Thanks Kalo, rom perfect, I hope to install on my phone, your new roms, but this time with ICS, I would be honored.:fingers-crossed:
2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)
- Thread starter kalo86
- Start date
-
- Tags
- development
Dear Kalo, I wanted to let you know that after trying for a few days the official rom ICS, I'm finally back to your rom that isn't beautiful, but beautiful, even the phone seems to rejoice at the decision, it's all another film.
Caro Kalo, volevo farti sapere che dopo aver provato per qualche giorno la rom ufficiale ICS, sono finalmente tornato alla tua rom che non è bella, ma stupenda, anche il telefono sembra gioirne della decisione, è tutto un altro film.
Caro Kalo, volevo farti sapere che dopo aver provato per qualche giorno la rom ufficiale ICS, sono finalmente tornato alla tua rom che non è bella, ma stupenda, anche il telefono sembra gioirne della decisione, è tutto un altro film.
Hello People!
I noticed that a lot of people downloaded the overclocked boot.img from the download list.
For this reason I am uploading a new ROM with these changes:
- The new boot.img has the overclock possibility;
- Edited the framework-res.apk in the notification area because in many cases it was impossible to read the dark text.
If you have just installed the B876_KALO_Perfection, you can simply extract boot.img and framework-res.apk and overwrite them (pay atention with framework-res.apk because it requires special Permissions).
For new users the new ROM it's just updated, but the name is always the same B876_KALO_Perfection.
Regards,
kalo
I noticed that a lot of people downloaded the overclocked boot.img from the download list.
For this reason I am uploading a new ROM with these changes:
- The new boot.img has the overclock possibility;
- Edited the framework-res.apk in the notification area because in many cases it was impossible to read the dark text.
If you have just installed the B876_KALO_Perfection, you can simply extract boot.img and framework-res.apk and overwrite them (pay atention with framework-res.apk because it requires special Permissions).
For new users the new ROM it's just updated, but the name is always the same B876_KALO_Perfection.
Regards,
kalo
place modded framework apk into system folder, set permissions rw-r--r-- and place it into framework folder: \\system\framework\. Replace the original one. Reboot
Please uncheck the Timestamp GMT into Messages settings!Hello to all,
Yesterday i flash the latest version of kalo's rom and i have one question why when i receive a msg it write that i received it few hours before :/ how can i fix it???
Btw the rom is very nice!! :good::good::good:
Kalo
may I start by saying Perfection is excellent. I only have one problem, maybe you can help me with it? If I am connected to data, I cannot connect to Wifi. The phone will obtain IP address and then connect for a second, but then immediately disconnect. But if I have data off wifi connects just fine. I did not have this problem with Reloaded... did anything change between versions what would make this happen?
Thanks in advanced
may I start by saying Perfection is excellent. I only have one problem, maybe you can help me with it? If I am connected to data, I cannot connect to Wifi. The phone will obtain IP address and then connect for a second, but then immediately disconnect. But if I have data off wifi connects just fine. I did not have this problem with Reloaded... did anything change between versions what would make this happen?
Thanks in advanced
Kalo
may I start by saying Perfection is excellent. I only have one problem, maybe you can help me with it? If I am connected to data, I cannot connect to Wifi. The phone will obtain IP address and then connect for a second, but then immediately disconnect. But if I have data off wifi connects just fine. I did not have this problem with Reloaded... did anything change between versions what would make this happen?
Thanks in advanced
I'm uploading the fixed ROM, thank you for describing the issue.
Anyway I had to change something on connection.
Please install the new ROM to fix the issue.
Regards,
kalo
Kalo thanks for your perfect ROM.i really appreciate it. i am have same problem with wifi. What do i do now. Install your new ROM?
Sent from my U8800pro using xda app-developers app
I flashed the new zip and the wifi problem remains. when I first reboot the device I can get onto wifi, but once I get a data connection it kicks me off again. I really enjoy your roms and would like to use perfection as my daily rom, but I am going to have an expensive cell bill if I forget to turn off data when I want to use wifi
Thanks in advanced
Thanks in advanced
Ok, I need more time to find the problem then, I'm sorry to hear this!I flashed the new zip and the wifi problem remains. when I first reboot the device I can get onto wifi, but once I get a data connection it kicks me off again. I really enjoy your roms and would like to use perfection as my daily rom, but I am going to have an expensive cell bill if I forget to turn off data when I want to use wifi
Thanks in advanced
I hope to upload as soon as possible a new version and I ask to you if you can test the fix.
Regards!
Alright. I can just stay reloaded until then! Take your time, I'll look for the new version tonight after work.
Thanks in advance!
Error in widgets
Kalo, I am experiencing a bug since your very early versions I cannot eliminate.
I do use some widgets (Meteo, news, other things...), but sometimes, when the phone hangs, reboots or otherwise malfunctions and I have to reboot manually (with AnReboot, usually), all widgets disappear replaced by a "There was an error during widget loading" (in Italian "Errore durante il caricamento del widget"). This used to happen with Go Launcher EX (which I love otherwise) that I replaced, thinking it was a Go Launcher bug, but then I discovered that the same issue happens with Zeam Launcher, too, so it must be something more serious... I tried to wipe both cache and dalvik cache... nope, no luck, error still there. And from what I remember I am not the only one experiencing this issue... Can you please check?...
Thank you, keep up the good work!
Paolo.
P.S.: what did you mean that you are not sure you will still have the 8800pro next week???
Kalo, I am experiencing a bug since your very early versions I cannot eliminate.
I do use some widgets (Meteo, news, other things...), but sometimes, when the phone hangs, reboots or otherwise malfunctions and I have to reboot manually (with AnReboot, usually), all widgets disappear replaced by a "There was an error during widget loading" (in Italian "Errore durante il caricamento del widget"). This used to happen with Go Launcher EX (which I love otherwise) that I replaced, thinking it was a Go Launcher bug, but then I discovered that the same issue happens with Zeam Launcher, too, so it must be something more serious... I tried to wipe both cache and dalvik cache... nope, no luck, error still there. And from what I remember I am not the only one experiencing this issue... Can you please check?...
Thank you, keep up the good work!
Paolo.
P.S.: what did you mean that you are not sure you will still have the 8800pro next week???
>Thats good, but still having an old timezone info inside
>Yekatherinburg must be +6
>It seems that those last Kalo's perfection was made in quick hurry...(
Oh, sorry for that! I've had my date set to 1980 year in past, and android set +6 fix when using today dates, which is impressive!
Thats good!
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
412012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)
Hello Dear Community!
Today I decided to share my work, a customized rom based on the latest Gingerbread official ROM of the Huawei Honor U8860.
This porting wants to be the most light possible, avoiding the Huawei traces and trying to make difference with stability, speed and zero bugs.
This is a list of the rom features:
- Based on Gingerbread 2.3.6 – Official B876 (Firmware Huawei Honor U8860);
- Root permanent permission;
- Overclock kernel;
- Unlocked FPS limit (30 @ 55);
- Zipaligned apks;
- Added BusyBox;
- Removed Gallery 3D and replaced with QuickPic;
- Removed Huawei Launcher and replaced with Zeam Launcher;
- Corrected APNs list (only the Italian Internet Wind apn);
- Edited carrier name "Wind Telecomunicazioni Spa" into "WIND";
- Edited carrier name "Telecom Italia SpA" into "TIM";
- Edited carrier name "Hutchinson H3G Italia" into "3 ITA";
- Removed the stock Browser and replaced with Dolphin Browser HD;
- Updated Market (now Google Play), Google Search Box, FlashPlayer;
- Removed Social Huawei and other apks from the stock rom;
- Increased performance by editing build.prop;
- Enabled HDR function on camera;
- Removed File Browser and replaced with Root Explorer;
- Independence of the /cust partition;
- Removed WPS function on WiFi section;
- Removed ipcall function;
- Added the battery percentage on the status bar;
- Stock Android Gingerbread lockscreen;
- Removed the energy saving function;
- Bypass of the Android Settings Wizard;
- Optimized the GPS config for Europe;
- Tethering WiFi is available and works fine;
- Added by default the Quick Settings Widget in the notification bar;
- FM Radio works fine;
- Added function Volume Rocker Screen Wake Up;
- A new graphic for Contacts and Phone applications;
- Removed Fast Boot option;
- Patched the libsqlite.so for better performances;
- Disabled bugreports generation in kernel ramdisk;
- Permanent Root Access;
- No more is needed SuperUser.apk for root-based applications;
- The default video codec for High Video Recording Quality is H264;
- The default audio codec for High Video Recording Quality id AAC;
- Edited the carrier name "Sonaecom - Serviços de Comunicações, S.A." into "Optimus";
PREREQUISITES - ATTENTION PLEASE
a) ROM
Gingerbread 2.3.5 Stock Huawei version (B512, B521, B540, B552, B565, B572)
or any customized Gingerbread ROM (CyanogenMod, MIUI, 2.3.5, 2.3.6, 2.3.7)
or any ICS Rom (DZO Aurora, Genokolar MIUI v4);
b) Recovery
CWM Recovery 5.0.2.7
If you have the stock recovery, you will not be able to install any customized ROM. So, you have to do these steps: download the CWM Recovery 5.0.2.7 (previous link to download the file), power off your device and turn on into Pink Screen Mode (holding down VOL+, VOL- and Power button). Plug in your usb cable to your pc and wait for the automount of the new drive. Navigate to the /image folder and rename the stock "recovery.img" into "recovery.bak".
Now simply copy the CWM Recovery into the /image folder and be sure that its name is "recovery.img", otherwise you have to rename it into "recovery.img".
Unmount the periferic, remove the usb cable and extract the battery to shutdown the phone. That's all.
You can verify the new recovery installation entering in recovery mode (holding down VOL+ and Power button).
INSTALLATION PROCEDURE FOR FULL PACKAGE
0) Make sure that you have installed all prerequisites;
1) Download the zip file of the rom with your pc;
2) Shutdown your smartphone and to be really sure unplug the battery;
3) Insert your battery and power on your smartphone into recovery mode holding down VOL+ and the power button (be sure that you have the CWM 5.0.2.7);
4) Go to advanced ---> reboot recovery;
5) At the new recovery boot go to "mount and storage";
6) Mount usb storage;
7) Plug in your usb-microusb cable;
8) Copy the downloaded zip file into the external sdcard;
9) Wipe data/factory;
10) Wipe cache;
11) Wipe Dalvik Cache;
12) [OPTIONAL if you experience a huge battery drain only] Wipe Battery Stats;
13) Go to "mount and storage", then "format /system";
14) Install zip from sdcard;
15) choose zip from sdcard and select the downloaded zip file;
16) Install complete!
17) reboot system now.
Please wait about 2 minutes for the install process and be patient for the first boot.
At the first boot the default language has been set to English. This choise because the rom needs to be more international possible.
Anyway the rom is multilanguage and offers the default available languages of the stock Android base-rom.
The default keyboard is the stock Android Latin.
DOWNLOAD
Date: 2012/08/22
File name: B876_KALO_Extreme.zip
Changelog: Increased the 3G speed, fixed the network dropping from 2G/3G, updated applications.
If you appreciate my work and want to thank me, please send a donation, it's a huge reason to keep alive this Android project for U8800 Pro.
DONATE (PayPal)
FaceBook Group Page -----> KALO ANDROID U8800 Pro
Special thanks:
- Genokolar (kernel and recovery Guru);
- mik_os (libsqlite.so tweaks);
- pikachukaki (theme creator and tester for his B876 based-ROM);
- zontovolo (the best beta-tester I've seen!);
- cuvetto (for the better audio experience);
- merafly (for his advices and suggestions);
- tasosmrs (for the modded phone.apk)
- All users who are using/testing my releases;
SPECIAL THANKS TO DONATORS:
- Nektarios Orfanidis;
- Pavel Igorevich;
- Denis Avetsuk;
- Eugenio Livio;
- José Alexis Morera Fernández;
Happy flashing!
kalo868well done
i'm glad , because you put the ,, patched libsqlite ,, in your update (1.7) ...
its a great work from ,, mik_os ( a great developer )
i think that this version , gonna make even happier the users of your rom...
i'm a fan of your work , even if i'm steel riding my horse ...
congratsulations again ..
for those who still wondering what it does
read this and i hope you'll understand.......
Android phones as the underlying database using sqlite3. sqlite3 writes efficiency is very low, because the sync feature turned on by default, and fsync() must be performed after each insertion, the resulting system efficiency is low, and the disk life is reduced.
I try to disable sync feature by default in exchange for greater IO performance and reduce disk consumption. While doing so may result in data integrity problems, but I still like to use it because most of the sqlite insert action can be completed within a few seconds, not too much to consider issues such as sudden power-down.
After modified, the time of insert 2000 records to sqlite3 db, from 1m11s reduce to 2s.
-----------------------------
With Android applications, the database operation is non-persistent, normal step in app is:
1.open db
2.do read/write
3.close db
with step3, the data in cache will be flush to disk. so user will not notice any sudden lag, always smooth.
With SYNC-ON, the db operation like this:
1.open db
2.1. write a record/do a transcation
2.2. fsync()
2.3. write a record/do a transcation
2.4. fsync()
.....
3.close db/fsync()
with SYNC-OFF, operation like this:
1.open db
2.1 write a record/do a transcation
2.2 write a record/do a transcation
....
3. close db/fsync()
So, no-sync can significantly save IO time.6
i think that you have the tools and knowledge to do it yourself ...
take a look at this ...
http://xdaforums.com/showthread.php?t=1411317
try it yourself , and tell me if you want something more ....
I FOUND IT
download this ... http://www.mediafire.com/?2ues73f06ialncf
i was made this for kalo's v1 , but i think its the same,, so you can use it ....
unzip , and open the folder ..
first make a BACKUP ,, and then put it via root explorer , in , system/framework .. (replace it with the existing one)
give permissions ( rw-r--r-- ) , and reboot your phone ..
dont worry , it needs 2-3 minutes to boot again ...
THIS IS ONLY FOR TERMAGAZIS
IF HE TEST IT AND ITS OK ,,
Then you can use it , all the others , users of this rom
so we'll have to wait , termagazis to respond , and tell us if it works6TO ALL OF YOU , USERS OF THIS ROM ( KALO V1.6 )
DOWNLOAD THIS
http://www.mediafire.com/?7i3tjuvlgtayzrx
ITS a patched ,libsqlite.so for 2.3
probably its gonna work....
just open root explorer and copy , libsqlite.so , to ,system/lib . ..
replace it with the existing one and give permissions ( rw-r--r-- )
wait , or reboot your phone .....
if this works , you're gonna love this rom , even more ...
HAVE A BACKUP ON YOUR SD CARD BEFORE TRYING THIS MODS...
ALL GREDITS GOES TO
Μik_os
Ungaze
I just found it at this thread
http://xdaforums.com/showthread.php?t=1000899
enjoy6well.. friend , korekore1 ,, is right about MIUI dialer , its more than a theme ...
so i decide to make a dialer for , KALO V1.8 ,, and probably gonna work also for V1.6 and V1.7 .....
i took the .png's from , bluemagic theme ...
THEMED DIALER ... download
http://www.mediafire.com/?eep3y6km85m57fe
and the , themed settings.apk , gonna work also for V1.8 ...
http://www.mediafire.com/?7lkzal5skit8hvl
HOW TO INSTALL , the themed dialer ...
first , unzip ..
then , via root explorer , COPY , the contacts.apk and phone.apk , and PASTE them to ,, system ,, give permissions (rw-r--r-- ) and then ,MOVE , both apps to ,, app ,, and replace them ... reboot and enjoy ...
the path is ,, system/app ,, but we have to do the above trick to avoid force close before we give permissions ,, thats why we give permissions to ,, system ,, and then we move them to ,, app .... ( easy)
if someone could make screenshots , i appreciate it ....