*[SuperSonic]*[April-05]*[CM9-ICS KERNEL][RC1-R] Horse Power 2x ICS RC1-R [OTF]

Search This thread

k101d

Senior Member
Aug 23, 2007
867
262
Hatyai
Before flash this kernel I stay on owain kang#29+ 3.0.8-open2x with BB/RIL 0313 phone signal normal.

  1. Flash this kernel boot -> no phone signal then copy original lge-ril.so (V10b,Europe) ->phone signal back again.
  2. Use getril ->it said BB/RIL no match try to select macth -> Phone signal still OK
  3. Boot -> no phone signal -> getril ->UNKNOWN BASEBAND -> select ril to V10b,Europe -> no signal ->boot
  4. Phone signal OK baseband back to 0313 ril V10b,Europe

SO let use no match BB/RIL or what to do next :confused:
:eek:run USSD (*121*1*9#) phone signal lost again need.
 
Last edited:

spica1234

Retired Recognized Developer
Aug 1, 2010
3,081
3,362
India
You will find an app to control otf HP 2x kernel tweaked. More details abt off could be obtained through HP extended thread project under my signature.

Sent from my LG-P990 using xda premium
 
  • Like
Reactions: temasek

remczar69

Senior Member
Dec 7, 2010
287
46
Good to see you working on CM9 spica. I have been using your kernels since the first HP for GB.
I have flashed this one and seems to be fine so far!
I'm waiting for the RC version and a possibility to OC.

Thank you!
 

Thief777

Senior Member
Sep 26, 2010
298
29
Mogilev
Good to see you working on CM9 spica. I have been using your kernels since the first HP for GB.
I have flashed this one and seems to be fine so far!
I'm waiting for the RC version and a possibility to OC.

Thank you!

Acceleration is not working, when you change the frequency with my pimp cpu does not change, and in the monitoring shows only 1 core!
 

spica1234

Retired Recognized Developer
Aug 1, 2010
3,081
3,362
India
Originally Posted by remczar69
Good to see you working on CM9 spica. I have been using your kernels since the first HP for GB.
I have flashed this one and seems to be fine so far!
I'm waiting for the RC version and a possibility to OC.

Thank you!

Acceleration is not working, when you change the frequency with my pimp cpu does not change, and in the monitoring shows only 1 core!
I use default settings-performance-max freq to 1200
It activated on demand if you want it to get activated earlier then set min cpu1 on freq to 503 in HP 2x tweaker app

Sent from my LG-P990 using xda premium
 
  • Like
Reactions: remczar69

remczar69

Senior Member
Dec 7, 2010
287
46
Does it really? so what app or maybe yours HorsePower 2x OTF Kernel should I use to OC?

I have previously used Set CPU, but I'm not sure if it works with ICS.
If this is possible with your app, could you please give me some directions what to change, to get 1.2GHz? I'm a bit noob in this subject and don't want to crash my phone, so I have to flash everything from scratch :)
I don't want to UV cause my device doesn't like it :D

Thanks again for your great work.
 

spica1234

Retired Recognized Developer
Aug 1, 2010
3,081
3,362
India
Does it really? so what app or maybe yours HorsePower 2x OTF Kernel should I use to OC?

I have previously used Set CPU, but I'm not sure if it works with ICS.
If this is possible with your app, could you please give me some directions what to change, to get 1.2GHz? I'm a bit noob in this subject and don't want to crash my phone, so I have to flash everything from scratch :)
I don't want to UV cause my device doesn't like it :D

Thanks again for your great work.

No you can oc without any application open settings performance CPU frequency and in Max frequency set 1200

Sent from my LG-P990 using xda premium
 
  • Like
Reactions: remczar69

remczar69

Senior Member
Dec 7, 2010
287
46
Great, thanks.
I was writing my post when you wrote yours, so i didn't get to see the answer before I posted.
Works great. Thanks

@Thief777:
The SystemPanelLite shows 2 cores on my device.
 

slebit

Senior Member
Dec 3, 2010
2,537
1,564
Thanks for this awesome kernel, it is run really smooth. Is there any recommended changes to do in hp tweaker app or is it ready to use as it is?

Sent from my LG-P990 using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 100
    Hello all to CM world.
    As I'm new to CM world. First I would like to thanks the real HEROS.

    My credits goes below:

    -armcee (The main maintainer developer of CM family for LG 2X Devices)
    -Faux123
    -Vadonka(A great salute to him, He is a real good developer , with a very good nature, He always has helped me alot, this kernel has base ICS source of vadonka))
    -and everybody who made their work available as sources via GPL, Sorry,If I forgot anybody's name

    WorkShop has just begun, Welcome to whereever you're!

