Samsung Fascinate SCH-I500 flash to Straight Talk
- Thread starter modman72
- Start date
Hey brother. I was able to get talk and sms to work but no data... I tried everything. I was able to follow your directions to a "T", however the one thing I could not do step 14
For whatever reason when I do it from DFS my spc is 000000 however following your directions in step 14 above this does not work. SPC 000000 is not right. I have read about MSL? Is this what I need? Again I used your pics to verify copied my AAA and HA keys, created a DMU folder etc etc and the phone works, I can make calls (SWEET) but no data and I tried like 10 times doing the steps over and over again.
ok for people coming from other networks i was on us cellular will also work on cricket version and so on you need to load the prl for verizon with cdma workshop to make it dial up to straight talk instead of us cellular or other providers after you et the esn changed
1. reopen cdma workshop and open port to phone
2. MAKE SURE THE RIGHT PORT IS SELECTED FOR YOUR DEVICE. CLICK ON THE TOP LEFT BUTTON CALLED "Ports". DOUBLE CLICK YOUR DEVICE. It will be the one that says "Samsung Diagnostic Modem"... or something equivalent. Diagnostic being the key word. You know you are connected to the phone properly when all the information on the main screen fills in with YELLOW text and tells you everything you may (or may not) have wanted to know about the phone.
3. Go back to the Main DFS Screen.
4. You will need the password to unlock the SCH-I500: 2010031619780721.
5.IN THE SPC THE NUMBERS, it should already have 000000 IN IT. CLICK ON THE RUN BUTTON to the Left of the SPC number. In the "Logging Window" that floats to the side, IT SHOULD SAY "Device Unlocked". THEN enter the 16 digit code in the PWD block at the top of DFS program. Click run to the left of the PWD Numbers and it should say "Device Unlocked" again.
6. go to program tab the nam tab under that
7.go over to prl load the verizon prl ( i also read and saved mine first just in case i want to go back to us cellular)
8. then hit write
9.Then hit reset on the DFS main screen. [TOP RIGHT CORNER]
10. thats it now activate it
You're a life saver! I've been trying to write a MEID (for another purpose) to my Fascinate. The value would not stick because I wasn't entering the password. Thanks so much!
Hey man I've sent you 2 PMs , hope your ok. Wish could give some advise on not being able to get data but everythig else works... please help me if you can.
Thanks
Sent from my SCH-I605 using xda premium
This is not a ROM. This is a discussion thread on how to setup your Verizon Fascinate to work with a Straight Talk pre-paid plan.
Sent from my Nexus 7
Sent from my Nexus 7
GREAT info in this thread, exactly what i was looking for...
Thanks sooo much!
EDIT: 4G is not possible with the Samsung Fascinate (i1500) phone, is it?
Thanks in advance...
Thanks sooo much!
EDIT: 4G is not possible with the Samsung Fascinate (i1500) phone, is it?
Thanks in advance...
Nope this phone would be damn near perfect if it did lol
Sent from my SCH-I500 using Tapatalk 2
It might if you have a cspire phone you could switch id's with. Does cspire use Verizon's towers?
Sent from my Nexus 7
BBrad answered it for me. Any other way?
Sent from my SCH-I500 using Xparent Skyblue Tapatalk 2
Last edited:
get a CDMA donor Phone
Hi all,
I'm looking to switch my fascinate to Straight Talk, and from what I read, I can't use the ESN from a Straight Talk GSM phone to clone to my fascinate, and that I would need an ESN from a CDMA Straight Talk donor phone? Right now, Walmart is only offering GSM phones for cheap with a straight talk plan. If I can only use a CDMA phone as an ESN donor, does anyone know where I can get a really cheap straight talk cdma phone?
Thanks,
Sean
Hi all,
I'm looking to switch my fascinate to Straight Talk, and from what I read, I can't use the ESN from a Straight Talk GSM phone to clone to my fascinate, and that I would need an ESN from a CDMA Straight Talk donor phone? Right now, Walmart is only offering GSM phones for cheap with a straight talk plan. If I can only use a CDMA phone as an ESN donor, does anyone know where I can get a really cheap straight talk cdma phone?
