Now that also lumia 800 has tango...is there any chance to have iterop unlock if we have the new bootloader ???
No.
Now that also lumia 800 has tango...is there any chance to have iterop unlock if we have the new bootloader ???
Hi! First of all I want to apologize if my post is stupid, I'm new in the WP universe so..
But I saw that we can flash lumia 800 devices with Nokia Care Suite, and this flash can upgrade the bootloader from Qualcomm to DLOAD. So can't we think to play around for reversing this operation, just flashing a qualcomm bootloader instead of the DLOAD?
I know that if it was so simple as that the devs have been interopt unlocked le DLOAD's lumia 800 for a long time now, but I don't understand where it can fail in this process..
Sorry again for my poor english and if my question is stupid..
And thanks to the devs for their hard work!
I have my lumia 710 with revision 2.1
I had a locked bootloader, but I have unlocked it while flashing 12050 firmware with NCS. Really interesting
---------- Post added at 01:17 PM ---------- Previous post was at 01:05 PM ----------
http://narod.ru/disk/45935058001.2aaca38c9acf622332f4a81b5bf0e331/RM-803.rar.html
the same files but uploaded to mediafire:
file 1: http://www.mediafire.com/?79z739zzf5cuhxa
file 2: http://www.mediafire.com/?6fed8oaz87j9ln9
.not sure, but I think I've flashed my lumia 710 with this firmware and had unlocked my bootloader
I have my lumia 710 with revision 2.1
I had a locked bootloader, but I have unlocked it while flashing 12050 firmware with NCS. Really interesting
---------- Post added at 01:17 PM ---------- Previous post was at 01:05 PM ----------
http://narod.ru/disk/45935058001.2aaca38c9acf622332f4a81b5bf0e331/RM-803.rar.html
the same files but uploaded to mediafire:
file 1: http://www.mediafire.com/?79z739zzf5cuhxa
file 2: http://www.mediafire.com/?6fed8oaz87j9ln9
.not sure, but I think I've flashed my lumia 710 with this firmware and had unlocked my bootloader
Sorry, but it is impossible (never possible) or not yet possible to unlock Nokia DLOAD bootloader?
please help guys im in a real trouble
first of all im new on wp7
in all cases when i tried to flash a new rom, after windows detected and installed some updates i gor external drive and it was ( must be ) format, so i formated...then plug phone with usb and volume up detected qualacomm .... and istallation of driver failed, pluged usb with volume down qhsusb dload detected and failed also to install driver and from that time till now i cant use mz phone, screen is black phone never on nor off no vibration as it is switched off BUT once plugged with pc it detects the dload again,......no i dea what to do at all
[ 655.912077] usb 2-2: new high speed USB device number 9 using ehci_hcd
[ 661.797096] usb 2-2: USB disconnect, device number 9
[ 765.836050] usb 2-2: new high speed USB device number 10 using ehci_hcd
[ 765.968707] usb 2-2: config 1 has an invalid interface number: 20 but max is 1
[ 765.968713] usb 2-2: config 1 has no interface number 1
[ 766.869700] usbcore: registered new interface driver uas
[ 766.905673] Initializing USB Mass Storage driver...
[ 766.905816] scsi2 : usb-storage 2-2:1.20
[ 766.906108] usbcore: registered new interface driver usb-storage
[ 766.906110] USB Mass Storage support registered.
[ 767.906264] scsi 2:0:0:0: Direct-Access Qualcomm MMC Storage 2.31 PQ: 0 ANSI: 2
[ 767.964504] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 767.968542] sd 2:0:0:0: [sdb] 31047680 512-byte logical blocks: (15.8 GB/14.8 GiB)
[ 767.969066] sd 2:0:0:0: [sdb] Write Protect is off
[ 767.969069] sd 2:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[ 767.970061] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 767.977005] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[ 767.977264] sdb: p9 size 30632075 extends beyond EOD, enabling native capacity
[ 767.983196] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[ 767.983463] sdb: p9 size 30632075 extends beyond EOD, truncated
[ 767.988075] sd 2:0:0:0: [sdb] Attached SCSI removable disk
_wmstore
!zLH?k
_wmpart_B
_wmpart_S
_wmpart_S
_wmpart_N
_wmpart_U
_wmpart_D
_wmpart_I
_wmpart_P
_wmpart_U
PSBdX
GFCB
SRPX
*** Compiling the LK Android bootloader ***
** Tested on Ubuntu 11.10 with Lumia 710 **
1) Get the toolchain and install:
wget https://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/arm-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
sudo tar xvf arm-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 --directory /opt/
2) Compile the bootloader:
PATH=/opt/arm-2009q1/bin:$PATH TOOLCHAIN_PREFIX=arm-none-linux-gnueabi- PROJECT=msm7630_surf make EMMC_BOOT=1
3) Get your Lumia into diagnostics mode (turn it on using VOL UP + VOL DOWN + POWER)
4) BACKUP EVERY SINGLE FILE FROM THE 150MB PARTITION! (Just to be safe)
5) Replace the image/emmcboot.mbn file with your freshly compiled LK bootloader
cp <repo dir>/build-msm7630_surf/EMMCBOOT.MBN /media/<mount point>/image2/emmcboot.mbn
6) Unmount the bootloader partition from your PC and pull the phone's battery
7) Turn on, wait a few moments, and plug the phone to the PC
8) Test the fastboot connection:
fastboot devices
fastboot getvar version
Yes you are right, I had checked that too,
but I'm a bit scary to brick my phone
what are the benefits of putting an linux kernel, can i still acess wp7 software, and could i flash android on it ?