[ROM][UNOFFICIAL] CyanogenMod 10.1 Nightlies / Releases [SR3]

Search This thread

Mustaavalkosta

Senior Member
Dec 25, 2010
2,476
9,436
37
Tampere
opendesireproject.org
p.s. i have a question about this rom:
i observed that after booting and unlocking the phone it takes very long time until the phone finally gets usable. is it just me?

It's been like that with every JB ROM that I've run for longer periods of time. I don't have any information about what's causing it though.

and i also tested the kernel page merging feature but it seems to make the phone instable. i had it on for a while and had to pull out the battery 3 or 4 times because the phone more or less locked up a while after rebooting and unlocking it. not made enough tests to verify that it was this causing it but so it seems for now. any other experiences here?

Synergye is maintaining the KangBang kernel as I don't speak C, so I fear I must come empty-handed with this too. Personally, I've had that setting on and off in the past but I haven't seen any noticeable difference to either better or worse.

the tcp buffers size set by setprop for each connection type should be setable already in the build.prop file since ICS. though i never tested it. i used the "save" way via a scipt. maybe you want to check that out and incorporate it the more elegant way into buildprop if it works ;)

I was browsing through device repos that have official CM support and came across this in mako repo. I will probably try putting together something similar as well as possible build.prop additions. :)
 

qazsxdcfv

Senior Member
Sep 22, 2011
713
93
Behind the road
Mustaavalkosta sorry to be off topic but what GMT is Finland ? Just to make sure you build at the time .. Because on here is GMT +7 ..

Sent from my iPhone powered iOS 6.0.1 by Apple™
 

Raza Qadri

Senior Member
Jul 31, 2012
1,172
435
I dont know , but I'm falling in love with stock camera .. , the JB 4.1's ... There's an app named camera jb+ .. Used that ..

Sent from my iPhone powered iOS 6.0.1 by Apple™

i am waiting for it's developer to release jb4.2 camera +

---------- Post added at 12:35 PM ---------- Previous post was at 12:33 PM ----------

@Mustavalokosta can you tweak cm updater to use your server to download nightlies ?
 

pnoire

Senior Member
Oct 14, 2009
1,906
2,064
p.s. i have a question about this rom:
i observed that after booting and unlocking the phone it takes very long time until the phone finally gets usable. is it just me?
I experienced same issue sometimes.
But in my case, it occurs with all JB roms and only if i've set Nova as launcher.
 
  • Like
Reactions: a user

qazsxdcfv

Senior Member
Sep 22, 2011
713
93
Behind the road
W00t

uploadfromtaptalk1358151541491.jpg

And you know , the stock is good just tested macro effect

uploadfromtaptalk1358151621798.jpg

Sent from my hTC Desire HD powered CM10.1 by Mustaavalkosta™
 
  • Like
Reactions: robertus3d

adam5150

Senior Member
May 19, 2011
644
205
Was inspire fix needed. Flashed on initial setup and getting a popping twang sound in voice calls
 
Last edited:

qazsxdcfv

Senior Member
Sep 22, 2011
713
93
Behind the road
I dont know why but after i charge , 50 % i discharge it and im playing the dhd .. After that i got lots of freeze .. I think i have booted up 10 times .. With removing battery .. Im using 20131401 build and using a user fix , .. With my custom kernel ..
Idk whats the problem ..

Sent from my hTC Desire HD powered CM10.1 by Mustaavalkosta™
 

nicopilami

Senior Member
Sep 14, 2010
538
20
Chronus

Hi

1°) it seems my Chronus lockscreen widget does not want to display any calendar event, even with the checkbox checked and calendars selected.
Do you have this issue too ?

2°) is it possible to display missed calls / sms / ... notifications on this lockscreen widget too ?

Thanks
Nico
 
Last edited:

qazsxdcfv

Senior Member
Sep 22, 2011
713
93
Behind the road
Hi

1°) it seems my chromium lockscreen widget does not want to display any calendar event, even with the checkbox checked and calendars selected.
Do you have this issue too ?