Thanks,
Sean
Last edited:
I buy my cdma phones from straighttalk.com......lg220c would do just fine......it comes with the $45 plan included......
Hit thanks if this helped......
K
Sent from my SPH-L710 using xda premium
Thanks, but I don't see the lg220c available on straighttalk.com. The cheapest CDMA phone they have is $30 in addition to the plan. I was talking about the free to $15 dollar range like that Walmart has. Mostly I want to sell my Fascinate after it's activated on StraightTalk so I can upgrade to a better phone. Therefore, I'm trying to get as cheap a donor as possible, so I don't lose money selling my fascinate.
I just ordered two of them for customer flash about 10 minutes ago.....I don't know where you are going but I open up to where it says buy new phone... I just add the zip code in and then it opens up to let me order the reconditioned lg220c with the $45 plan for about $52 each...as I said I just ordered it so it's like getting the phone for $5 plus the$45 unlimited plan.....
Again if I helped please hit the thanks button............,>>>>>>
K
Sent from my SPH-L710 using xda premium
For the record this is the one you want to purchase....
K
Sent from my SPH-L710 using xda premium
Attachments
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
101. First buy a Straight Talk for walley world .com get the LG220.
(Its $45 with one month unlimited everything with free shipping.)
2.Then activate it .
3.Download the drivers for the Samsung Fascinate SCH-I500 making sure you get 32 bit or 64 bit which ever machine have it installed.
4.Download DFS you have to ativate the software though their site after you install it.
5.You will need to put the http://xdaforums.com/showthread.php?t=1209992
6.Then dial **87284 put both options in modem mode
7.When plug the phone in it should tell you its found new hardware and ask for drivers
8.Then run DFS
9.Go manager in DFS your Samsung Fascinate SCH-I500 should show up select it
(sometimes you need to put the phone in dial mode dial **33284 then enter 000000 in the block for SPC)I think.
10.Then you will need the password to unlock the SCH-I500 its a 16 digit number you can find it online
11.Enter it in the PWD block at the top of DFS program it will tell you its unlocked.
12.Then read the phone write the ESN down just in case want put back.
13.Then enter the 20 digit number that on your straight talk green card enter it in the MIED block
14.Hit write it will do it real quick
15.Then hit reset from the reset from DFS
16.OK to active it might try to dial Verizon if activate and the Emergency buttons are at the bottom hit the Emergency *#83786633 then dial *22890 it will program
17.OK then dial *22891 to update roaming
18.Set up a gmail account then market and the internet will work.
Good luck
Modman724Updated Guide with some clarification of steps.
Gentlemen,
I went through the process tonight and everything worked great but I found some confusing parts in the process for a dummy like me so I added some clarification to the process to be a bit more literal for the slower folks in the crowd out there, like myself. Hope it helps.
*** UPDATED GUIDE - 12/21/12 ***
1. First buy a Straight Talk from Walmart.com or straightalk.com. Get the LG220C (Refurbished if needed, it will be a clean phone and works all the same). (Its $45 with one month unlimited everything with free shipping.)
2. ** DO NOT ACTIVATE IT. DON'T EVEN TURN IT ON. THAT'S WHERE THINGS GET MESSED UP OVER THE NETWORK. IF YOU HAVE ACTIVATED IT ALREADY THEN YOU MIGHT HAVE TO GET ANOTHER ONE. THIS IS ONE OF THE ONLY THINGS I DID DIFFERENT AND NOW EVERYTHING WORKS ON MY FASCINATE. **
3.Download the drivers for the Samsung Fascinate SCH-I500 making sure you get 32 bit or 64 bit which ever machine have it installed.
4.Download DFS (as of this posting 4.0.2.0 is the most current). YOU DO NOT NEED TO BUY THEIR PRODUCT, EVEN THOUGH IT SEEMS LIKE YOU DO. Just make an account (using the software) and login.
5.*** THE PHONE MUST BE STOCK VERIZON !!!! *** NO, CUSTOM IMAGES!!! I used EH03 Stock Build. You need to put the phone in Debugging Mode & Allow Unknown Sources.