    Cryptic Changelogs History

    +(RC1-R) Fully Optimized for 10% more responsiveness and UI fluidity than all previous HP ics builds (RC1-R)
    +(RC1-R) very quick application opening and multi tasking than all previous HP ics builds (RC1-R)
    +(RC1-R) Low Latency Relatime Processing optimized, Application opening extra smooth than all previous HP ICS builds (RC1-R)
    +(RC1-R) Fully optimized for 2D accelarated UI smoothness and responsvieness(Although in impresence of full GPU accelaration) (RC1-R)
    +(RC1-R) OTF gpu ram hack(Thanks to vadonka) (RC1-R)
    +(RC1-R) Full fixed mobile data usage limit ( Thanks to harsh bhaila) (RC1-R)
    +(RC1-R) Fully KSM(Kernel Samepage Merging) compatible (RC1-R)
    +(RC1-R) hybrid tool chain compilation. Modules seperately compiled with gcc-4.5 for more run time stability, while seperately kernel compilation with gcc-4.7(seems stable than 4.6) (RC1-R)
    +(RC1-R) More Robust charging BSOD prevention than all previous HP ics builds (RC1-R)
    +(RC1-R) More freeze free than all previous HP ics builds (RC1-R)
    +(RC1-R) OpenGL and ELS optimized by GCC Flags(smoother game play) (RC1-R)
    +(RC1-R) OTF application now saving values after re-opening (RC1-R)
    +(RC1-R) 20% more battery life rather than previous hp builds (RC1-R)
    +(RC1-R) More ROBUST memory management after days constant usage (RC1-R)
    +(RC1-R) More CrystalClear voice definition(16Bits/96KHz) during media playback and optimized InCall volume frequency(RC1-R)
    +(RC1-R) Fully overall optimization to feel not the impresence of GPU accelaration (RC1-R)
    +(RC1-R) Multi-Thread Thumb-2 GCC optimizations for cortex-a9 multi-core performance (RC1-R)
    +(RC1-R) Fully GCC ARM Graphite code implementation for faster loop unrolling and faster do -go to- kernel codes access (RC1-R)
    +(RC1) Reboot/reboot to recovery fixed(after pressing reboot/reboot to recovery wait atleast 5 secs) (RC1)
    +(RC1) sr2 gb battery driver included seem to provide good battery life (RC1)
    +(RC1) ICS related remaining vadonka's ics branch changes merged(thanking once again vadonka) (RC1)
    +(RC1) HW accelarated 24bits 48khz codec audio media playback instead 16/44.1khz.And voice codec and BaseBand controlled voice over call mono bits setted to 16Bits instead of 8bits for enhanced VoiceClarity (RC1)
    +(RC1) OTF controled thermal protection added in battery driver, which regulate smart auto powersave profile switching to prevent overheat generated BSOD ,providing more robust control(up to 95%) to prevent charging bsod (RC1)
    +(RC1) OTF remastered to be more specific compatible with ICS (RC1)
    +(RC1) Full OTF2.1 (OTF By Spica & Vadonka) (RC1)
    +(RC1) Many proven SR3R2's performance and stability oriented work merged (RC1)
    +(RC1) Modified Tocuh Release Pressure for smoother touch responsiveness (RC1)
    +(RC1) More longer battery life then TestBuild(RC1)
    +(TestBuild)Based on CM ICS sources (TestBuild)
    +(TestBuild) Merged many ICS related fixes from Vadonka(Big thanks to Vadonka) (TestBuild)
    +(TestBuild) All my previous HP GB's Memory leaks changes merged(TestBuild)
    +(TestBuild) Almost nill (Up to 90%) charging-BSOD Free (TestBuild)

    If you appreciate my work then feel free to DONATE to Support My O2X Development

    Recommendation for HP ICS Kernels for maxium performance:
    (*) Apex Launcher
    (*) Settings-> Performance -> Memory Management -> Kernel Samepage Merging
    (*) Settings -> Performance -> Scrolling Cache-> Default Disable (Thanks to Owain)
    (*) Settings -> Developer Options-> Force GPU Rendering(May perform better regarding apps-opening responce and overall smoothness or may perform worst, test it yourself)
    (*) Settings -> Developer Options -> Windows Animation Scale ->0.5x

    OTF GPU Usage(Credits to Vadonka):

    To apply your desired RamHack, follow these steps:

    -Open Terminal Emulator
    -write command 'su'
    -write command 'rh'
    -select your ramhack by enter value eg. 2 and then press enter
    -wait till it shows finished message
    -then write command 'sync && reboot' Mobile will be reboot with your ramhack value. Ramhack recommendations 32mb/48mb
    Enjoy the ramhack.

    HP ICS 2x eXtreme RC1-R

    Downloads:
    http://min.us/mWnE57Vqx


    Older Downloads:

    HP ICS RC1 2x eXtreme
    Downloads:
    http://db.tt/aFRJq2vZ

    HP ICS TEST BUILD
    Download
    http://db.tt/Ll6Smcez

    Source:https://github.com/spica234/HP-CM9-Kernel-32 (as of poor upload bandwidth changes merged with vadonka's ics stream,as many parts related ICS merged from Vadonka's ICS stream
    21
    Horse Power 2x eXtreme RC1-R ICS Kernel released!

    Horse Power 2x eXtreme RC1-R ICS Kernel
    Changelogs:
    +(RC1-R) Fully Optimized for 10% more responsiveness and UI fluidity than all previous HP ics builds (RC1-R)
    +(RC1-R) very quick application opening and multi tasking than all previous HP ics builds (RC1-R)
    +(RC1-R) Low Latency Relatime Processing optimized, Application opening extra smooth than all previous HP ICS builds (RC1-R)
    +(RC1-R) Fully optimized for 2D accelarated UI smoothness and responsvieness(Although in impresence of full GPU accelaration) (RC1-R)
    +(RC1-R) OTF gpu ram hack(Thanks to vadonka) (RC1-R)
    +(RC1-R) Full fixed mobile data usage limit ( Thanks to harsh bhaila) (RC1-R)
    +(RC1-R) Fully KSM(Kernel Samepage Merging) compatible (RC1-R)
    +(RC1-R) hybrid tool chain compilation. Modules seperately compiled with gcc-4.5 for more run time stability, while seperately kernel compilation with gcc-4.7(seems stable than 4.6) (RC1-R)
    +(RC1-R) More Robust charging BSOD prevention than all previous HP ics builds (RC1-R)
    +(RC1-R) More freeze free than all previous HP ics builds (RC1-R)
    +(RC1-R) OpenGL and ELS optimized by GCC Flags(smoother game play) (RC1-R)
    +(RC1-R) OTF application now saving values after re-opening (RC1-R)
    +(RC1-R) 20% more battery life rather than previous hp builds (RC1-R)
    +(RC1-R) More ROBUST memory management after days constant usage (RC1-R)
    +(RC1-R) More CrystalClear voice definition(16Bits/96KHz) during media playback and optimized InCall volume frequency(RC1-R)
    +(RC1-R) Fully overall optimization to feel not the impresence of GPU accelaration (RC1-R)
    +(RC1-R) Multi-Thread Thumb-2 GCC optimizations for cortex-a9 multi-core performance (RC1-R)
    +(RC1-R) Fully GCC ARM Graphite code implementation for faster loop unrolling and faster do -go to- kernel codes access (RC1-R)


    If you appreciate my work then feel free to DONATE to help me buy a new Primary Hard Disk sooner, as my main primary hard disk is fully damaged(Thanks to everyone who donated, i've gathered 65% funds through donation plus some amounts of my salary for a new HD. Thanks to everybody who donated till now

    Recommendation for HP ICS Kernels for maxium performance:
    (*) Apex Launcher
    (*) Settings-> Performance -> Memory Management -> Kernel Samepage Merging(as this buid is KSM supported)
    (*) Settings -> Performance -> Scrolling Cache-> Default Disable(Thanks to Owain)
    (*) Settings -> Developer Options-> Force GPU Rendering (May perform better regarding smoothness and apps opening responce or worst, test it yourself)
    (*) Settings -> Developer Options -> Windows Animation Scale ->0.5x

    OTF GPU Usage(Credits to Vadonka):

    To apply your desired RamHack, follow these steps:

    -Open Terminal Emulator
    -write command 'su'
    -write command 'rh'
    -select your ramhack by enter value eg. 2 and then press enter
    -wait till it shows finished message
    -then write command 'sync && reboot' Mobile will be reboot with your ramhack value. Ramhack recommendations 32mb/48mb
    Enjoy the ramhack.

    HP ICS 2x eXtreme RC1-R

    Downloads:
    http://db.tt/rSWsbLFf
    18
    HP PreRC2 SuperSonic ICS TestBuild

    HP 2x ICS SuperSonic PreRC2 TestBuild:

    Changelogs:


    +Compiled with HP Pro SuperSonic Toolchain, Optimized for ARM Multi-Threading
    +Fixed touch screen issues with latest build (Credits to Harsh)
    +Fixed UMS (Needs testing)(Credits to Harsh)
    +Optimized for better PowerManagement
    +Optimized for better scrolling & speed


    Download:


    https://www.dropbox.com/sh/bsppsu5uxo2v6on/hhlZstZ363/HP_2x_ICS_SuperSonic_PreRC2_TestBuild.zip
    13
    Ok RC1 is out. For changelogs and downloads reffer 1st page:)

    Sent from my LG-P990 using xda premium
    12
    5 days without an update :-( you devs Made me to a flashaholic need to flaaaaaaash hihi

    Gesendet von meinem LG-P990 mit Tapatalk

    Lol. Yes as I said earlier next kernel will be 3.0 Kernel. I need to merge every of my OTF and other function manually so it'l take time. Till then you can enjoy the goodies of last release kernel. It's already smooth and effecrtive battery life;)