2°) is it possible to display missed calls / sms / ... bnotifications on this lockscreen widget too ?

Thanks
Nico


I'm not getting the first problem nor the second .. And the name its not chromium .. But Chronus .. :D

Sent from my iPhone powered iOS 6.0.1 by Apple™
 
  • Like
Reactions: nicopilami

yvibes

Senior Member
Mar 28, 2011
866
232
London
I have got 4 random reboots since yesterday when I first installed this ROM! I haven't had any of those in a long time :/ I don't know what's causing them...I have full wiped and installed several times...at the moment I have no external apps downloaded and I still just got a random reboot, anyone else getting this? Also the phone freezes if I take a photo with flash when my battery is kind of low

Sent from my Desire HD using xda premium
 

Mustaavalkosta

Senior Member
Dec 25, 2010
2,476
9,436
37
Tampere
opendesireproject.org
Hi Mustaavalkosta,
can I use "cyandelta" with this ROM? Or any other updater package?

Thanks
Alex

CyanDelta's Play Store description said:
Supports all official CyanogenMod ROMs and devices listed in http://get.cm

So, I'd say no, but I've no personal experience with CyanDelta nor any other OTA updater except CM Updater (with my tilapia) which has the same limitation as CyanDelta seems to have.
 

alexjava

Member
Feb 12, 2007
40
3
Roma
So, I'd say no, but I've no personal experience with CyanDelta nor any other OTA updater except CM Updater (with my tilapia) which has the same limitation as CyanDelta seems to have.

Thanks. This means that for each release I'd have to download the full package and install it? May I install a new release without wipe the data?

Thanks
Alex
 

Mustaavalkosta

Senior Member
Dec 25, 2010
2,476
9,436
37
Tampere
opendesireproject.org
Thanks. This means that for each release I'd have to download the full package and install it? May I install a new release without wipe the data?

Thanks
Alex

Yes, you'll need the full zip. Wiping dalvik & cache should be enough for upgrade flashes but keep in mind that dirty flash is a dirty flash when reporting bugs to fellow users (ie. confirm the bug exists with a clean flash before wasting everyone's time).
 

adam5150

Senior Member
May 19, 2011
644
205
Yes, you'll need the full zip. Wiping dalvik & cache should be enough for upgrade flashes but keep in mind that dirty flash is a dirty flash when reporting bugs to fellow users (ie. confirm the bug exists with a clean flash before wasting everyone's time).

Will inspiremod be needed for your ROMs. I installed inspire plus fps zip and having a distorted sound in voice calls

Sent from my Desire HD using Tapatalk 2
 

Mustaavalkosta

Senior Member
Dec 25, 2010
2,476
9,436
37
Tampere
opendesireproject.org
Will inspiremod be needed for your ROMs. I installed inspire plus fps zip and having a distorted sound in voice calls

Sent from my Desire HD using Tapatalk 2

I can't say, try disabling Noise suppression in Phone app > menu > Settings > Noise suppression. If that doesn't have any effect, hopefully someone with Inspire can help you with the sound.
 

Mustaavalkosta

Senior Member
Dec 25, 2010
2,476
9,436
37
Tampere
opendesireproject.org
a user's network tweaks are now baked in to the ROM, so no need for that userinit.sh anymore. [github commit]

I also increased /sys/block/mmcblk0/bdi/read_ahead_kb from 1024 to 2048 as previously suggested by michelD. [github commit]

The other 2 suggested values will be kept as they are for now as wifi.supplicant_scan_interval is pretty close to CM default that I checked from official device repos and I'm not convinced that build.prop setting ro.ril.disable.power.collapse actually exists in Android's codebase anymore thus the only logical thing to do would be to remove the build.prop value altogether (source). Users can still change those values themselves with various tools (ie. CM FileManager) if they want to do so. :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 249
    These are UNOFFICIAL CM10.1 JellyBean Nightlies / Releases brought to you by Mustaavalkosta and TeamCodefire as a continuum to CM10 nightlies.

    GijgSN5.png
    A1gKSTb.png
    dz0CEmg.png
    TVboRJ4.png

    #include
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    General:
    Builds are generated automatically each day week (except "releases" which will be done once a month and after SR1 when required) with latest changes from CM, Andromadus and myself. Builds use some required Andromadus' repos for msm7x30 that can be found from github (link below) and local device repo for ace. Kernel is based on synergye's KangBang kernel with some changes to fulfill some dependencies on this rom. Local manifest used for the builds can be found here. If the builds stop coming at some point, it most likely means there are changes in upstream that broke the build. I'll attend to solving such situations when I have time. Latest 7 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.

    Thanks and credits:
    • Andromadus (for msm7x30 repos)
    • CodeAuroraForum
    • CyanogenMod
    • BananaGranola
    • Epic Beard Men
    • eXistZ
    • Flemmard
    • Flinny
    • Juansheng
    • KangBangKreations (shipped kernel is based on this)
    • paulb_nl
    • thachtunganh (s2w)
    • PipelinerArd (for initial spark for this project)
    • synergye
    • TeamCodefire (for build server and hosting, priceless)
    • a user (for provided tweaks)
    • Flow-Wolf (for the video review, see Q&A)
    • All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.

    Githubs:

    Changelogs:


    Fresh installation instructions:
    20130313 and newer nightlies are not compatible with KangBang 3.x or older!
    1. Download Nightlies / Releases [BasketBuild mirror]
    2. Download gapps (goo.im/gapps)
    3. Put the files on SD card.
    4. Reboot to recovery.
    5. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
    6. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-ace.zip
    7. Flash gapps-jb-xxxxxxxx-signed.zip
    8. Reboot and enjoy.

    Update installation instructions:
    20130313 and newer nightlies are not compatible with KangBang 3.x or older!
    1. Download Nightlies / Releases [BasketBuild mirror]
    2. Put the file on SD card.
    3. Reboot to recovery.
    4. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-ace.zip
    5. Remember to reflash boot.img via fastboot if you are HTCDev unlocked.
    6. No need to flash gapps as CM backuptool script should take care of them.
    7. Reboot and enjoy.

    InspireMod

    Contact:

    Donations:
    (codefi.re donations are used to cover the server costs, my donations will be used to increase my beard growth in a way or another)


    Q&A:
    Q: What's "M-Series"?
    A:
    CyanogenMod said:
    We aren’t exactly sure what M stands for. “Monthly”, “milestone”, or perhaps “MINE ALL MINE!”. Whatever it is, I hope that we are meeting the needs of community.

    Q: Where are my developer and performance options?
    A: http://goo.gl/jpS8r

    Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
    A: HTC Dev unlock is pretty much useless when flashing roms from recovery. Until HTC One, it doesn't allow flashing boot partition from recovery which pretty much kills or cripples any custom rom if boot.img has been modified. You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:

    Code:
    fastboot flash boot boot.img

    You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.

    Q: What does the ROM look like?
    A: Video review by Flow-Wolf.

    Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
    A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]

    Q: I hate you for not fixing this issue X!!!
    A: I love you too.

    Q: How I can build CM10.1 myself?
    A: Setup a basic Android build environment.
    Code:
    mkdir cm10
    cd cm10/
    repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
    mkdir -p .repo/local_manifests
    wget https://github.com/Mustaavalkosta/android/raw/cm-10.1/local_manifest.xml -O .repo/local_manifests/cm_ace.xml
    repo sync
    cd vendor/cm/
    ./get-prebuilts
    cd ../../
    . build/envsetup.sh
    lunch cm_ace-userdebug
    mka bacon
    Once the build finishes you'll find your goods from out/target/product/ace/ directory.

