The best bet would be to go to my other thread where I have the 4.3 cwm and twrp backups and just grab one of them and restore. You shouldn't have to wipe data.
[RUU] Google Edition Conversion. 5.0.1 RUU Zip pre-rooted/non-rooted + firmware
- Thread starter graffixnyc
- Start date
The best bet would be to go to my other thread where I have the 4.3 cwm and twrp backups and just grab one of them and restore. You shouldn't have to wipe data.
Any looking to make browser apk work on 4.3
http://xdaforums.com/showthread.php?t=2385933
AT&T HTC ONE GE 4.3
http://xdaforums.com/showthread.php?t=2385933
AT&T HTC ONE GE 4.3
I followed this proces :
1) set CID to superCID
2) install the 1.44 Hboot in RUU mode (thanks SneakyGhost) http://d-h.st/qfc
- fastboot oem rebootruu
- fastboot oem rebootRUU
- fastboot flash hboot orig_hboot_1.44.0000_M7_RUUmode.zip
Correct ?
nope... everything is correct up until your last step. it's fastboot flash zip orig_hboot_1.44.0000_M7_RUUmode.zip not fastboot flash hboot
I don't think having root affects OTA.
Last week I flashed the 4.2.2 RUU. Yesterday I got the 4.3 OTA. I was rooted. After installing the OTA I still had root. I was using the latest supersu so maybe that's why. I also had a modified hosts file and that didn't affect the OTA at all.
yeah, The issue was only with the stock non-rooted one but that's fixed now
thank you VERY much sir... you're the man
---------- Post added at 08:28 PM ---------- Previous post was at 08:27 PM ----------
yeah, The issue was only with the stock non-rooted one but that's fixed now
what custom recovery is included into the pre-rooted ruu sir?
Install the clockwork mod app from Play Store.
It will then flash clockwork recovery direct on your phone without the need for laptop.
You can then either flash radio in recovery or through adb.
Hi - do I need to be running the stock rom in order to get OTA in the future? I used your helpful guide to get the MID and CID changed and the google bootloader. Still running the TWRP recovery and right now the insert coin GE rom - though I may change back to ARHD when Mike uploads it. Also want a custom kernel again for the logo menu when they're available.
Thanks.
Thanks.
Of course.If it didn't work people would be jumping all over us screaming "It didn't work!!!"
haha. i understand, i ask because it wont install. i flashed the ruu, im bone stock. keeps failing in recovery.
I'm didn't include one
it's only rooted. Everything else is stock. Busybox isn't even installed. I wanted to keep it as stock as possible but with no hassle root if you want it. Sent from my HTC One using Tapatalk 4
Tried flashing 4.2.2 first, no OTA, but that might be because I am in Denmark where no GE is sold? Installed 4.3, do I need to relock bootloader and shizzle for it to OTA in the future?
Yes, it worked for me as well. That's how I was able to release the 4.3 RUU and the nandroids
I'm in NYC
I was running sense so I re did the 4.2.2 conversion (I didn't have to change my mid) with the Google Edition Cid.
I had nothing installed, I didn't set the phone up or anything (just pressed next through everything and skipped) cleared data on Google services framework a few times and rebooted. After doing that a bunch of times without getting the update, it eventually picked it up after one of the times I did it.
Sent from my HTC One using Tapatalk 4
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
405Go thank @homeslice976 For helping me do the system pull for the 5.0.1 RUU. Since I don't have the device anymore it was a great help!
This will NOT work on a CDMA HTC One GSM ONLY!
This thread is NOT to support changing your MID, Changing your CID, Rooting or Flashing a custom recovery. If you need to learn how to do any of those do NOT use this thread to post in. Post in the respective dedicated threads to complete these processes. This thread is ONLY to support flashing the RUU. Nothing more, nothing less.
This is NOT a general 5.0.1 discussion thread.
Furthermore, if you need any more detailed instructions than what's stated in this post then you really shouldn't be doing this to your device. If you need a "video" or ask for "step by step" instructions you will NOT get anything more than what's in this post (at least from me). There is no easier way to do this process, there is no easier way to explain it. If you read the post and still don't understand what to do then I advise you to leave your phone alone... Read and then read some more until you understand everything.. WE WILL NOT SPOON FEED YOU IN THIS THREAD!
This procedure is not easy and is not really noob friendly, well flashing the RUU is not really difficult but it's the prerequisites that are more complex/risky. If the instructions aren't clear enough for you or you require further hand holding then I'm sure most of us would advise you stay away from the process.
