[ROM][KitKat][4.4.2][Unofficial]BeanStalk Build 4.4.285 NEW_FORMAT- 4.4.2 [Jewel]

Search This thread

GoblinZ

Senior Member
Sep 15, 2010
180
365
Beanstalk-Presentation.png

I DID NOT MAKE THIS ROM! I just compiled it from the beanstalk and CM sources

Bugs.png

-Data is having trouble keeping a connection after some time (present in 275. build 270 still ok)
-ALL CM bugs will be present. This build uses the CM jewel device tree and kernel.

Gapps.png


http://xdaforums.com/showthread.php?t=2397942

Download.png


http://d-h.st/bTn

BeanStalk Build 4.4.249_OLD_FORMAT
http://d-h.st/bTn
-Updated CM/Beanstalk sources to 2/18/14.

THE FOLLOWING BUILD IS FOR THOSE WHO UPGRADED TO THE NEW HBOOT 2.10 SENSE 5 ROM...IF YOU ARE ON HBOOT 2.09 THIS IS NOT THE BUILD FOR YOU!!!
YOU MUST PERFORM THE ENTIRE UPGRADE PROCESS INCLUDING BOOTING THE ROM HERE

DISCLAIMERS:

  • Instructions for installation:
    1. Download firmware file, and install via HBOOT or fastboot. This will update your HBOOT (2.10) your radio (1.13.11.1105), and some other important firmware bits. Make sure you remove or rename any PJ75IMG files from your external SD card after this step.
    2. Download recovery file (TWRP 2.6.3.1b) and flash via fastboot. This version of TWRP has been modified to accommodate the updated partition layout for this update.
    3. Download ROM (either version), and flash via TWRP. If the TWRP gives an error and reboots, hold the volume down button to get back to the bootloader, boot back into recovery, and flash again. It *should* flash fine on the second attempt.


  • Once you have booted into the Sense 5 rom successfuly you may proceed in flashing the NEW_FORMAT version of this rom after a full wipe in the new recovery.


    BeanStalk Build 4.4.285_NEW_FORMAT

    http://d-h.st/gtg

    -updated sources to 4.4.285 from beanstalk


    BeanStalk Build 4.4.270_NEW_FORMAT

    http://d-h.st/9sI

    -updated sources to 4.4.270 from beanstalk

    Installation.png


    1. Download the latest build
    2. Download the latest Slim GAPPS or other 4.4 specific gapps
    3. In recovery, full wipe, and manually format /system
    4. Flash ROM and the gapps you want, reboot

    Source.png


    SlimROM source can be found HERE
    BeanStalk source can be found HERE
    CM sources HERE

    For Changelog/Features

    http://www.scotthartbti.com/index.php/beanstalkbuilds/

    Thanks:
    deck's tireless work made the CM kernel and device tree that this and many other roms for this device are based on.
    scotthartbti for posting creation, updates, and keeping github up to date.
    insaneo1488, tearaz, Haus_, shortyishere, NaterTots, CaptainThrowback, and everyone in the #htc-dev channel for all of their support and info along the way.
    Please dont hesitate to let me know if someone was missed here, send a PM or catch me in freenode and ill get you in there
 
Last edited:

GoblinZ

Senior Member
Sep 15, 2010
180
365
Figured out xposed location.... but can't get DPI to change.

Also, for Pie control, not seeing how to change background on lock screen.

So I pulled the feature list directly from the lead developer's thread with the assumption that he had kept up the feature list...appears he doesnt keep his thread up.

http://xdaforums.com/showthread.php?t=2091900

So I will edit out all the features from the OP and instead just put a link to the kitkat changelog. :)
 
  • Like
Reactions: scottspa74

GoblinZ

Senior Member
Sep 15, 2010
180
365
Copy that, but I don't see why DPI settings aren't working. Xposed is there, as well as app settings, so it should work.
I installed and enabled, then rebooted.

I'll keep trying.

open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot
 

mcwups1

Senior Member
May 4, 2011
2,486
483
Google Pixel 6 Pro
Google Pixel 7 Pro
open xposed back up on the top where it says "Framework" change to "Modules" put a check in the app settings module...reboot

I did that. I've used Xposed in almost every ROM I've installed. I'm familiar with it.

Attached pictures, and I've granted SU permissions and rebooted twice.
 

Attachments

  • uploadfromtaptalk1391651875202.jpg
    uploadfromtaptalk1391651875202.jpg
    54.4 KB · Views: 391
  • uploadfromtaptalk1391651883987.jpg
    uploadfromtaptalk1391651883987.jpg
    42.1 KB · Views: 387
  • uploadfromtaptalk1391651891657.jpg
    uploadfromtaptalk1391651891657.jpg
    57.9 KB · Views: 386

thewind730

Senior Member
Feb 2, 2012
704
307
So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas

Sent from my EVO using Tapatalk
 

GoblinZ

Senior Member
Sep 15, 2010
180
365
So right after I say message app is awesome it's force closing when I attach and try to send a picture. Any ideas

Sent from my EVO using Tapatalk

I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.

Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well

http://xdaforums.com/showpost.php?p=50141180&postcount=1184

So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.
 
Last edited:

InSaNeO1488

Senior Member
Jul 17, 2012
216
42
Ok cool cause I was having the same issues with decks irc build with the messaging app ill try this out once you get it fixed

Sent from my EVO using XDA Premium 4 mobile app
 

thewind730

Senior Member
Feb 2, 2012
704
307
I flashed the Full Modular GAPPS from the 0-day PA so my messaging app didnt look any different. I was able to attach a picture and send without issue.

Edit: so, I wiped flashed Just this rom and the PA Gapps, and sure enough force close...google is clearly forcing us to use hangouts...but in all seriousness it seems to be affecting CM nightly as well

http://xdaforums.com/showpost.php?p=50141180&postcount=1184

So, I will recompile and post to OP as soon as CM has the code cleaned up with a fresh build. Sorry for the trouble.

Thanks man! For looking into this and bringing these builds back your time is greatly appreciated

Sent from my EVO using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    Beanstalk-Presentation.png

    I DID NOT MAKE THIS ROM! I just compiled it from the beanstalk and CM sources

    Bugs.png

    -Data is having trouble keeping a connection after some time (present in 275. build 270 still ok)
    -ALL CM bugs will be present. This build uses the CM jewel device tree and kernel.

    Gapps.png


    http://xdaforums.com/showthread.php?t=2397942

    Download.png


    http://d-h.st/bTn

    BeanStalk Build 4.4.249_OLD_FORMAT
    http://d-h.st/bTn
    -Updated CM/Beanstalk sources to 2/18/14.

    THE FOLLOWING BUILD IS FOR THOSE WHO UPGRADED TO THE NEW HBOOT 2.10 SENSE 5 ROM...IF YOU ARE ON HBOOT 2.09 THIS IS NOT THE BUILD FOR YOU!!!
    YOU MUST PERFORM THE ENTIRE UPGRADE PROCESS INCLUDING BOOTING THE ROM HERE

    DISCLAIMERS:

    • Instructions for installation:
      1. Download firmware file, and install via HBOOT or fastboot. This will update your HBOOT (2.10) your radio (1.13.11.1105), and some other important firmware bits. Make sure you remove or rename any PJ75IMG files from your external SD card after this step.
      2. Download recovery file (TWRP 2.6.3.1b) and flash via fastboot. This version of TWRP has been modified to accommodate the updated partition layout for this update.
      3. Download ROM (either version), and flash via TWRP. If the TWRP gives an error and reboots, hold the volume down button to get back to the bootloader, boot back into recovery, and flash again. It *should* flash fine on the second attempt.


    • Once you have booted into the Sense 5 rom successfuly you may proceed in flashing the NEW_FORMAT version of this rom after a full wipe in the new recovery.


      BeanStalk Build 4.4.285_NEW_FORMAT

      http://d-h.st/gtg

      -updated sources to 4.4.285 from beanstalk


      BeanStalk Build 4.4.270_NEW_FORMAT

      http://d-h.st/9sI

      -updated sources to 4.4.270 from beanstalk

      Installation.png


      1. Download the latest build
      2. Download the latest Slim GAPPS or other 4.4 specific gapps
      3. In recovery, full wipe, and manually format /system
      4. Flash ROM and the gapps you want, reboot

      Source.png


      SlimROM source can be found HERE
      BeanStalk source can be found HERE
      CM sources HERE

      For Changelog/Features

      http://www.scotthartbti.com/index.php/beanstalkbuilds/

      Thanks:
      deck's tireless work made the CM kernel and device tree that this and many other roms for this device are based on.
      scotthartbti for posting creation, updates, and keeping github up to date.
      insaneo1488, tearaz, Haus_, shortyishere, NaterTots, CaptainThrowback, and everyone in the #htc-dev channel for all of their support and info along the way.
      Please dont hesitate to let me know if someone was missed here, send a PM or catch me in freenode and ill get you in there
    9
    No more pirate builds


    BeanStalk Build 4.4.251_NEW_FORMAT

    http://d-h.st/aR8

    -no more roaming R symbol. Thanks to Captain Throwback and Haus_ for discovering the patch!
    -PLEASE NOTE THIS BUILD IS FOR THE NEW PARTITION LAYOUT (HBOOT 2.10) ONLY!
    8
    New Partition Layout version PLEASE READ THE ENTIRE POST!!!

    YOU MUST FLASH AND RUN CAPTAINTHROWBACK'S SENSE 5 4.3 UPDATE ROM BEFORE FLASHING THIS

    REQUIREMENTS:
    -HBOOT 2.10
    -RECOVERY WITH NEW PARTITION LAYOUT
    -FLASH AND BOOT INTO THE SENSE 5 4.3 ROM FIRST OR THIS WILL NOT WORK!

    see captain throwback's instructions here


    DOWNLOAD:

    I have to say it again DO NOT FLASH THIS UNLESS YOU HAVE PERFORMED THE UPGRADE TO THE LATEST SENSE 5 4.3 upgrade! You must actually flash the rom not just the recovery. You have been warned.

    http://d-h.st/pgW

    What I plan to do going forward is offer two versions, the standard version and the new version. There will be no functionality differences between the two asside from the partition layout.
    7
    Update 3-30-2014 4.4.275

    Update to BS Sources 4.4.275

    http://d-h.st/kBQ

    also updated CM sources to 3/30/2014.

    The changelog has not been updated on the main webpage.
    7
    4.4.270

    http://d-h.st/9sI

    -updated BS Sources to 4.4.270