    Q: My device rebooted itself all the way to the white HTC bootsplash. What should I do?
    A:
    Regarding the reboots, it would be incredibly helpful if someone could get a last_kmsg after an unexpected reboot. To do so, go directly to recovery after the reboot (without booting into android) via the volume key and power button, then run adb pull /proc/last_kmsg on your computer and upload. I thought the issue was stemming from out of pmem errors like on vision which is why I increased pmem allocation again. Without any evidence, it's just guesswork though.
    Flashable zip to copy /proc/last_ksmg to your sdcard, no adb needed: http://downloads.codefi.re/mustaavalkosta/last_kmsg.zip

    Q: Something about something something something.
    A: Ask the guy/gal next to you.

    XDA:DevDB Information
    [UNOFFICIAL] CyanogenMod 10.1 Nightlies / Releases [SR3], ROM for the HTC Desire HD

    Contributors
    Mustaavalkosta
    ROM OS Version: 4.2.x Jelly Bean
    ROM Kernel: Linux 3.0.x
    Based On: CyanogenMod

    Version Information
    Status: Stable
    Current Stable Version: SR3
    Stable Release Date: 2013-11-25

    Created 2014-10-09
    Last Updated 2014-10-09
    55
    SR1

    This will be the last milestone release until CM puts out another stable release or I get big enough breakthrough somewhere that it will require building a new ROM. This is just a heads up not to wait milestone builds to continue monthly. There's not much point to release almost identical ROMs just that people can feel they have the latest stuff in their phones. For that purpose there are nightlies. :)

    I also cleaned up directory structure a bit on codefi.re and thus also on goo.im. Nightlies can be found under "nightlies" directory from now on and these milestone builds are under "releases". I hope this change makes it a bit easier to follow the logic behind the builds.

    Thanks for all the contributions since RC5!

    Download: [codefi.re][goo.im]
    Buttonlight patch: [codefi.re][goo.im]
    Perf kernel: [codefi.re][goo.im]
    Changelog: [pastebin]
    Manifest: [github]

    ps. I recently got asked for an Android related job and I'll start soon so my time with this will be a bit more limited than it has been this far but I don't see this as a huge problem as the most time-consuming and urgent stage for this rom is already far behind.
    44
    I changed crontab for nightlies to only produce a nightly build once a week on Mondays. There are not that many changes anymore that they would require daily builds. This frees build server resources for other users.

    I may still do SR1.2 at some point. My personal feel of the dalvik.vm.heapgrowthlimit change is that the lower value works better and I probably want to put that change out to SR releases too. It has been live on nightlies for some time.

    I'm now living at the new place and my move went smoothly. It's still a bit chaotic but I hope to get back to working on ace soon. Thanks for all the help and support on this thread for the past ~7.5 months. Many problems wouldn't have been solved without wide user feedback and testing. :)
    41
    SR2

    So, here it is. It took a bit longer than an hour overall due various things but oh well, sleep is for the weak. :p

    Download: [codefi.re][goo.im]
    Buttonlight patch: [codefi.re][goo.im]
    Perf kernel: [codefi.re][goo.im]
    Changelog: [pastebin][codefi.re] (It doesn't include totally new repos, it was too messy with those.)
    Manifest: [github]

    ps. New gapps: http://goo.im/gapps/gapps-jb-20130812-signed.zip
    38
    RC1

    You can now download RC1 build from: http://downloads.codefi.re/mustaavalkosta/cm-10-1-unofficial-ace/release-candidates

    BIG FAT DISCLAIMER:
    THIS IS NOT COMPARABLE TO OFFICIAL CYANOGENMOD RELEASE CANDIDATES. IT'S AS UNSTABLE OR STABLE AS THE LATEST NIGHTLIES HAVE BEEN AND EPIC BEARD MEN WILL SHAVE YOU WITH AN AXE IF YOU COMPLAIN ABOUT IT NOT BEING STABLE ENOUGH TO CALL IT RELEASE CANDIDATE. YOU HAVE BEEN WARNED.


    Sorry for the caps but I already saw my share of useless crying about semantics on cfx thread and SR naming scheme.

    Download and enjoy!