Also, please do not PM me for support. PM's will not be answered. Post it in the thread. It helps other's having the same issue find a solution. If it's over PM it only benefits you and not everyone else
Prerequisites
S-Off,
ADB knowledge
Fastboot knowledge
Instructions:
First you are going to have to have s-off on your device. Thread for S-off (and support for S-off) http://xdaforums.com/showthread.php?t=2314582
Full Conversion 5.0.1 RUU ZIP containing System, Boot and all Firmware 5.11.1700.3 Available as pre-rooted and stock non-rooted
This will wipe EVERYTHING INCLUDING YOUR SD CARD so make sure you back up the contents before running this, but you'll end up with a factory-fresh GE. Of course, there's still no support, warranty or responsibility implied or otherwise.
The 5.0.1 RUU Zip supports the following MIDs and CIDs if your MID or CID is not in this list you will have to modify the android-info.txt file in the zip to match your MID/CID
modelid: PN0710000
modelid: PN0711000
modelid: PN0712000
modelid: PN0713000
modelid: PN0714000
modelid: PN071****
cidnum: 11111111
cidnum: T-MOB010
cidnum: CWS__001
cidnum: BS_US001
cidnum: GOOGL001
Code:adb reboot bootloader
Code:fastboot oem rebootRUU
Code:fastboot flash zip RUU-HTC_One_GE-5.0.1-5.11.1700.3.zip
you will the following message:
Code:FAILED (remote: 90 hboot pre-update! please flush image again immediately)
Just run the same command again:
Code:fastboot flash zip RUU-HTC_One_GE-5.0.1-5.11.1700.3.zip
Code:fastboot reboot
Download Links Can be Found on my Website: http://www.graffixnyc.com/m7.php
DO NOT MIRROR
You can also find the 5.0.1 OTA zip, firmware.zip, stock recovery and bootloader on my site as well from the same link above
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, or flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. This process is not for the faint of heart so I am not responsible.... It was the other guy... I swear....81Graffixnyc had to run off to class, but he and I both wanted to make sure Argenist and the other guys in IRC got thanked properly.
Argenist, man this wouldn't have happened without your help. You're a hero around here to lots of people.
Thanks for trusting us not to brick your brand new phone.
To Daereys, and Originator, and everyone else involved in getting the partitions dumped
Thank you very much!
I haven't had that much fun in IRC in forever.
VERY important don't do the procedure in the OP unless you have backed up your STOCK BOOTLOADER
Here are instructions for reversing all of this
Prerequsites:
S-off
1.44 HBoot
RUU for your device
Ok I thought reversing since I had S-off would be a simple affair and maybe I took a misstep along the way but I got it done.
Here's what worked FOR ME.
1) set CID to superCID
2) install the 1.44 Hboot in RUU mode (thanks SneakyGhost) http://d-h.st/qfc
3) install the RUU for your phone/carrier
4) if RUU is unavailable for your carrier, install the 1.44 hboot, one of the stock 1.29 roms, and change CID back to your device's CID
If you changed your MID you'll need to change that back as well.
5) change CID back to your device.
This will take you back to a factory fresh install with 1.44 bootloader
RevOne still works and I retained S-off.
If someone else has an easier way that works, please let me know.
Please NOTE:
Restoring the RUU took a long time and looked like it hung up a couple of times when I ran it. Just let it run.
The following thread from Sneakyghost has everything you ever wanted to know about Hboots and then some. Please read it.
http://xdaforums.com/showthread.php?t=231672619Seriously can't you guys just wait? When I get home I will get everything sorted for a complete conversion. Give an inch and everyone wants a yard. Smh..maybe its because I'm drunk at the bar with my classmates and professor.16Here is the full RUU (including SBL images). This will wipe everything, but you'll end up with a factory-fresh GE. Of course, there's still no support, warranty or responsibility implied or otherwise.
http://d-h.st/AnA
MD5 (RUU-HTC_One_GE-2.14.1700.15.zip) = 01e98e27bca4ffb4bbbbeaea6d2ddecc
This RUU contains all GE images (adsp, boot, hboot, sbl1, sbl2, sbl3, radio, recovery, rpm, sp1, system, tp, tz) from a GE dump.
You must be S-OFF, either SuperCID or GOOGL001 and know what you are doing. (Don't blindly run these commands.)
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip RUU-HTC_One_GE-2.14.1700.15.zip
fastboot flash zip RUU-HTC_One_GE-2.14.1700.15.zip
fastboot reboot13
I'd typically ignore a question like this as this should be easy enough to google, but I can relate to your plight with this one. SBL is the "Secondary Boot Loader" which is a part of the bootloader chain. The different numbers are the different stages and are run/called in order.
New posts
-
Note 9 (soft/hard?) bricked, help needed- Latest: quadcore_yt
