[ROM][CM12.1][OFFICIAL] CyanogenMod 12.1 - LS990

Search This thread

clark44

Senior Member
Mar 31, 2011
2,863
6,997
East Lansing
Hello everyone. I have gotton permission from @jholtom to re-open this thread and start building it on my own (we are never alone :D). He will still be here and will still be helping. All credit goes to him, he got this off the ground for the LS990. I'm just here to take over the saddle. Enjoy!

[ROM][Q&A] CM12 Questions and General Thread

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.<br />
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.

Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
Yup. It's finally here. CM12.1 with basically everything* working.

*Working:
Pretty much everything:
WiFi
3G/LTE
Camera (back and front-facing and LED flash,) camcorder works in 1080p, no 4k yet
Sound
Screen (duh)
Proximity, Accelerometer, Gyroscope
GPS
Partial Bluetooth support (FitBit and some other devices not working yet)
SDCard read/write
SMS/MMS
NFC - Yes NFC works now, but needs testing

*Not working:
EVDO Rev. A has some issues with out a patch (its cooked into the unofficial rom already)

CM-12.1 reports of DATA not working, but its working for some Its mostly fixed in 4/23 build, please use ZV8 modem

Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery
1. Download this and 5.1 GApps (recommended PA GApps Here. You are going to need to use the Lollipop ones, this is 5.1)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe if not on CM12, you CAN dirty flash cm12.1 over cm12
6. Flash CM12.1 (no need to wipe System)
7. Flash GApps 5.1
(Optional: flash SuperSU Lollipop Edition for Root. Download here)
8. Reboot
9. wait.. wait ..wait
10. Profit

To get root/SU, enable Developer Options and change "Root Access" options.

Downloads

Official CM Nightly Builds HERE

Latest Unofficial Builds: 7/21/15
Hrubak's Builds Download from MEGA
Mirror: Hrubak's Builds Download from AFH
K0nane Server Links:




Repositories are at github.com/jholtom
Kernel sources are at github.com/invisiblek/android_kernel_lge_g3

Using Cyanogenmod Repositories

@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.

@Berzerker7 @jholtom, shoutout because I stole your thread body.

XDA:DevDB Information
CyanogenMOD 12.1, ROM for the Sprint LG G3

Contributors
clark44, Hrubak, RandomPooka, invisiblek, jholtom, Shelnutt2
Source Code: https://github.com/cyanogenmod

ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status: Nightly
Beta Release Date: 2015-06-23

Created 2014-11-30
Last Updated 2015-07-21
 
Last edited:

PlagaDeRock

Senior Member
Feb 15, 2010
354
22
Apple Town
It looks like Bluetooth is struck out so I'm not sure if it's working here or not but if it isn't RandomPooka has the fix for it.
 

randyrampage609

Senior Member
Sep 9, 2014
503
71
Lanoka Harbor/New Jersey
Hello everyone. I have gotton permission from @jholtom to re-open this thread and start building it on my own. He will still be here and will still be helping. All credit goes to him, he got this off the ground for the LS990. I'm just here to take over the saddle. Enjoy!

<b><font color="Red">Beta is here, go try it</font></b><br />
<br />
<br />
Yup. It's finally here. CM12 with basically everything* working.<br />
<br />
*Working:<br />
Pretty much everything:<br />
WiFi (Reports of 5Ghz being broken)<br />
2G/3G/LTE<br />
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet) (new issues with camera connection error, and quality)<br />
Sound (little bit quiet)<br />
Screen (duh)<br />
Proximity, Accelerometer, Gyroscope<br />
SDCard read/write<br />
GPS (can drain battery really fast)<br />
<br />
*Not working:<br />
Wireless Charging (it works but it's very, very slow)<br />
Bluetooth - (All of it)<br />
NFC - (Might be a battery killer in current state, uninstall or freeze it in TiBu)<br />
<br />
<br />
Installation Instructions:<br />
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.<br />
1. Download this and GApps (recommended PA GApps here You are going to need to use the Lollipop ones, this is 5.0)<br />
2. Put both on Internal Storage<br />
3. Reboot into recovery<br />
4. BACKUP CURRENT ROM<br />
5. Factory Reset/Wipe<br />
6. Flash CM12 (no need to wipe System)<br />
7. Flash GApps<br />
(Optional: flash SuperSU Lollipop Edition for Root. Download here)<br />
8. Reboot<br />
9. ???<br />
10. Profit<br />
<br />
<b>Downloads </b><br />
<br />
K0nane Server Links:
11/30 Build<br />
<br />
Repositories are at github.com/jholtom<br />
Kernel sources are at github.com/invisiblek/android_kernel_lge_g3<br />
<br />
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.<br />
<br />
@Berzerker7 @jholtom, shoutout because I stole your thread body.<br />

XDA:DevDB Information
CyanogenMOD 12, ROM for the Sprint LG G3

Contributors
clark44, jholtom, invisiblek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod

Version Information
Status: Beta
Current Beta Version: 11/30
Beta Release Date: 2014-11-30

Created 2014-11-30
Last Updated 2014-11-30
Do we have an official change log or support forum made?

Sent from my LGLS990 using Tapatalk
 

rjzmanz

Member
Sep 2, 2013
32
2
Atlanta
Can anyone confirm bluetooth is working? I would so use yhis as my daily driver, but previous builds with no bluetooth have made my G Watch a vegetable lol so Ive been going back and forth between CM12 and stock. If theres a fix like mentioned above, could someone post a link? I cant seem to find it.
 

Cleanser2012

Senior Member
Aug 2, 2012
165
47
Chicago
Anyone having trouble connecting to their network? It connect for me when first booted but loses all signal after a few seconds
 

rjzmanz

Member
Sep 2, 2013
32
2
Atlanta
Yeah I second the sprint network not working. It gets roaming signal but not sprint signal. Also its not recognizing my SD card. Anyone else notice this?
 

Cjay1518

Member
Nov 6, 2011
28
1
Is anyone able to get android wear to connect?
It's not working for me.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 73
    Hello everyone. I have gotton permission from @jholtom to re-open this thread and start building it on my own (we are never alone :D). He will still be here and will still be helping. All credit goes to him, he got this off the ground for the LS990. I'm just here to take over the saddle. Enjoy!

    [ROM][Q&A] CM12 Questions and General Thread

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.<br />
    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    */
    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.

    Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
    Yup. It's finally here. CM12.1 with basically everything* working.

    *Working:
    Pretty much everything:
    WiFi
    3G/LTE
    Camera (back and front-facing and LED flash,) camcorder works in 1080p, no 4k yet
    Sound
    Screen (duh)
    Proximity, Accelerometer, Gyroscope
    GPS
    Partial Bluetooth support (FitBit and some other devices not working yet)
    SDCard read/write
    SMS/MMS
    NFC - Yes NFC works now, but needs testing

    *Not working:
    EVDO Rev. A has some issues with out a patch (its cooked into the unofficial rom already)

    CM-12.1 reports of DATA not working, but its working for some Its mostly fixed in 4/23 build, please use ZV8 modem

    Installation Instructions:
    *NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery
    1. Download this and 5.1 GApps (recommended PA GApps Here. You are going to need to use the Lollipop ones, this is 5.1)
    2. Put both on Internal Storage
    3. Reboot into recovery
    4. BACKUP CURRENT ROM
    5. Factory Reset/Wipe if not on CM12, you CAN dirty flash cm12.1 over cm12
    6. Flash CM12.1 (no need to wipe System)
    7. Flash GApps 5.1
    (Optional: flash SuperSU Lollipop Edition for Root. Download here)
    8. Reboot
    9. wait.. wait ..wait
    10. Profit

    To get root/SU, enable Developer Options and change "Root Access" options.

    Downloads

    Official CM Nightly Builds HERE

    Latest Unofficial Builds: 7/21/15
    Hrubak's Builds Download from MEGA
    Mirror: Hrubak's Builds Download from AFH
    K0nane Server Links:




    Repositories are at github.com/jholtom
    Kernel sources are at github.com/invisiblek/android_kernel_lge_g3

    Using Cyanogenmod Repositories

    @invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.

    @Berzerker7 @jholtom, shoutout because I stole your thread body.

    XDA:DevDB Information
    CyanogenMOD 12.1, ROM for the Sprint LG G3

    Contributors
    clark44, Hrubak, RandomPooka, invisiblek, jholtom, Shelnutt2
    Source Code: https://github.com/cyanogenmod

    ROM OS Version: 5.1.x Lollipop
    ROM Kernel: Linux 3.4.x
    Based On: CyanogenMod

    Version Information
    Status: Nightly
    Beta Release Date: 2015-06-23

    Created 2014-11-30
    Last Updated 2015-07-21
    29
    I will be maintaining the ls990. I'm just polishing off ls980 and ls970 with cm12 first.
    25
    Just an update, lgog and LS980 are squared away with their pending commits so I'm focusing on LS990 now.

    NFC is almost fixed, rashed and I narrowed down the issue and implemented a partial fix, just need some polishing.

    Sending sms issue in stock is being evaluated.

    Those are the last two blockers before official nightlies.
    19
    Okay video recording works but you need to manually set the resolution back to 1080p (its set to 4k). I'm compiling another build now with 4k removed but I'm also uploading a build with it included for those who don't want to wait for the build to finish. Don't complain if video recording doesn't work and you didn't read this post dummy. Thanks!

    12/4 Build with 4k enabled (Set it back to 1080 for video recording to work)

    Edit: O & it's runnin 5.0.1 (Shanks google!)
    17
    NFCs been fixed. Officially nightlies start tonight.

    Sent from my LG-ls990 using XDA Free mobile app