V6 SuperCharger Script Install Instructions
Here are instructions to install the V6 SuperCharger Script. I'm running out of room in the OP, so I'll link to this post.
1) Download the most recent version of the script from the link below. Script/file should be "V6_SuperCharger_for_Android-update9_RCx.x.sh.pdf" (where x.x is the most recent build #).
http://xdaforums.com/showthread.php?p=18703418#post18703418
2) Place the .pdf file on your micro sd card (default sdcard in CM7).
3) Download Script Manager
4) Open Script Manager, then go to -> Menue -> More -> Advanced Options -> Config -> Select Browse As Root. Then allow super user permission when you exit out.
5) Navigate to the supercharger .pdf file you have on your device in Script Manager.
6) Select the .pdf, and then check Run as Root
7) Navigate through the menu, selecting the speed (select slow, so you can read everything).
8)Select NO when asked for system integration of "init.rc"
9) Select #9, when asked for Option 1 - 30
10) After install, I exited out of Script Manager, and then rebooted.
11)After reboot, navigate to /system/etc/init.d, and delete "99SuperCharger script"
12)Use Script Manager, and navigate to /data, and select "99SuperCharger.sh", and check Run as Root & Run at Boot. Save. Then Exit. Then Reboot.
13)After reboot and launcher loads, you should see a message "Script Manager has been granted super user permission" pop up to let you know the script loaded.
Think that's it... make sure your not stoping script manager from loading at start up with auto start or some other app, that you may have disabled it to start script manager from loading at boot.
Here is a visual guide. The steps in this post may be different than the ones above; use this for a visual reference.
http://xdaforums.com/showthread.php?t=1126940
UPDATE:
V6 SuperCharger has been updated to RC5. System integration is finally working, so there is no need to run script manager at boot anymore.
What I did:
- Use current V6 script to un-charge device (option #15)
*No need to reboot yet
- Download new V6 RC5 Script
http://xdaforums.com/showpost.php?p=18703418&postcount=5021
- Run new script with script manager (make sure to choose run as root in script manager options)
- Choose Yes for system integration
- I choose NO for useing old settings when it finds them
- Choose #9 for 1000+ HP SuperCharger.
- Choose Yes for reboot and cleanup (this will wipe you dalvik cache, so be patient on reboot)
If you had previously been using Script Manager to run your older version of V6, you may also want to:
- After reboot, go back to Script Manager, select Menu Burton -> List
- Select 99SuperCharger, then "delete config". This was the supercharger script you had been running at boot with script manager, on the previous supercharger version.
- Select your older versions of SuperCharger Script, then "delete config".
- Reboot. Script manager should no longer be running at boot; i.e. you should no longer see "Script Manager has been granted Super User Permission"
- Re-run the V6 script and confirm everything has been loaded and is working. When prompted for a option again, if you scroll up, you should see:
"Launcher is DIE-HARD...
SuperCharger ADJ Entires Found in local.prop!
OOM Groupings Fixes ARE in Effect!
Current Values MATCH Prior SuperCharge!
Current Minfrees = 8, 16, 200, 220, 240, 275 MB"
*Note: The script/settings are now intagrated and run at boot, however, the script is set to run 90 sec after the OS boots... so give it a minute before you go testing it.
Here are instructions to install the V6 SuperCharger Script. I'm running out of room in the OP, so I'll link to this post.
1) Download the most recent version of the script from the link below. Script/file should be "V6_SuperCharger_for_Android-update9_RCx.x.sh.pdf" (where x.x is the most recent build #).
http://xdaforums.com/showthread.php?p=18703418#post18703418
2) Place the .pdf file on your micro sd card (default sdcard in CM7).
3) Download Script Manager
4) Open Script Manager, then go to -> Menue -> More -> Advanced Options -> Config -> Select Browse As Root. Then allow super user permission when you exit out.
5) Navigate to the supercharger .pdf file you have on your device in Script Manager.
6) Select the .pdf, and then check Run as Root
7) Navigate through the menu, selecting the speed (select slow, so you can read everything).
8)
9) Select #9, when asked for Option 1 - 30
10) After install, I exited out of Script Manager, and then rebooted.
11)
12)
13)
Think that's it... make sure your not stoping script manager from loading at start up with auto start or some other app, that you may have disabled it to start script manager from loading at boot.
Here is a visual guide. The steps in this post may be different than the ones above; use this for a visual reference.
http://xdaforums.com/showthread.php?t=1126940
UPDATE:
V6 SuperCharger has been updated to RC5. System integration is finally working, so there is no need to run script manager at boot anymore.
What I did:
- Use current V6 script to un-charge device (option #15)
*No need to reboot yet
- Download new V6 RC5 Script
http://xdaforums.com/showpost.php?p=18703418&postcount=5021
- Run new script with script manager (make sure to choose run as root in script manager options)
- Choose Yes for system integration
- I choose NO for useing old settings when it finds them
- Choose #9 for 1000+ HP SuperCharger.
- Choose Yes for reboot and cleanup (this will wipe you dalvik cache, so be patient on reboot)
If you had previously been using Script Manager to run your older version of V6, you may also want to:
- After reboot, go back to Script Manager, select Menu Burton -> List
- Select 99SuperCharger, then "delete config". This was the supercharger script you had been running at boot with script manager, on the previous supercharger version.
- Select your older versions of SuperCharger Script, then "delete config".
- Reboot. Script manager should no longer be running at boot; i.e. you should no longer see "Script Manager has been granted Super User Permission"
- Re-run the V6 script and confirm everything has been loaded and is working. When prompted for a option again, if you scroll up, you should see:
"Launcher is DIE-HARD...
SuperCharger ADJ Entires Found in local.prop!
OOM Groupings Fixes ARE in Effect!
Current Values MATCH Prior SuperCharge!
Current Minfrees = 8, 16, 200, 220, 240, 275 MB"
*Note: The script/settings are now intagrated and run at boot, however, the script is set to run 90 sec after the OS boots... so give it a minute before you go testing it.
Last edited: