[ROM] MiniCM7-2.2.2 [6/7/13]Gingerbread 2.3.7/CM7.2 unofficial port for the pro

Search This thread

SmG67

Senior Member
May 2, 2012
2,128
849

SmG67

Senior Member
May 2, 2012
2,128
849
But is it better from the stable version?

It contains bug-fixes, but the nightlies are not tested, you are the tester.
It may be that a fix for something breaks something else, or the included fix is a bit worse than the problem it was supposed to fix, but most of the time, the nightlies run at least as well, if not better than the last stable version.

I doubt you'll notice much of the under-the-hood work that has gone into the nightlies, but I guess fixed code is usually better than the older code.

But, as always, use at your own risk, make a backup so you can go back if things don't work out for you.
 

isko95

Senior Member
May 6, 2012
1,165
241
Lombardy
It contains bug-fixes, but the nightlies are not tested, you are the tester.
It may be that a fix for something breaks something else, or the included fix is a bit worse than the problem it was supposed to fix, but most of the time, the nightlies run at least as well, if not better than the last stable version.

I doubt you'll notice much of the under-the-hood work that has gone into the nightlies, but I guess fixed code is usually better than the older code.

But, as always, use at your own risk, make a backup so you can go back if things don't work out for you.
But the latest one which nAa ha s uploaded i think is stable (minicm7 unofficial), or not?
 

SmG67

Senior Member
May 2, 2012
2,128
849
But the latest one which nAa ha s uploaded i think is stable (minicm7 unofficial), or not?

Probably yes, but it only gets labeled 'Stable' if it is tested and working to a high standard. Since the nightlies are not tested, they don't get that label, although they may work better than the last 'Stable' version. You'll have to try for yourself.
 

Trichelieu

Senior Member
May 8, 2012
131
28
31
It's not written nightly on the latest one. I think it's like a beta for a futur new stable version of mini CM7.
 

Trichelieu

Senior Member
May 8, 2012
131
28
31
Oh ok, I got where we don't understand each other.
Nothing really is new in mini CM7 since latest stable build imo. I'm waiting for a new version of miniCM7 fully compatible with naa JB 05. Other changes brought by nightlies are minor. Using new kernel, this could be huge.
 

isko95

Senior Member
May 6, 2012
1,165
241
Lombardy
Oh ok, I got where we don't understand each other.
Nothing really is new in mini CM7 since latest stable build imo. I'm waiting for a new version of miniCM7 fully compatible with naa JB 05. Other changes brought by nightlies are minor. Using new kernel, this could be huge.
If you meant that, i also agree...because me also want minicm7 on naa jb kernel! :D
 

A z a z e l

Member
Feb 28, 2011
16
0
Hi guys, just managed to get this one working.

1 problem, when I connect internet via tethering to my PC, it drops out when the screen goes into timeout. I assume it's a power saving option but I can't find it anywhere, any ideas?
 

A z a z e l

Member
Feb 28, 2011
16
0
Go to Wi-Fi Settings->Menu->Advanced->"Wi-Fi activate something in hibernate..."

Thanks! Couldn't find it anywhere - "Wi-Fi sleep policy"

Another little thing I've noticed since installing, sometimes the 'Launcher Actions' icon disappears from the shortcuts at the bottom. It's usually 'Call', 'Launcher', 'Browser'. Sometimes the other 2 disappear when I add it back there. Odd.
 
Last edited:

agentsandy007

Account currently disabled
Re: [ROM] MiniCM7-2.2.1 [10/6/12]Gingerbread 2.3.7/CM7.2 unofficial port for the pro

Hey guyz. Does anybody know about this?

Go to Settings - About phone - keep hittin Android Version , and this pops out...

For some reason couldn't upload screenshot....sorry
Sent from my U20i using xda premium
 
Last edited:

Heronger

Senior Member
Apr 3, 2012
371
402
Straelen
AW: [ROM] MiniCM7-2.2.1 [10/6/12]Gingerbread 2.3.7/CM7.2 unofficial port for the pro

Yep. A pic of a GB zombie.

Sent from my Galaxy Nexus using xda premium
 

Trichelieu

Senior Member
May 8, 2012
131
28
31
Hey guyz. Does anybody know about this?

Go to Settings - About phone - keep hittin Android Version , and this pops out...

For some reason couldn't upload screenshot....sorry
Sent from my U20i using xda premium

Yep.

On newer versions you can pinch zoom to get flying beans/CM dudes everywhere depending on what you are hitting x). (Android version or CM version)
 
No. Its ,,Sorry Ericsson'' :D

Wysyłane z mojego U20i za pomocą Tapatalk 2

Yeahh.. LOL

In some ROM it's the Zombie in some it's Sorry Ericsson :laugh:

zombie_zpsab714828.png
sorry_zpse6e9405d.png


There is also a 3rd one. I don't remember how to bring it up, but here it is (taken from decompiled framework-res.apk of MiniCM7-2.2.1)

tdyacht_zps0f724afa.jpg
 

Top Liked Posts

  • There are no posts matching your filters.
  • 282
    PresentationSmall.jpg


    Visit Project's page @ google code

    MiniCM7 is part of the FreeXperia project

    Sources are at my Github: MiniCM nobodyAtall

    This ROM is for the X10mini pro
    If you have and X10mini, go here -> http://xdaforums.com/showthread.php?t=1068553
    If you have an X8, go here -> http://xdaforums.com/showthread.php?t=1362585

    MiniCM7 is custom-built, based on CyanogenMod 7, running Android Gingerbread on top of the nAa kernel.


    Notes:
    • The MiniCM7 and OrangeHaze themes are is made exclusively for the MiniCM7 ROMs. They are not to be used with other ROMs, so DON'T rip them
    • To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first.
    • To everyone: Please don't mirror this ROM
    • MiniCM7 is built for X10mini. It is a stable and the most feature-complete Gingerbread ROM perfect for day to day use
    • This is a team work by DaRk_dOg and me
    • For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting



    FAQs (Many thanks to matmutant)

    If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
    searchi.jpg





    If you want a more relaxed chat, or have issues with MiniCM, you can use the following chat server
    (Thanks to SafiXS for setting this up!)
    MiniCM chat



    Before posting an issue wipe (factory reset) via CWM at least once.


    Working:
    • Everything


    Features:
    • Built for LDPI
    • MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    • App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
    • Gingerbread's native App2sd (storing to fat)
    • In kernel ClockworkMod recovery v5.0.2.7 and option to reboot into Recovery
    • Modular Undervolting and Overclocking handled CM Settings menu (by default none is active)
    • Extra CM Performance Settings menu for SD Read Cache Speed
    • Extra CM Settings display menu for Ultra brightness
    • Smooth 2D scrolling in menus
    • Dual touch in kernel
    • Mddi lag fix in kernel
    • Native Wifi Hotspot
    • Native USB tethering
    • Flashlight toggle from lockscreen
    • Most of the core components are built from sources


    Bugs: (Please use the project's tracker for reporting bugs. Please file them properly following the template or they will be discarded.)


    Requirements:


    • Instructions:
      • Download the MiniCM7-xxx.zip from the release link that follows
      • Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
      • Move the MiniCM7-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM7 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
      • Unlock your bootloader, if you haven't already. Check http://xdaforums.com/showthread.php?t=1254225 for a nice tutorial
      • Flash the nAa kernel using Flashtool. To to this:
        - Turn off your phone
        - Start the Flashtool\X10FlashTool.exe and select Flash. Then select the U20_nAaxxx kernel firmware (this flashes both the kernel.sin and the loader.sin)
        - Keep the back button pressed while connecting the usb cable. Flashtool should detect your phone and flash the kernel.
        - Once done, disconnect the usb cable and power on the phone.
      • Once the logo appears, press the back button repeatedly to enter CWM.
        - Select 'backup and restore -> Backup'
        - Select 'wipe data/factory reset' (RECOMMENDED)
        - Flash the MiniCM7-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM7-xxx.zip
        - Flash gapps
      • Reboot (first boot will take ~2 mins)
      • Once your device has booted, you can navigate to CM Settings -> System -> Update notifications and select 'Register'. This way you can get update notifications on new versions of MiniCM7!
      Please make sure you followed the above steps before reporting any issues, especially 'wipe data/factory reset'


      Downloads: do NOT mirror

      MiniCM7-2.2.2



      Additional comments:

      • (NOTE: With the nAa kernel/CWM, multiboot/encryption is NOT yet supported)


      Thanks!

      • Since I don't have this device, and frankly wasn't going to port my work to the pro, thanks to everyone who volunteered to test and find bugs in this ROM and the nAa kernel:
        gdeliana
        leajian
        siddardha21
        juliuscaesar


      Donate:
      If you are enjoying my work please consider donating: .
      Donations are voluntary but allow me to spend more time on this project.



      Disclaimer:
      I can't be held responsible if this ROM bricks your device or makes it explode in your hands! Use it at your own risk!
      If any of the apps included in the ROM is copyright-protected, please let me know so I can remove it.


      Changelog:
      - 6/7/13 MiniCM7 2.2.2 build
      - 10/6/12 MiniCM7 2.2.1 build
      - 29/3/12 MiniCM7 2.2.0 build
      - 11/2/12 MiniCM7 2.1.9 build
      - 29/1/12 MiniCM7 2.1.8 build
      - 28/12/11 MiniCM7 2.1.7 build
    81
    Keyboard lights

    If keyboard lights don't work for you, go to CM Settings and set the levels correctly:
    Code:
    light sensor value -> k/b brightness value
    0-3 -> 255
    4-15 -> 255
    16-63 -> 255
    64-249 -> 255
    250-(infinite) -> 0
    67
    Build Changelog:
    (Also viewable on your device via: Settings -> CM settings -> System -> View changelog)
    For a full list of Cyanogenmod changes check the gerrit:
    http://review.cyanogenmod.com/#q,status:merged,n,z
    or:
    http://cm-nightlies.appspot.com

    ### MiniCM7-2.2.2
    * 2.6.32 nAa kernel support

    ### MiniCM7-2.2.1
    * CM7.2 RC4

    ### MiniCM7-2.2.0
    * CM7.2 RC1
    * Small bugfixes
    * Improved scrolling performance
    * Updated adreno libs
    * Media profiles update
    * New bootanimation

    ### MiniCM7-2.1.9
    * Improved proximity and light sensors (should solve screen staying black and skype issues)
    * a2sd scripts by texasice (http://xdaforums.com/showpost.php?p=21222591&postcount=1374)
    * a2sd via CM Settings -> Performance menu
    * Blade lockscreen style
    * Option to remove all stored Wifi networks by long pressing
    * Seperate notifications for MiniCM ROM / nAa kernel
    * Fixed Radio FM app RDS allignment
    * adb over network
    * kernel: 2.6.29.6-nAa-11

    ### MiniCM7-2.1.8
    * Improved 2d/3d performance due to new kgsl drivers
    * Configurable centre clock in status bar (Thanks to Felimenta97 for showing me the implementation by JerryScript)
    * ICS Transition animations
    * ICS Rotation animations
    * Various CM bugfixes (last sync was yesterday)
    * kernel: 2.6.29.6-nAa-10

    ### MiniCM7-2.1.7
    * Suport for X10mini pro (mimmi)
    * (CM) T9 dialer for quickly finding contacts
    * If no boot animation is selected, the MiniCM7 logo is shown
    * kernel: 2.6.29.6-nAa-08

    ### MiniCM7-2.1.6
    * Offline charging
    * Show kernel bootlogo if bootanimation is disabled
    * Removed modular overclocking since nAa-07 already has overclocked frequencies to choose from
    * Option to toggle flashlight from lockscreen (CM Settings -> Lockscreen -> Widgets)
    * Fixed OpenGL ES 2.0 version reporting
    * MiniCM7 and OrangeHaze theme updates

    ### MiniCM7-2.1.5
    * Based on CM-7.2.0 (RC0)
    * Suport for X8 (shakira)
    * Focus with camera button while video recording (robyn)
    * Disable network lock dialog after pin input (configurable)

    ### MiniCM7-2.1.4
    * Sensors are now built from source (no compat mode). No sensor delays
    * Many CM fixes related to stability, bugs and new features
    * Disabled automatic light sensor screen dimming
    * Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
    * Liblights fixes

    ### MiniCM7-2.1.3
    * Based on CM-7.1 release (Android 2.3.7)
    * kernel: 2.6.29.6-nAa-05
    * USB tethering
    * New usb drivers
    * Some extra RAM
    * Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
    * Ant+ support

    ### MiniCM7-2.1.2
    * kernel: 2.6.29.6-nAa-04
    * Compcache support (configurable via CM Settings menu)
    * Audio recording quality improvement
    * Ring lockscreen
    * Cherry-picks: Greek dictionary, MIUI-like Battery Bar, Preference to disable bootanimation for faster boot
    * Updated Polish translations
    * Fixed carrier detection and selection

    ### MiniCM7-2.1.1
    * Reverted Custom carrier label since it broke lockscreen unlocking

    ### MiniCM7-2.1.0
    * kernel: 2.6.29-nAa-02
    * Updated wifi/AP modules
    * Fixed 'notification bar difficult to pull up' issue
    * Fake DT updated to doixahn's 007 (in kernel)
    * Major device re-organizing and clean up. Allign with CM/robyn
    * Custom carrier label in CM Settings -> Interface -> Status bar tweaks
    * Clamp the duration of rotary animations
    * Reposition rotary lockscreen for 'drag down to unlock' to work easier
    * Camera support for googles and other apps (X8)
    * Loop ringtone option via: Settings-> CM Settings -> Sound
    * Fixed CWM recovery detection in About -> Phone

    ### MiniCM7-2.0.7
    * CM Setting (input settings) for back button to end current call
    * Added Smartass governor (thanks to AnDyX), not enabled by default
    * Wpa_supplicant / Wifi from sources
    * Rotary doesn't cover caller's name any more
    * LED flash via notification bar
    * Offline charging for X8

    ### MiniCM7-2.0.6
    * netcfg, libbluedroid from sources
    * Improved bluetooth / FM Radio functionality
    * liblights from sources (notifications should blink now)
    * Replaced Launcher2 with ADWLauncher
    * Fixed /data getting filled up with failed download files
    * MDPI and several other fixes for X8

    ### MiniCM7-2.0.5
    * Fixed ddms screen capture
    * Full camera capabilities (photos / video / AF / Flash) using eclair libcamera (thanks to doixanh)
    * Fixed chargemon script for multiboot
    * Smoother 2D scrolling

    ### MiniCM7-2.0.4
    * Android version 2.3.5 (GRJ90)
    * Removed Launcher pro (you can download latest rev. from market)
    * Optimize apks and strip down size
    * Updated LiveWallpapers
    * Updated CWM recovery to 3.2.0.0-r5 x10mini (multiboot + encryption)

    ### MiniCM7-2.0.3
    * Cyanogenmod 7.1.0-RC1
    * Theme updates for various parts
    * Radio app improvements
    * Fixed Usb debugging notification icon
    * backuptool on installation that backs up and restores google propriatery system files
    (no need to reflash gapps if it was already installed)

    ### MiniCM7-2.0.2
    * ClockworkMod recovery v.3.2.0.0-r3 for x10mini
    * Baseband verification on installation
    * Build number: GRJ22 (almost CM7.1) - several changes from Cyanogen
    * Many theme updates for MiniCM7 theme, new OrangeHaze theme
    * SDcard Cache size changed to 128K to avoid music players hiccups

    ### MiniCM7-2.0.1
    * MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    * Camcoder high quality mode (VGA: 640x480)
    * Many Theme updates in numerous system places and applications
    * Cyanogenmod now has an option in CM Settings -> Lock screen -> Style options -> Incoming call style
    * Undervolting and Overclocking handled CM Settings menu (by default none is active)
    * Notification led
    * Fixed audio routing in FM Radio app
    * APN settings listing
    * gralloc reverted to stock (better performance)
    * Sensors fixed, working in compat mode
    * Compass fixed
    * Fixed Magic smoke wallpaper
    * Permission Management for apps by Cyanogenmod
    * Launcher Pro 0.8.6

    ### MiniCM7-2.0.0
    * Cyanogen7.0.3 - Android 2.3.4 code baseline
    * Built for LDPI
    * MiniCM7 theme
    * GSM/SMS/Data(3G, EDGE)
    * Wifi
    * FM Radio
    * Fixed reboots bug
    * Stock audio Recording
    * Flash led (Torch app)
    * ADB at boot
    * Sensors (except proximity and light)
    * OpenGL/3D
    * Audio Jack
    * Video decoder
    * Video playback support for 3rd party apps
    * Vibration
    * GPS
    * Bluetooth
    * App2sd (storing to ext*. Detect ext3/4 partitions and mount as such)
    * Native App2sd
    * xRecovery preinstalled
    * Usb mass storage
    * Audio Mixer
    * Camera (VGA)
    * Stock SE keyboard
    * Offline charging
    * Reboot menu - boot into xRecovery
    * tun module (vpnc)
    * Fake DT support (Thanks to: doixanh, andrej456)
    * Overclocking (Thanks to: doixanh)
    * Mddi lag fix (Thanks to: doixanh)
    * CM Settings performance menu for setting the Sdcard read cache size (speed improvements for sdcard)
    * CM Settings performance menu for CPU Overclocking
    * CM Settings display menu for Ultra brightness
    36
    Notification bar bug on landscape mod fix

    YOU HAVE TO DO THIS MANUALLY

    first extract the zip and then
    just put these 3 files in /system/lib and set the permission 644 (if you dont know what is 644 see any other .so file permission in the same folder and set the same)
    now you are all set just reboot the device
    36
    Hi MiniCM7 fans!

    As promised, MiniCM7-2.2.1 is ready with all the latest code from CM.
    Update notifications are on their way.

    Enjoy!