[S-OFF] Juopunutbear S-OFF

Status
Not open for further replies.
Search This thread

superevilllama

Senior Member
Jun 14, 2007
400
110
As this is a tool that most poeple only use once, and the process has not changed since it was released, I am trying to determine what would possibly lead anyone to post anything but thanks in this thread at this present time.

Any questions you may have, more than likely after 83 pages of info for a tool that again hasn't changed since it was released, have probably been answered.

A quick search, not even having to read all 83 pages, should get you the information you are looking for. My thought process is telling me that if you are unable to use the search feature, you more than likely also not ready to do what is required to achieve S-OFF (wire trick) althought it really is not complicated, but more a matter of timing.

At some point I think a thread like this should be closed and left stickied as a reference only, or open only for thanks posts.. just my 60 cents on the matter.
 
G

glacierguy

Guest
As this is a tool that most poeple only use once, and the process has not changed since it was released, I am trying to determine what would possibly lead anyone to post anything but thanks in this thread at this present time.

Any questions you may have, more than likely after 83 pages of info for a tool that again hasn't changed since it was released, have probably been answered.

A quick search, not even having to read all 83 pages, should get you the information you are looking for. My thought process is telling me that if you are unable to use the search feature, you more than likely also not ready to do what is required to achieve S-OFF (wire trick) althought it really is not complicated, but more a matter of timing.

At some point I think a thread like this should be closed and left stickied as a reference only, or open only for thanks posts.. just my 60 cents on the matter.

I will add $.40 to make it a dollar

Sent from my HTC Ruby

HTC Amaze 4g BIBLE- Google.doc Updated Often

The Ultimate Guide to Everything Amaze-ing!(Amaze 4g BIBLE!)
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 125
    Instructions and Downloads:

    http://unlimited.io/juopunutbear.htm

    Support:

    Support for our tools is via IRC channel #unlimited on freenode ONLY. If you do not have an IRC client you can use this link.

    We DO NOT provide support, instructions, or downloads via XDA. Please see our website: http://unlimited.io


    Using how-to guides, "kits" and using other instructions on XDA to S-OFF your device is not recommended and will not be supported by Team Unlimited. If you want the best experience and results - go direct to the source. Dealing with support issues through the forums is inefficient and posts may get lost in long support threads, of which we would have too many to actively monitor. We have therefore decided that all support should be through our IRC channel. This will allow us to help you in real-time and through the whole process.


    **You may not redistribute nor link directly to any of our tools without the expressed consent of Team Unlimited. We DO NOT authorize any dev use of our tools within other kits or tools.**
    6
    Place your Prerequisites
    on the main page of your site... Simple[/QUOTE][/QUOTE]

    Stop your *****in... Its your fault you didn't take precaution and read the instructions. Stop blaming this on the people that put there hard work into giving you s off just because you ****ed up
    5
    This works great, will donate my pledge since my Amaze is now s-off!! First thing I did was flash this splash...NO MOAR WHITE!!!!

    uwuQU.png



    It is attached, unzip and then it be can flashed via fastboot;

    Code:
    fastboot splash splash1 splash_black.img
    5
    I think having the proper "tools" makes this really simple... also the timing... so here let me try and help those who are having some issues...

    1. there are normally two sizes of paper clip, large and small, if you can find a small paper clip with plastic coating this is ideal... keeping the paper clip "flat" just kind of "unroll" it open, then just strip 1/4" off each end, now bend the shortest end 90 degrees down, then bend the paper clip to be "open" from the 90 degree tip, to the other end to be wide enough that you can stick the bent part into the hole, and then just by "rocking" the paper clip a little you can touch the other end to the ground point... now you are ready
    2. if you're really worried about the plastic not being enough insulation then use something like electrical tape where you will grip the paper clip, or use a small potato chip bag clip to hold the paper clip with
    3. start the program
    4. go ahead and stick the bent end of the paper clip in the hole, but DON'T TOUCH THE GROUND yet...
    5. wait for the prompt to do the wire trick
    6. touch and swipe the end of the paper clip across the ground, if you don't hear the sound from USB connect/disconnect then you haven't gotten the first touch to "connect" keep trying until you hear this sound
    7. AFTER hearing this sound wait the 1.5-1.75 secs, and touch/swipe the paper clip again... you should be good to go now...

    I just found the wire I was using at first just not stiff enough to make a good connection... this worked on the first try for me!
    4
    I made a little video for people who wanted something to see first, before they try it.

    thanks to everyone in the JuopunutBear IRC chat for the support.

    http://www.youtube.com/watch?v=PUDSwQbCVF8&feature=youtu.be