Good Day!
I have a kcc-cmm-sec-shve330k 32GB that i flashed using odin 3.09 and E330KKKUBML1_FULL_20140103.tar but it failed!
here is what happened with odin,
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330KKKUBML1_FULL_20140103.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> tz.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sdi.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> recovery.img
<ID:0/008> NON-HLOS.bin
<ID:0/008> modem.bin
<ID:0/008> hidden.img.ext4
<ID:0/008> boot.img
<ID:0/008> aboot.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) i dont have any clue why it works with others and not with my cp
this fw (E330KKKUCNC1_PROXYME20140319.tar) is ok and it works for me and im using it but this has issues with apps working on 4.2 and not working in 4.4. like my navigator sygic. any suggestions guys ???
Another question is, Is it normal that after flashing for few times testing 4.3 & 4.4 FW that when it done, all my sms, apps, name of carrier Oleh is there and not erased?
Thanks in advance!
I have a kcc-cmm-sec-shve330k 32GB that i flashed using odin 3.09 and E330KKKUBML1_FULL_20140103.tar but it failed!
here is what happened with odin,
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330KKKUBML1_FULL_20140103.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> tz.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sdi.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> recovery.img
<ID:0/008> NON-HLOS.bin
<ID:0/008> modem.bin
<ID:0/008> hidden.img.ext4
<ID:0/008> boot.img
<ID:0/008> aboot.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) i dont have any clue why it works with others and not with my cp
this fw (E330KKKUCNC1_PROXYME20140319.tar) is ok and it works for me and im using it but this has issues with apps working on 4.2 and not working in 4.4. like my navigator sygic. any suggestions guys ???
Another question is, Is it normal that after flashing for few times testing 4.3 & 4.4 FW that when it done, all my sms, apps, name of carrier Oleh is there and not erased?
Thanks in advance!