How do I OC with this kernel? Where do I configure this?
Sorry for being noob
Sent from my ♥RUSSIAN♥ SCH-I605 ? jelly beans build 12
How do I OC with this kernel? Where do I configure this?
Sorry for being noob
Sent from my ♥RUSSIAN♥ SCH-I605 ? jelly beans build 12
About UV,
When opinions don't cut it, let the numbers speak
Here: http://xtreview.com/addcomment-id-2...ing-overclocking-and-battery-life-review.html
The test is made with an international Galaxy S3, same CPU as ours
Result after 120 minutes of heavy load:
Stock voltages:
Battery USED = 94%,
Max bat. temp = 53,5*c
Quadrant score = 4760
-100mv uv:
Battery USED = 85,5%
Max bat. temp = 50,3*c
Quadrant score = 4759
-100mv cpu uv, -50mv gpu uv:
Battery USED = 82,5%
Max bat. temp = 48,8*c
Quadrant score = 4746
1+1 = 2
UV, when well done = more battery, less heat, same performance and stability
Here's undervolting seen and experienced by my humble self
Do you rere's really have nothing better to do? Why are you even on this thread if you disagree? Could it be that you are a little jealous that this kernel & thread is getting a little more attention on XDA then yourself? You are helping NOONE by coming in here trolling people, and you are educating noone! We could careless about all those numbers and values, this kernel WORKS and works wonderfully with many different roms. There were alot of members posting questions regarding what values they needed to set to get optimal performance out of this kernel, the dev was simply telling them to flash it and let it do its thing. Because for the most part that is what gets alot of novice users on here messed up, they think they need to download SetCPU and mess with the numbers and before you know it their phone won't wake, among other issues.
OMG
Nobody cares dude, for real, go somewhere else and enlighten someone with your extensive knowledge
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Done :thumbup:
Sent from my SGH-I317 using Xparent Skyblue Tapatalk 2
its amazing to meeveryone but the numb-nuts back some posts saying its a placebo...
check out this thread for info on ZEN... by simba
http://xdaforums.com/showthread.php?t=1420742
Also fast charging at 1698 - THIS IS GREAT for my QCell 6200 mah
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
