.md5 (unzip tool)
- Make sure you have installed Kies OR Samsung USB driver
- Open up the S/W Installation Program by executing the Odin3 v3.04.exe
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Check PDA, and point to ROM file you have extracted
File name shown in above image is for demo purpose, you have to select according ROM you have download
2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.
3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.
4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file has been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
After flashing your device will have SuperSU in application drawer. If you want to unroot it, open SuperSu - settings - Full unroot.
First thing I do recommend after rooting device is
EFS Backup
Why so?
EFS folder contains some important and some basic info related to our device identity like Wi-Fi address, Bluetooth MAC address and the very main IMEI address (nv_data.bin).
Now if this EFS partition accidently corrupted then your phone’s IMEI no. will erased and you can not make voice call further. This kind of damage is often not accepted by the service center of your respected handset’s company.
Here your backup can only be savior for you.
-This is pure samsung stock ROM as it is + Root
-Non wipe
-Won't raise flash counter.
- Non Hotfile link
Again to make it clear, there is no any additional changes except pushing superSU (busybox added to April 2013 and onward), so there won't be have any difference from stock ROM, but you will not need to Root / reset counter. Just note that, flashing prerooted ROM doesn't reset counter, If your flash counter already raised flashing this ROM doesn't reset it, but you can use triangle away to reset counter after flashing this ROM. later you can uninstall triangle away.
Rooting is not difficult but still many users scare from it, this will come handy to them.
There is no plan to make every release Pre rooted, when there will be major update and myself update device that time will make that ROM pre rooted.
There is already thread in dev section by as i9000, which also have deodexed version and many other ROMs with multi CSC and regularly updating too. This thread will update only ROMs which i am using, as well basic aim is to write tutorial abiut how to make pre rooted ROM.
There are two other MB6 and DMB2 India are ready but really finding difficulty to upload. still i will try my best to upload it.
- Password to unzip - when there is any password to unzip, file name itself will have it.
- difference in file size from sammobile stock rom size is just due to different compression method, once you extract it will be same.
How to make prerooted stock ROM.
Requirements :
Ubuntu and login as Root user.
Ext4_utils - extract to home directory
Root files (su and Superuser.apk) - copy to home directory
busybox - copy to home directory (optional)
Procedure :
1.Download ROM you need to preroot and rename stock.tar.md5 (just to make command line input easy)
2.Extract ROM
Code:
tar xvf stock.tar.md5
3.convert system.img to ext4 so we can mount it.
Code:
./simg2img system.img newsys.img
4.delete system.img
Code:
rm -f system.img
5.Create temp folder and mount it
Code:
mkdir temp
mount -o loop newsys.img temp
6.Push root and busybox file to system and change permission
Code:
cp su temp/xbin/su
chmod 06755 temp/xbin/su
Code:
cp Superuser.apk temp/app/Superuser.apk
chmod 0644 temp/app/Superuser.apk
Code:
cp busybox temp/xbin/busybox
chmod 04755 temp/xbin/busybox
7.Conver newsys img to samsung system.img format
Code:
./mkuserimg.sh -s temp system.img ext4 tempdir 2048M
8.unmount and delete temp folder
Code:
umount temp
rmdir temp
9.create odin flashable tar file (here file names depends on files you have got by extracting ROM)
Code:
tar cvf prerooted.tar boot.img cache.img hidden.img modem.bin recovery.img sboot.bin system.img tz.img
10. add md5 checksum
Code:
md5sum -t prerooted.tar >> prerooted.tar
mv prerooted.tar prerooted.tar.md5
Now Flash prerooted.tar.md5 with odin.
Delete following files from home directory to make it clean
stock.tar.md5
newsys.img
and all files extracted while unpacking tar in step 1.
Credits :
Chainfire for his SuperSu
Phil3759
Credits to following user for referring their works on different forum
jazzor, rizdroid, das7982, faria
Last edited: