FORUMS
Remove All Ads from XDA

[TUT][Complete] How to flash stock (.Kdz) firmwares on LG p970 [Beginers]

272 posts
Thanks Meter: 214
 
By s.bluedreams, Senior Member on 29th July 2013, 07:48 AM
Post Reply Email Thread
10th October 2013, 09:03 AM |#11  
Junior Member
Thanks Meter: 0
 
More
Thumbs up minor issue
1. I encountered a minor issue: 1st time I tried to flash, the windows cab expansion utility crashed. I moved the kdz and the extract tool into a folder on desktop and restarted and 2nd time went all ok. maybe it`s something with permissions on my system or a bug in windows cab utility.
2. After flashing all OK and phone rebooting, it takes 10-15 min for the phone to start (just this first time). Don`t do anything, just be patient and wait!

I posted this just for your information, if someone encounters the same problem.

---------- Post added at 11:03 AM ---------- Previous post was at 10:58 AM ----------

Quote:
Originally Posted by baddiva

why is it on the development section?

Sent from my LG-P970 using Xparent Green Tapatalk 2

I think just because it`s not recommended for beginners to start experiencing flashing their phones That way, you have to look "deeper" and have to read and learn some more stuff before pressing START
 
 
11th November 2013, 07:08 PM |#12  
Junior Member
Thanks Meter: 0
 
More
HEEEELP
- Note: in last step you cant add CWM to your kernel , Type "N" and enter , adding CWM may cause of bricking Your device [Tnx diazao]!]

ok i just bricked one because it haved CWM preinstalled. What can I do?
17th January 2014, 10:17 AM |#13  
Member
Flag Arlon
Thanks Meter: 8
 
More
Exclamation cannot download stock rom
Hi,

I get this error when trying to download a stock firmware from this page: http://www.lg-phones.org/official-st...mware-rom.html

Quote:

Access Denied
You don't have permission to access "http://csmgdl.lgmobile.com/swdata/WDLSW/LGP970/ANEUTL/V10e_00/V10E_00.kdz" on this server.

Reference #18.245e0e17.1389953433.a2dc5e

Is there an alternative page?
I'm interrested in the V10e (EUROPE OPEN) stock rom.

Thanks
Philippe
16th February 2014, 06:58 PM |#14  
s.bluedreams's Avatar
OP Senior Member
Flag Tehran
Thanks Meter: 214
 
More
Quote:
Originally Posted by filzip

Hi,

I get this error when trying to download a stock firmware from this page: http://www.lg-phones.org/official-st...mware-rom.html



Is there an alternative page?
I'm interrested in the V10e (EUROPE OPEN) stock rom.

Thanks
Philippe

Sorry i dont have this files on my Lap and i cant upload it for you just search on net ...
3rd March 2014, 06:04 AM |#15  
Junior Member
Thanks Meter: 1
 
More
Thumbs up This tutorial still works!
I would like to thank the author,

I followed steps describe here and its working flawlessly. Well done.!

Anyway, I tried the Stock Rom link you provided and they all show access denied, but I search and get the V30B from this link.
" h t t p : / / d - h . s t / z k U " (please remove "white space" then you get the correct link). Also in my case, first attemp to connect phone with SmartFlasher Tool didn't show COM PORT , but after (did exactly what suggest by the author) remove battery - then try again, it show COM PORT as expected. Press start -> wait 4:20 minutes and my phone start rebooting. After 2 more minutes all works well. Sim OK, Signal OK, WIFI work, every thing looks perfect.!

Thanks again.
The Following User Says Thank You to shinnapong For This Useful Post: [ View ] Gift shinnapong Ad-Free
19th April 2014, 08:38 AM |#16  
Junior Member
Thanks Meter: 0
 
More
Bro the links for rom you posted are not working please post working links..........!
28th May 2014, 01:37 PM |#17  
Junior Member
Hong Kong
Thanks Meter: 0
 
More
Quote:
Originally Posted by s.bluedreams

Hi LG p970 Users

Here is the Lasest method of flashing .Kdz stock firmwares on your LG P970 !

Step by Step!

Do all Steps and make Sure attent to them!

Let Start

1 - if your phone has less than 30% charge take it to charge till it have More than 30%

2 - Download your phone drivers from Here and install them

3 - Download your desired Stock Firmware from Here

4 - Download This Tool for Converting .Kdz firmwares to .fls & .bin : Download

5 - Place The .Kdz Firmware and Convert tool in a same folder

6 - Run the convertor tool and type "1" and press enter to start converting!
- Note : Converting by this tool have more than 1 Step ! let it to do all of them , Dont CLOSE it before than you see all of this stepe in this picture on your screen !
- Note: in last step you cant add CWM to your kernel , Type "N" and enter , adding CWM may cause of bricking Your device [Tnx diazao]!
- After Complete Converting You have 2 Files ( .bin and . fls)




7 - Download Smart Flash Tool from Here (password : bluedreams) and extract it to any where you want!

8 - This is IMPORTANT step

8,1 - Turn off Phone
8,2 - Make Sure Battery inserted
8,3 - Make Sure Simcard inserted
8,4 - Sd card is not important
8,5 - Hold Vol+ key
8,6 - Plug the USB cable while you are Holding Vol+ key
8,7 - See the " S/W Upgrade " on your phone screen

9 - Run the B_SmartFlashTool_Extern.exe with administrator rights ( Right click on it and then Run as administrator )

10 - Go to 2nd panel ( ROM copy D/L )

11 - In " Destination Binary File " section :
11,1 - Select .fls file in 1st line!
11,2 - Select .bin file in 2nd line!

12 - In " Select mode " section choose Normall mode

13 - In " Communication Setup " section :

13,1 - If your phone drivers installed correst you can see Com port and Comminucation driver if not those are empty !
13,2 - if you install the drivers in step 2 and it doesnt help
13,3 - connect your intrnet and unplog the phone and eject battery to turning off phone and then insert battery and do step 8
13,4 - and wait for installing drivers from internet
13,5 - check line 13,1

14 - When you saw Com port and Comminucation driver , can press Start for flashing !

15 - Wait for flashing done , when flashing done phone will restart automaticly !

16 - NOTE : Dont unplog USB cable or turn off your phone or PC or any other work that dissconnects phone from PC untill flashing Done !

17 - This is Very Important Step , Press Thanks if i helped you

This is great! It works!
For those who are looking for stock ROM, you can access here where it was found in other thread from XDA
15th June 2014, 09:45 AM |#18  
gothed's Avatar
Senior Member
Yogyakarta
Thanks Meter: 96
 
More
i have followed all steps, and flashing done correctly, but why my phone stuck on LG logo? any idea how to solve this? thanks
18th July 2014, 01:07 AM |#19  
Junior Member
Thanks Meter: 0
 
More
!!!
as when as go to the startin flashin give eror that is stoped
and when i run flashtool it say that cant find model.dll
what can i do?
23rd July 2014, 07:43 PM |#20  
Member
Flag Mumbai
Thanks Meter: 2
 
More
Flash it againn
Quote:
Originally Posted by kamiar1370

as when as go to the startin flashin give eror that is stoped
and when i run flashtool it say that cant find model.dll
what can i do?

Flash it again and be careful to select proper files
4th September 2014, 09:35 PM |#21  
afraaa's Avatar
Senior Member
Flag Isfahan
Thanks Meter: 192
 
More
can we use new KDZ_FW_UPD.exe new lg kdz flash tools for lg optimus black ? if anyone know , im waiting . i know we can use old meths and its work but i want to know if can make it easier for girls
Post Reply Subscribe to Thread

Tags
firmware, flash, lg p970, optimus black, smartflash tool

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes