[ROM][SGH-I317 / t0lteatt][KK][4.4.4] CyanogenMod 11 official nightlies

Search This thread

JCreazy

Senior Member
Jan 15, 2011
436
46
Missouri
Good evening everyone. I have installed cyanogenmod 10.2 latest nightly and I am not very happy with it; I would like to install the most stable 10.1 version however I am unable to locate the .zip file anywhere.

Any hints as to where I can find this file will be greatly appreciated.

You should be able to get them from the goo.im app.

Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
 

shaggyskunk

Recognized Contributor
Nov 22, 2011
19,731
16,043
IDK
Good evening everyone. I have installed cyanogenmod 10.2 latest nightly and I am not very happy with it; I would like to install the most stable 10.1 version however I am unable to locate the .zip file anywhere.

Any hints as to where I can find this file will be greatly appreciated.

Look here http://get.cm/?device=t0lteatt

Sent from my SGH-I317 using Tapatalk 4
 
  • Like
Reactions: tkjeeper

smeatr0n

Senior Member
Jun 22, 2011
614
235
Langley
Looks like we just got our first RC build!

http://get.cm/?device=t0lteatt

cm-10.1.3-RC1-t0lteatt.zip

I saw this and got super excited and flashed it right away. I didn't think we were ever going to see a release for this device. Running it now and it seems more or less the same as the last nightly, speakerphone volume is still super low and Netflix requires some fiddling to make it work. Not sure why it's been decided this was of release standards, even though almost everything else seems to work fine, I thought the cyanogen team had stated it wasn't up to their standards and would be forever a nightly.
But in any case, hellooooo new daily driver.

Edit: also, HDR photos take a rediculously long time to capture. (As was the case with the nightlies) And end up looking like this.
9apeve9y.jpg


-Mertin
 
Last edited:

1stHTCphone

Senior Member
May 15, 2007
159
59
Vancouver
Is anyone else having a problem with in-call use of the dialpad? I can dial just fine and calls connect, but if I open the dialpad while on a call and attempt to navigate through call system menus (such as entering my password in voice mail) the keypresses are not recognized by the other end. Say, for example, my VM password is 6666 - I enter that on the dialpad followed by the # sign, but the receiver does not recognize any of the keys pressed.

This was a clean install - complete reset and then install followed by a cache and Dalvik wipe. Other than the occasional odd black screen glitches, no other problems than this with 10.2.

Anyone? Bueller?

Happens to me for a while now... Specially when I tried to input my pin to retrieve my voice mail.... System always tell me my password is incorrect

Sent from my GT-N7105 using Tapatalk 4
 
Try long pressing the keys, the first time that you try to check your VM. It should work after that.

Sent from my SGH-I317 using Tapatalk 4

OK. Tried that. No luck. I held each key down for about 2 seconds. Bad password. Hung up, redialed VM and then short pressed password. Same result, bad password.

Thanks for the suggestion. Would love for that to have worked...
 

shaggyskunk

Recognized Contributor
Nov 22, 2011
19,731
16,043
IDK
OK. Tried that. No luck. I held each key down for about 2 seconds. Bad password. Hung up, redialed VM and then short pressed password. Same result, bad password.

Thanks for the suggestion. Would love for that to have worked...

Okay - are you long pressing the "1 " on the keypad - if so - try dialing your own phone number - which should take you to your VM - then you'll probably get the same "incorrect password" the first time - but try it at least a couple of times more... It's happened to me on almost every fresh flash of a rom.... I believe that it's something to do with the dtmf settings.... I know that it's a pita... But try again ;)

Sent from my SGH-I317 using Tapatalk 4
 
  • Like
Reactions: da_ferreira
Okay - are you long pressing the "1 " on the keypad - if so - try dialing your own phone number - which should take you to your VM - then you'll probably get the same "incorrect password" the first time - but try it at least a couple of times more... It's happened to me on almost every fresh flash of a rom.... I believe that it's something to do with the dtmf settings.... I know that it's a pita... But try again ;)

Sent from my SGH-I317 using Tapatalk 4

Thank you! Not dialing from the notification and long-pressing 1 to get into VM worked for me. Now it seems to be OK even if I get into VM from the notification. Just had to get past the first hurdle, I guess.
 

aaplus12

Senior Member
Mar 16, 2011
121
30
I clean installed cm10.1 RC1. Everything works fine except GoogleServiceUpdate which is keeping the phone awake all the time. I get zero deep sleep. I tried restarting the phone and also disabled location sharing but still no luck. Is this a known issue of i am missing a tweak. Please help.

Thanks
 

Dr Tone

Senior Member
Jul 19, 2011
167
22
Calgary
I clean installed cm10.1 RC1. Everything works fine except GoogleServiceUpdate which is keeping the phone awake all the time. I get zero deep sleep. I tried restarting the phone and also disabled location sharing but still no luck. Is this a known issue of i am missing a tweak. Please help.

Thanks

I have the same issue. I didn't do a clean install.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
 

MonsterBandit

Senior Member
Dec 10, 2010
727
471
New Jersey
So by fixing the battery screen it will reduce the actual battery drain problem that we are talking about?

Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

No what the article is saying is that if Google did their math a little different it would show a completely different picture to the user.

"Google Services did not use 20 percent of the battery. It actually only used 5.4 percent. Don't pay attention to the numbers, instead pay attention to what they mean."

If you're having a "battery drain issue" it might be related to something else. Try a fresh install wipe battery stats, the whole nine.
 
Last edited:
  • Like
Reactions: shaggyskunk

Top Liked Posts

  • There are no posts matching your filters.
  • 123
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Official CyanogenMod Wik: http://wiki.cyanogenmod.org/w/T0lte_Info


    First time installing CyanogenMod 10.1 to your Galaxy Note 2 LTE (GSM), or coming from another ROM:
    - Read known issues ans FAQs
    - Flash the latest official ClockworkMod-Recovery
    - Copy GApps and CM10.1 ZIPs to your SDCard
    - Boot into Recovery
    - Flash CM10.1 zip from SDCard
    - Flash GApps zip from SDCard
    - DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
    - Reboot
    - Don't restore system data using Titanium Backup!
    - Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

    Upgrading from earlier version of CyanogenMod 10.1:
    - Copy CM10.1 ZIP to your SDCard
    - Boot into Recovery
    - Flash CM10.1 zip from SDCard
    - Reboot

    Upgrading from CyanogenMod 10:
    - Read known issues ans FAQs
    - Copy GApps and CM10.1 ZIPs to your SDCard
    - Boot into Recovery
    - Flash CM10.1 zip from SDCard
    - Flash GApps zip from SDCard
    - Reboot
    - Wipe data of clock app
    - Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs

    Downgrading to 4.1.x ROMs:
    - After flashing your 4.1 ROM, flash the attached file to move your sdcard content out of the 0/ subfolder.


    CM10.1 official nightly builds:
    http://www.get.cm/?device=t0lteatt

    Google Apps:
    http://goo.im/gapps

    http://changelog.bbqdroid.org/#t0lteatt/cm10.1/next

    TEAMHACKSUNG SUPPORT CHAT
    Webchat: http://webchat.freenode.net/?channels=teamhacksung-support

    Server: chat.freenode.net
    Channel: #teamhacksung-support

    Don't expect any support if you:
    - are not running stock cm-kernel
    - have installed any mods
    - have modified system files


    If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
    This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
    Open-Source doesn't meant Out-of-Respect!!!

    cqzsTl.png
    ciPQWl.png
    Smpv0l.png

    o5NZFl.png
    eAJJIl.png


    If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
    Thanks to all donators!
    34
    Great friggin' news:

    Yep, we did it again! Our opensource audio HAL seems to work almost fine.
    Incall earpiece, speaker, mic and bluetooth are working. A2dp works also.
    Since Google Now works properly i assume the Camcorder will be fine, too.
    Headset is working as well.

    Download: cm-10.1-20130125-UNOFFICIAL-t0lte.zip
    Please test it.

    Known bugs:
    - mic mute broken during calls

    you got codeworkx and sbrissen to thank for kick starting this. :highfive::highfive:
    19
    Members yet another Development Thread Cleaned of the OT/Drama/Not Needed type posts, shall we get back to development. And consider this your Warning any more of these not needed type posts, I will be passing out "treats", Thank You.

    BTW how about Members attempt to fix their own problems with a little homework and searching. Instead of posting and waiting on others to come up with your solutions. Thanks
    13
    Thanks, I just installed ForceKernel (OC TO 1,920Mhz) and then run some benchmarks and it's much slower than Perseus, I used to get in Perseus around 7,500 in Quadrant and now I get around 4,500 to 5,500, am I doing something wrong ?

    NOTE: I am using SetCPU and the Governor is "pegasusq"

    world is going to end because your ePenis has narrowed because of less score?
    that's damn hard.
    12
    Please test if this fixes audio over bluetooth for you:
    cm-10.1-20130120-UNOFFICIAL-t0lte.zip