6. Dial **87284 put both options (UART & USB) in modem mode.
6a. Then dial **33284 and enter 000000 in the block for SPC. SCROLL TO THE BOTTOM AND FIND "Dial-UP Networking". Select ON. Backup one screen and select "Port Map" Set it to hkf & diag. It was already enabled on my phone.
7.Then plug the phone in to your PC. It should tell you its found new hardware and ask for drivers
8. Run DFS. MAKE SURE THE RIGHT PORT IS SELECTED FOR YOUR DEVICE. CLICK ON THE TOP LEFT BUTTON CALLED "Ports". DOUBLE CLICK YOUR DEVICE. It will be the one that says "Samsung Diagnostic Modem"... or something equivalent. Diagnostic being the key word. You know you are connected to the phone properly when all the information on the main screen fills in with YELLOW text and tells you everything you may (or may not) have wanted to know about the phone.
9. Go back to the Main DFS Screen.
10. You will need the password to unlock the SCH-I500: 2010031619780721.
11.IN THE SPC THE NUMBERS, it should already have 000000 IN IT. CLICK ON THE RUN BUTTON to the Left of the SPC number. In the "Logging Window" that floats to the side, IT SHOULD SAY "Device Unlocked". THEN enter the 16 digit code in the PWD block at the top of DFS program. Click run to the left of the PWD Numbers and it should say "Device Unlocked" again.
12. IN THE VERSION I'M USING, YOU HAVE TO CLICK ON THE PROGRAMMING TAB TO BRING UP THE MEID OPTIONS. ITS IN THE CENTER COLUMN HALF WAY DOWN. Click the "read" button next to the ESN information. Write it down just in case want put back.
13.Then enter the 20 digit MEID number that's on your straight talk green card (and also on your phone) in the MEID DEC box, (NOT the HEX).
14.Hit "Write". It will do it real quick.
15.Then hit reset on the DFS main screen. [TOP RIGHT CORNER]
16. At this point, the phone will come back & be basically brand-new. You have to select your language and then you will only have the "Emergency" & "Activate" buttons. You DO NOT want to ACTIVATE. It will attempt to call Verizon and not do you any good. Instead, PUT THE PHONE DOWN and go to the Straight Talk Website. "Activate" the new MEID that you just programmed into the Fascinate and that was provided to you on the phone and GREEN card. The Straight Talk website will also ask you for the "Service PIN", this is the $45 for Phone / Data you paid for. *** SPECIAL NOTE: You have the option of "porting" a phone number over from another Carrier as you are activating the LG220 MEID. i.e. Verizon. You HAVE to know your full account number, password, last 4 digits of SSN, and billing address of your VERIZON account. IF you choose to port your number over, it says it can take 2 business days; mine took 15 minutes, your results may vary. Once that is all done, the Straight Talk MEID is activated and your newly programmed Fascinate will be ready to come to life (soon). Straight Talk will show the phone as the LG220 you bought, but you took that MEID from the LG220 and put it into the brains of your Fascinate (that's what DFS does).
16a. Pick your phone back up and at the screen with the 2 buttons for "Emergency" and "Activate", press Emergency and Dial *#83786633. A message will pop up that says "Soft Keys enabled". This will allow you to hit the HOME button and get to the normal desktop and give you access to the Phone Dialer. Thereby, avoiding the "Verizon" Activate button that you would've otherwise been forced to use. Use the Phone Dialer to dial *22890, this is Straight Talks number to Program the phone. **NOTE ** If you ported another number over from your old Carrier (i.e. Verizon), This number "may" not answer right away or not work. I "think" the porting has to be complete before it can program you. If you did not Port your number over, then you should be good to go right away.
17. Once that gets done, use the phone dialer again and dial *22891 to update roaming. Once that Completes, make a test call.
18. Once again, DIAL **33284, and UN-SELECT DIAL UP MODE FROM THE BOTTOM. THAT WILL ENABLE DATA.
19. Everything should be live: Phone, Data, Texting. You should have 3g, not 1x or anything like that.
20. At this point, you should be able to put any Custom ROM back on the phone that you want. Welcome to Straight Talk.4Alright!! Those having problems not being able to get calling, texting, or data(or some combination of the three) Here is what I did. It's almost the exact same as post #1 with some tweaks, indicated by brackets and capitol letters in the brackets.ei [MY INSERTIONS]
1. First buy a Straight Talk from Walmart.com or straightalk.com. Get the LG220C.
(Its $45 with one month unlimited everything with free shipping.)
