FORUMS
Remove All Ads from XDA

[APP] USB OTG Helper v6 ☰ Update 16-12-12 ☰ [ROOT] (Stock/Custom kernel)

1,102 posts
Thanks Meter: 1,724
 
By shardul_seth, Senior Member on 8th April 2012, 07:14 PM
Post Reply Email Thread
30th April 2012, 09:20 AM |#21  
Junior Member
Thanks Meter: 0
 
More
my OTG cable has problem ?
when i connect 2GB USB stick to my Arc S, Nothing happen, the LED light on the USB stick doesn't light, and My phone cannot connect with it. I don't know my Arc S or my cable has problem but My uSb stick normally connected to PC. Can you tell me when you connect USB stick to your phone ( without istalling driver or USB OTG helper apk), the LED light on your USB stick bright or not ? And does it just bright when the USB stick connected to phone ?
30th April 2012, 09:23 AM |#22  
aprilian8's Avatar
Member
Flag Bangalore
Thanks Meter: 2
 
More
Hi I am on ICS .562 and stock kernel with root but its not working for me.
30th April 2012, 09:37 AM |#23  
Senior Member
Flag Lyon
Thanks Meter: 77
 
More
Same here... I wouldn't be surprised if the necessary ICS module is missing...

Does an ICS compatible Snapdragon usb-storage.ko exist ?
30th April 2012, 09:38 AM |#24  
shardul_seth's Avatar
OP Senior Member
Thanks Meter: 1,724
 
More
Quote:
Originally Posted by zero04111990

when i connect 2GB USB stick to my Arc S, Nothing happen, the LED light on the USB stick doesn't light, and My phone cannot connect with it. I don't know my Arc S or my cable has problem but My uSb stick normally connected to PC. Can you tell me when you connect USB stick to your phone ( without istalling driver or USB OTG helper apk), the LED light on your USB stick bright or not ? And does it just bright when the USB stick connected to phone ?

Quote:
Originally Posted by aprilian8

Hi I am on ICS .562 and stock kernel with root but its not working for me.

Without driver, it does not light up.. After Install, it should light up..

Please describe in detail what steps you have taken ("not working for me" does not help debugging..)
For me, ICS, .562, my close-to-stock kernel, everything is working as it should!
30th April 2012, 10:22 AM |#25  
aprilian8's Avatar
Member
Flag Bangalore
Thanks Meter: 2
 
More
Quote:
Originally Posted by shardul_seth

Without driver, it does not light up.. After Install, it should light up..

Please describe in detail what steps you have taken ("not working for me" does not help debugging..)
For me, ICS, .562, my close-to-stock kernel, everything is working as it should!

I had been using ICS .562 NORDIC with root and your modified stock kernel boot_stock_ICS_initd_root_cwm_v2. on which installed USB OTG helper but when I connect the cable run setup and apply mount it shows "No devices found to mount".

EDIT: I am trying to connect a 4GB transcend pen drive
30th April 2012, 10:51 AM |#26  
shardul_seth's Avatar
OP Senior Member
Thanks Meter: 1,724
 
More
please click install first.. then click mount..
also check if drive is NOT NTFS..
30th April 2012, 11:21 AM |#27  
aprilian8's Avatar
Member
Flag Bangalore
Thanks Meter: 2
 
More
Quote:
Originally Posted by shardul_seth

please click install first.. then click mount..
also check if drive is NOT NTFS..

I already clicked setup(setup for stock kernel, its grey now) and then clicked mount. my usb is FAT32 formatted
Attached Thumbnails
Click image for larger version

Name:	Screenshot_2012-04-30-14-57-56.jpg
Views:	738
Size:	20.6 KB
ID:	1032408  
30th April 2012, 01:21 PM |#28  
max_r's Avatar
Senior Member
Thanks Meter: 68
 
More
i will try
30th April 2012, 01:48 PM |#29  
shardul_seth's Avatar
OP Senior Member
Thanks Meter: 1,724
 
More
Quote:
Originally Posted by aprilian8

I already clicked setup(setup for stock kernel, its grey now) and then clicked mount. my usb is FAT32 formatted

1. Please download the attached script and move to sdcard
2. Open up Script manager
3. Connect USB OTG cable.
4. Open USB OTG App and check that modules are live (Install is grey'ed out)
5. Find the script on sdcard and run as root (click the skull symbol before hitting run)
6. Copy debug_otg.txt from /sdcard and attach it here!
Attached Files
File Type: txt debug_otg.sh.txt - [Click for QR Code] (280 Bytes, 1365 views)
30th April 2012, 03:24 PM |#30  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by shardul_seth

1. Please download the attached script and move to sdcard
2. Open up Script manager
3. Connect USB OTG cable.
4. Open USB OTG App and check that modules are live (Install is grey'ed out)
5. Find the script on sdcard and run as root (click the skull symbol before hitting run)
6. Copy debug_otg.txt from /sdcard and attach it here!

how can i check modules are live ?
30th April 2012, 03:41 PM |#31  
shardul_seth's Avatar
OP Senior Member
Thanks Meter: 1,724
 
More
no bother, just connect flash drive, run the script and send me the output
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes