[MOD] [Wind & T] Mobile & Bullet Proof tweaked build.prop

morrislee · Apr 4, 2012

WIND WIND.zip for 1.46.1500.3 (WIND users only!)
T-Mobile TMOB.zip for 1.43.531.3 (T-Mobile users only!)
Bullet Proof BP.zip for Bullet Proof ROM

FAQ:
------------------------------------------------------------
Can I flash this via recovery? No, extract the build.prop and push it to system and set to 644
Why do I see no data speed increase? This only unlocks the full HSPA+ performances on the phone, actual speed is still limited to the provider's cellphone tower types

To use this, rename your current build.prop and past the one in the zip to system, change the permissions to 644 and reboot.

Change log: 04/14/2012:

removed hep option (I think this is killing battery, not sure)
added modified Bullet Proof version of build.prop, should be ok for the mail problem

Change log: 04/05/2012:

added T-Mobile version
re-enabled ro.ril.disable.power.collapse
removed the default home operator stuff (did not make a difference)
ro.telephony.default_network set to 2 so the network type setting sticks (only on wind version)
added ro.ril.hep = 1
added ro.kernel.android.checkjni=0
added pm.sleep_mode=1
added windowsmgr.max_events_per_sec=150
added video.accelerate.hw=1
added debug.performance.tuning=1

Change log: 04/03/2012:

Added to default to home operator "WIND Home" and the numeric IDs for gsm and cdma configs
WiFi Scan interval to 300s (save battery)
heapsize to 128MB
debug.composition.type from c2d to gpu (home screen seems to be much smoother)
Tweaked the HSPA configs (I can't see much change, probably because I am far in the boonies)
Enabled "Dual Transfer Mode"
Enabled ro.ril.enable.sdr (unsure what it is, but just testing it)

morrislee · Apr 4, 2012

Post your test results, recommendations etc.

glacierguy · Apr 4, 2012

Can you tweak the tmobile one also?

Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed

)... I will have to doube check.

Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?

Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5

morrislee · Apr 4, 2012

glacierguy said:
Can you tweak the tmobile one also?

Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed )... I will have to doube check.

Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?

Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5

I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc

Can someone provide a completely unmodified build.prop?

glacierguy · Apr 4, 2012

Mine is stock... I verified with the modified build prop faster speeds thread...

http://db.tt/MlsimcFo

Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM

Thanks

PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.

http://xdaforums.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]

Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5

morrislee · Apr 4, 2012

glacierguy said:
Mine is stock... I verified with the modified build prop faster speeds thread...

http://db.tt/MlsimcFo

Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM

Thanks

PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.

http://xdaforums.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]

Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5

Yours is definitely modified, I see that it has custom names in the namespaces at the bottom.

I did put those values in the build prop, but I dont see much changes on my side. then again, it is probably my provider or my location

rbaruch · Apr 4, 2012

How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.

Sent from my HTC Amaze 4G using xda premium

morrislee · Apr 4, 2012

rbaruch said:
How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.

Sent from my HTC Amaze 4G using xda premium

This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"

yo2boy · Apr 5, 2012

morrislee said:
This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"

Same here. No change in data speeds at all :|

krook6023 · Apr 5, 2012

morrislee said:
I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc

Can someone provide a completely unmodified build.prop?

Stock TMOUS build.prop from 1.43.531.3 OTA...

Code:

ro.ril.oem.ecclist=911
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=1
ro.ril.fast.dormancy.timeout=10
ro.ril.def.agps.feature=1
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.enable.gea3=0
ro.ril.enable.amr.wideband=0
ro.ril.set.mtusize=1440
ro.ril.rxd.mode.nv=11
ro.ril.bler.threshold.nv=125
ro.ril.rscp.threshold.nv=110
ro.ril.enable.rxd=1
ro.ril.oem.cnap=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.ril.ims=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.vs=android-hms-tmobile-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.ril.vmail.310260=+18056377243
ro.phone.min_match=7
ro.ril.enable.ganlite=0
ro.product.model=HTC_Amaze_4G
ro.ril.def.agps.feature=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ22
ro.build.display.id=GRJ22
ro.build.version.incremental=192596.3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=四 12月  1 02:56:31 CST 2011
ro.build.date.utc=1322679391
ro.build.type=user
ro.build.user=root
ro.build.host=ABM035
ro.build.tags=release-keys
ro.product.model=HTC Ruby
ro.product.brand=tmous
ro.product.name=htc_ruby
ro.product.device=ruby
ro.product.board=ruby
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ruby
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.changelist=192596
ro.product.ua=
ro.build.fingerprint=tmous/htc_ruby/ruby:2.3.4/GRJ22/192596.3:user/release-keys
ro.build.project=Ruby:228638
ro.product.version=1.43.531.3
ro.build.languageremove=0
ro.build.sense.version=3.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for ruby
#

