Hi Everyone,
I was a little bored of waiting for root on my mobile.
So I decided to flush my warranty and rip that ***** apart
Screws where taken out very fast.
But the hole thing was additionally clipped all around.
I started from top, where a credit card had enough space to get between the housing parts.
Then I moved once around an the back was taken off...
To disassemble the remaining parts was piece of cake.
I didn't manage to split the Frontwindow and Display, so I left it.
At least also to not get any dust underneath.
While it was open, I decided to de-solder the white keypad lightning and resoldered it with amber coloured LEDs, to match the phone even more with my cars interior light.
Kind regards,
McK
P.S.: The pictures were taken at full 8mpix. If anyone can provide some webspace, I'd send 'em to him. But I dislike to use freehosters, so pls don't point me at 'em.
Just a note to all Bloggers and Newsservices out there:
With this lines I set the pictures under Copyleft.
So feel free to use them, as long as you mention this thread.
-------------------------------
Edith says: Just updated with larger shots
More shots on 2nd page .
-----------------------------------
Edith yells again: UltraNEO* has made some cool close up shots and posted them here on page 10:
X10 with back removed
Camera Module (Lens)
Camera Module (Rear)
Camera Module (detached with part/model number - perhaps)
Display Module (disassembled with LED backlights showing)
Touchscreen Module (with padding)
Touchscreen Module (without padding)<br>
Status indicator & ambient light sensor
-----------------------------------
Edith was around and says:
User ****nap finished the first "Startrooper" Phone.
Here are the Pics:
Finished Phone:
Disassembled touch module:
---------------------------------------
Edith beeps:
biktor_gl ripped the sticker, that is placed in the back of X10 to show us some pinouts:
I was a little bored of waiting for root on my mobile.
So I decided to flush my warranty and rip that ***** apart
Screws where taken out very fast.
But the hole thing was additionally clipped all around.
I started from top, where a credit card had enough space to get between the housing parts.
Then I moved once around an the back was taken off...
To disassemble the remaining parts was piece of cake.
I didn't manage to split the Frontwindow and Display, so I left it.
At least also to not get any dust underneath.
While it was open, I decided to de-solder the white keypad lightning and resoldered it with amber coloured LEDs, to match the phone even more with my cars interior light.
Kind regards,
McK
P.S.: The pictures were taken at full 8mpix. If anyone can provide some webspace, I'd send 'em to him. But I dislike to use freehosters, so pls don't point me at 'em.
Just a note to all Bloggers and Newsservices out there:
With this lines I set the pictures under Copyleft.
So feel free to use them, as long as you mention this thread.
-------------------------------
Edith says: Just updated with larger shots
More shots on 2nd page .
-----------------------------------
Edith yells again: UltraNEO* has made some cool close up shots and posted them here on page 10:
X10 with back removed
Camera Module (Lens)
Camera Module (Rear)
Camera Module (detached with part/model number - perhaps)
Display Module (disassembled with LED backlights showing)
Touchscreen Module (with padding)
Touchscreen Module (without padding)<br>
Status indicator & ambient light sensor
-----------------------------------
Edith was around and says:
User ****nap finished the first "Startrooper" Phone.
Here are the Pics:
Finished Phone:
Disassembled touch module:
---------------------------------------
Edith beeps:
biktor_gl ripped the sticker, that is placed in the back of X10 to show us some pinouts:
Last edited: