[GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter

Search This thread
By:
Advanced…
thmls

thmls

Senior Member
Sep 29, 2012
221
25
athens
Hello everyone
with Odin tried to flash on my phone the last frim. jb
in the last step i put out the cable from my phone
Now with my phone not open




(Do NOT unplug the usb cable before ODIN finishes its job.


If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
Then you can remove the usb cable.)



what do I do now?
 
shut_down

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
thmls said:
Hello everyone
with Odin tried to flash on my phone the last frim. jb
in the last step i put out the cable from my phone
Now with my phone not open




(Do NOT unplug the usb cable before ODIN finishes its job.


If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
Then you can remove the usb cable.)



what do I do now?
Click to expand...
Click to collapse

If you have I9070 and you flashed I9070P firmware (or you have I9070P and you flashed I9070 firmware) you probably hardbricked it...
 
thmls

thmls

Senior Member
Sep 29, 2012
221
25
athens
No

---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------
shut_down said:
First this tgread is about rooting GB. Continue in q&a thread.

Can you go to download mod? Reflash other firmware.

Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I can't go to download mod

---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
shut_down said:
First this tgread is about rooting GB. Continue in q&a thread.

Can you go to download mod? Reflash other firmware.

Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I can't go to download mod
 
Last edited:
shut_down

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
thmls said:
No

---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------


I can't go to download mod

---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------


I can't go to download mod
Click to expand...
Click to collapse

Take it to the service center.

Before that, try to pull out the battery, put back in and again try to go to download mode.

You can try with USB JIG too.
 
  • Like
Reactions: thmls
knurd

knurd

Member
Dec 10, 2012
40
3
REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?
 
Z

Zefti

New member
Jan 26, 2012
1
0
GT-i9070P root

Hello. I need files to root: S advance GT-i9070P

Sieć: T-Mobile Poland
Numer modelu: GT-I9070P
Wersja systemu androdi: 2.3.6
Wersja modemu: I9070PXXLK4
Numer wersji: GINGERBREAD.BOLK1
 
DaksAnkit

DaksAnkit

Senior Member
Mar 23, 2015
408
152
City with Horns
Zefti said:
Hello. I need files to root: S advance GT-i9070P

Sieć: T-Mobile Poland
Numer modelu: GT-I9070P
Wersja systemu androdi: 2.3.6
Wersja modemu: I9070PXXLK4
Numer wersji: GINGERBREAD.BOLK1
Click to expand...
Click to collapse
try this
Check the permissions in developer options ON
1 : allow android debug mode,
2: allow mock locations .
3: Download temporary cwm and copy it to sd card
4: REBOOT RECOVERY.by holding volume up +power button
5:select update.zip(CWM) from sd card and select the zip file you copied in sd card

download CWM temporary recovery from this thread

1: http://xdaforums.com/showthread.php?p=66557694#post66557694

after that flash the root file which you can download from this 2nd link aso read the instructions carefully .
[ DO NOT BLAME ME IF YOU BRICK YOUR PHONE SO BE VERY CAUTIOUS]

2:http://xdaforums.com/showthread.php?t=2087424
 
Last edited:
L

llaine

New member
Nov 9, 2016
3
0
Bitshare broken

Hi, I never managed to download the .rar from Bitshare, looks like it's broken.
After the 1 minute waiting, I get redirected to the home page.

Any other solutions?
 
You must log in or register to reply here.

Similar threads

qzem
  • Locked
[HOW TO] Samsung Galaxy S I9070 Advance ROOT for most firmwares!
Replies
806
Views
703K
Jonny
Jonny
qzem
[For DEV] Samsung Galaxy S I9070 Advance kernel & platform source code
Replies
1K
Views
367K
shut_down
shut_down
arkhan11
  • Locked
[INDEX][upd OCT 7, 2013]Galaxy S Advance i9070 / i9070P
Replies
357
Views
369K
Jonny
Jonny
D
[GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance
Replies
294
Views
269K
J
jfjkeuren
V
  • Sticky
[LIST]All Stock Frimwares - Galaxy S Advance
Replies
169
Views
218K
Toan-5
Toan-5

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 87
    D
    diego-ch
    DISCLAIMER:


    I'm NOT responsible for any damage you cause to your phone.
    Be sure to follow the steps correctly.    ​



    REQUIREMENTS:
    • Windows

    • Samsung KIES and all drivers installed.

    • ODIN for flashing the firmware.



    HOW TO ROOT:
    1. Download the Pre-Rooted firmware that matches the firmware your using.


    2. Extract the RAR file, you will end up with a folder with two files in it.
      SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


    3. Close any KIES application that might be open.


    4. Open ODIN.


    5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


    6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


    7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
      Do NOT select "Repartition"


    8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


    9. Plug your phone usb cable to your computer.
      If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


    10. Click the "START" button and wait for it to finish.
      Do NOT unplug the usb cable before ODIN finishes its job.


      If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
      Then you can remove the usb cable.
      Your device will reboot in Recovery Mode and will finish the installation.
      When it finishes, it will reboot and start the Android System.



    11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





    That's it! :good:
    Now, enjoy your rooted Galaxy S Advance! :cool:
    You can go back to Download Mode to check that your Binary Counter hasn't increased.



    DONATIONS:
    Consider making a donation,
    It helps support developers so they can keep doing a great job!
    Donate via Paypal :good:
    View
    38
    D
    diego-ch
    GT-I9070 Rooted Firmwares:


    REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
    DOWNLOAD

    REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
    DOWNLOAD

    REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
    DOWNLOAD

    REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
    DOWNLOAD

    REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
    DOWNLOAD

    REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
    DOWNLOAD

    REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
    DOWNLOAD

    REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
    DOWNLOAD

    REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
    DOWNLOAD

    REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
    DOWNLOAD

    REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
    DOWNLOAD

    REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
    DOWNLOAD

    REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
    DOWNLOAD

    REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
    DOWNLOAD

    REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
    DOWNLOAD

    REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
    DOWNLOAD

    REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
    DOWNLOAD

    REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
    DOWNLOAD

    REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
    DOWNLOAD

    REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
    DOWNLOAD

    REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
    DOWNLOAD










    Requests Suspended till JB ROM is released!

    root your phone before making the ota update and the root will remain.

    do not use kies to update the phone.
    View
    17
    D
    diego-ch
    GT-I9070P (NFC Version) Rooted Firmwares:



    REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
    DOWNLOAD

    REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
    DOWNLOAD

    REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
    DOWNLOAD

    REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
    DOWNLOAD

    REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
    DOWNLOAD

    REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
    DOWNLOAD

    REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
    DOWNLOAD


    View
    8
    D
    diego-ch
    I did root more firmwares,
    I just need some time to upload them.
    I'll upload them tonight.
    View
    7
    D
    diego-ch
    okay guys,
    now I have 10 requests for the I9070 and 7 for the I9070P (that's around 5gb for me to download and then upload)
    but I'll start uploading them today

    Code: 
    I9070
1.  XSE DXLD1 LBLD1
2.  EUR XXLD3
3.  CNX XXLF4 CNXLC1
4.  CHO UBLD1 CHOLD4
5.  XTC DXLD1 OLBLD1
6.  TRA XXLD3
7.  XME DXLD1 OLBLD1
8.  INU DDLJ1 ODDLJ1
9.  PRT XXLF4 PRTLF1
10. TCE UBLD1

+ 7 more I9070P firmwares

    please wait for me to upload these before making more requests



    ferrettijr said:
    Alright. Thanks so much.

    Certo, muito obrigado.:laugh:
    Click to expand...
    Click to collapse

    CHO reuploaded. please test the new link.
    View

New posts