2.[DO NOT ACTIVATE IT. DON'T EVEN TURN IT ON. THAT'S WHERE THINGS GET MESSED UP OVER THE NETWORK. IF YOU HAVE ACTIVATED IT ALREADY THEN YOU MIGHT HAVE TO GET ANOTHER ONE. THIS IS ONE OF THE ONLY THINGS I DID DIFFERENT AND NOW EVERYTHING WORKS ON MY FASCINATE]
3.Download the drivers for the Samsung Fascinate SCH-I500 making sure you get 32 bit or 64 bit which ever machine have it installed.
4.Download DFS [I HAPPEN TO BE USING VER. 3.3.0.7] you have to activate the software though their site after you install it.[YOU DO NOT NEED TO BUY THEIR PRODUCT, EVEN THOUGH IT SEEMS LIKE YOU DO. JUST ACTIVATE IT]
5.You will need to put the [FASCINATE IN USB DEBUGGING MODE AND ALLOW UNKNOWN SOURCES]
6.Then dial **87284 put both options in modem mode[sometimes you need to put the phone in dial mode. dial **33284 then enter 000000 in the block for SPC. SCROLL TO THE BOTTOM AND IT'S THE BOTTOM OPTION. SELECT IT ON]
7.Then plug the phone in it should tell you its found new hardware and ask for drivers
8.Then run DFS[MAKE SURE THE RIGHT PORT IS SELECTED FOR YOUR DEVICE. CLICK ON THE TOP LEFT BUTTON CALLED "Ports". DOUBLE CLICK YOUR DEVICE]
9. Go back to the main screen
10.Then you will need the password to unlock the SCH-I500 [HERE'S THE NUMBER: 2010031619780721. NOT SURE WHY HE DIDN'T PUT IT ON HERE]
11.IN THE SPC THE NUMBERS SHOULD ALREADY HAVE 000000 IN IT. CLICK ON THE RUN BUTTON. AT THE BOTTOM OF DFS IT SHOULD SAY "Unlocked". THEN enter the 16 digit code in the PWD block at the top of DFS program. Click run and it will say unlocked again.
12.[IN THE VERSION I'M USING YOU HAVE TO CLICK ON THE PROGRAMMING TAB TO BRING UP THE MEID OPTIONS. ITS IN THE CENTER COLUMN HALF WAY DOWN] Then "read" the phone's ESN. Write it down just in case want put back.
13.Then enter the 20 digit number that's on your straight talk green card [IT'S ALSO ON THE BACK OF THE PHONE UNDE THE BATTERY], enter it in the MEID block under the DEC, (NOT the HEX).
14.Hit "Write". It will do it real quick
15.Then hit reset from the reset from DFS. [TOP RIGHT CORNER]
16.OK to active it might try to dial Verizon if activate and the Emergency buttons are at the bottom hit the Emergency *#83786633 then dial *22890 it will program
17.OK then dial *22891 to update roaming[MAKE A TEST CALL]
18.[DIAL **33284 AGAIN. UN-SELECT DIAL UP MODE FROM THE BOTTOM. THAT WILL ENABLE DATA]
(Hopefully my modifications make it work for those that are having problems. It worked for me.2When mine was doing that, it was cuz it wasn't reaching the Verizon activation servers because I did it about 1230 am Central time, and their servers go down for maintenance then. Try it in the middle of the day. Also, are you using an MEID from a deactivated phone? It can't be activated until AFTER you write it to the Fascinate. And also, you need an Unlimited Plan, or it won't work right.
Sent from my Straight Talk Fascinate using xda premium2
Why would you pay someone for it?... Just register here (I can't post direct links since I don't have 10 posts, but add the www infront of it..)
cdmatool.com/register.aspx and download here cdmatool.com/Download.aspx then just login with whatever account you registered.. I think it'll say demo mode, but it won't expire and you will have access to everything you need
