same MD5. stuck at the same place again.
the sensors are working slow, is there a possibility to fix this in the future.
autorotiation is working slow because of this and games are not playable with this.
I re-built the file and re-uploaded in the first post.
MD5 checksum: 9833a9ccce94e600b1be34ec38e503cb
possible to come up with flashable cwm zips?
---------- Post added at 10:08 PM ---------- Previous post was at 09:45 PM ----------
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x028040c640ffa0d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: MSC
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: USP
creating partition: UDA
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 4 EBT please wait.. done!
Formatting partition 5 MSC please wait.. done!
Formatting partition 6 SOS please wait.. done!
Formatting partition 7 LNX please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 9 CAC please wait.. done!
Formatting partition 10 USP please wait.. done!
Formatting partition 11 UDA please wait.. done!
done!
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
sending file: recovery.img
/ 5242880/5242880 bytes sent
recovery.img sent successfully
sending file: boot.img
/ 7602176/7602176 bytes sent
boot.img sent successfully
sending file: system.img
| 41877504/161929152 bytes sent
and stucked again.
It's definitely up to your device. I tested it several times works perfectly. I will provide zip during the day, but remember the system partition must be at least 155MB, otherwise you will soft brick brick your tablet.
I'll try to compile the email widget to open gmail, if I do that, I will send it to you.Love the rom! bit laggy to start but im letting it get settled and ill see how it runs.
Is there anyway you could make your email widget count from the Gmail app or email?
I already solved the issue with speed and RAM memory. Thinking to provide small update or new release.@OP
First off thanks for ur efforts but I'm going back to VegaComb, cause this Rom is alot slower. Plus too many apps keep closing, whilst I didn't have these problems with VegaCOMB.
Thanks again.
i tried a few more times today but still failed. i'm really hoping that i can use your rom. is it possible that u make a CWM flashable zip for the rom? my system partition is 155MB, really dont know what went wrong.
vtec_screamer said:hi everybody,
can anyone confirm if 3G is working in this ROM?
If not, anyone knows how can I make it to work with ViewComb?
I'm still waiting for my ViewPad but I'm eager to install ViewComb as soon as I get it...
Thanks
Try this app, works for me: ViewCOMB ScreenThank you for the ROM and for your effort!
Although on my POV Mobii I have flustrating touch screen issues even after several screen calibrations as unwanted double touch (duplicate char entry on keyboard on each 4-6 charaters - very annoying), inaccurte positioning.
Any idea how to fix this?
Don't count on it...
It says ....COMB....
Probably just VegaComb with a 'borrowed' ICS theme...
hi
What is the difference between these two : vegacomb 3.2 and viewcomb 3.2 ?