ro.sf.lcd_density=240

debug.fb.rgb565 = 0
debug.composition.type = c2d

#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1

#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100

#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=11

#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
#-HTC_RIL: from QCT Fusion
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000

# pyramid RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3

# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0

wifi.interface=tiwlan0
wifi.supplicant_scan_interval=15

# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072

# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m

# For the default value of agps
ro.ril.def.agps.mode = 2

# For HSDPA low throughput
ro.ril.disable.power.collapse = 1

# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1

# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1

# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg

# Release Bluetooth HW/SW information
ro.bt.chipset	= Broadcom BCM4329-B1
ro.bt.stack	= Broadcom BTL-A
ro.bt.stack.version	= 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles	= 4270339

# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1

# For quick boot mode
persist.sys.shutdown.mode = hibernate

# For opensense sdk
ro.htc.common.version = 2.0.0.0

# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch qHD resolution
ro.product.main_camera = 8M
ro.product.front_camera = 2M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n

# Properties for supporting framework features
ro.htc.framework.screencapture = true

# support sdcard2
ro.sdcard2 = 1

# Extend key dispatching timeout
keydispatchtimeout = 15000

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

morrislee · Apr 6, 2012

New version is up and t-mobile one added. Always backup your current one just in case!

rbaruch · Apr 6, 2012

yo2boy said:
Same here. No change in data speeds at all :|

Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.

morrislee · Apr 6, 2012

rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.

Do you see improvement before and after applying my build.prop in your downtown area? Or has it always been that way?

blast0id · Apr 6, 2012

will the t-mobile one work for simple mobile?

---------- Post added at 10:50 PM ---------- Previous post was at 10:48 PM ----------

morrislee said:
And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc

I apologize for thread jacking with this question, but what would you put in this file, I am asking here, rather than via PM because I think others might like to know... you could make a new thread if you prefer... thanks!

edit: ok did a little digging, would this work?

Code:

mount -o rw,remount /dev/block/mmcblk0p29 /system 
chmod 777 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness 
echo 0 > /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness 
chmod 444 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness 
mount -o ro,remount /dev/block/mmcblk0p29 /system

edit2: confirmed, the above works, just edited the file (init.post_boot.sh) and adb pushed it, then rebooted... nice, no more bleed!

adslee · Apr 6, 2012

rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.

Reception's always been better downtown, probably more/better towers or something

mapleleafs89 · Apr 8, 2012

adslee said:
Reception's always been better downtown, probably more/better towers or something

Thanks I will try this out.

And for you Wind users, I am on the Energy ROM and I can't send MMS for some reason, keeps failing. Although the other day I did receive one from another Wind user, but missed them from Rogers customers.. My APN for MMS matches exactly what its supposed to be.

blast0id · Apr 8, 2012

benjamminzIS said:
will the t-mobile one work for simple mobile?

I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?

mrmako777 · Apr 8, 2012

benjamminzIS said:
I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?

It should, simple mobile runs on tmobiles network

djdanska · Apr 9, 2012

The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.

morrislee · Apr 9, 2012

djdanska said:
The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.

Nice speeds, but usually they are depended on traffic. Don't get your hopes up!

[MOD] [Wind & T] Mobile & Bullet Proof tweaked build.prop

Senior Member

Attachments

Senior Member

glacierguy

Guest

Attachments

Senior Member

glacierguy

Guest

Senior Member

Senior Member

Senior Member

Senior Member

Retired Forum Moderator

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts