[GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter

Search This thread
By:
Advanced…
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
DISCLAIMER:


I'm NOT responsible for any damage you cause to your phone.
Be sure to follow the steps correctly.​



REQUIREMENTS:
  • Windows

  • Samsung KIES and all drivers installed.

  • ODIN for flashing the firmware.



HOW TO ROOT:
  1. Download the Pre-Rooted firmware that matches the firmware your using.


  2. Extract the RAR file, you will end up with a folder with two files in it.
    SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


  3. Close any KIES application that might be open.


  4. Open ODIN.


  5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


  6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


  7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
    Do NOT select "Repartition"


  8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


  9. Plug your phone usb cable to your computer.
    If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


  10. Click the "START" button and wait for it to finish.
    Do NOT unplug the usb cable before ODIN finishes its job.


    If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
    Then you can remove the usb cable.
    Your device will reboot in Recovery Mode and will finish the installation.
    When it finishes, it will reboot and start the Android System.



  11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





That's it! :good:
Now, enjoy your rooted Galaxy S Advance! :cool:
You can go back to Download Mode to check that your Binary Counter hasn't increased.



DONATIONS:
Consider making a donation,
It helps support developers so they can keep doing a great job!
Donate via Paypal :good:
 
  • Like
Reactions: Sphynxie, Himanshupokharell, googleminded and 84 others
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
GT-I9070 Rooted Firmwares:


REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
DOWNLOAD

REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
DOWNLOAD

REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
DOWNLOAD

REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
DOWNLOAD

REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
DOWNLOAD

REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
DOWNLOAD

REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
DOWNLOAD

REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
DOWNLOAD

REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
DOWNLOAD

REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD

REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD

REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
DOWNLOAD

REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
DOWNLOAD

REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
DOWNLOAD

REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
DOWNLOAD

REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
DOWNLOAD

REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
DOWNLOAD

REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
DOWNLOAD

REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
DOWNLOAD

REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
DOWNLOAD

REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
DOWNLOAD

REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
DOWNLOAD

REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
DOWNLOAD

REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
DOWNLOAD

REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
DOWNLOAD

REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
DOWNLOAD










Requests Suspended till JB ROM is released!

root your phone before making the ota update and the root will remain.

do not use kies to update the phone.
 
Last edited:
  • Like
Reactions: tsigpan, joseyash, headtotoe and 35 others
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
GT-I9070P (NFC Version) Rooted Firmwares:



REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
DOWNLOAD

REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
DOWNLOAD

REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
DOWNLOAD

REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
DOWNLOAD

REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
DOWNLOAD

REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
DOWNLOAD

REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
DOWNLOAD

REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
DOWNLOAD


 
Last edited:
  • Like
Reactions: pnuda, matzis, an8rwpofagos and 14 others
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
vieri_firman said:
Request for DXLD1....
Thanks...;)

Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse

could you especify the firmware region? there are 8 DXLD1 firmwares.
http://samsung-updates.com/device/?id=GT-I9070


CallMeVentus said:
I believe this will work for the GT-i9070P....you just added the su binary and Superuser.apk into the .tar right ? I wanna do it for the GT-i9070P ;)
Click to expand...
Click to collapse

superuser.apk can be installed from google play store.
I could add i9070P to the list later.
but I'm uploading the ones I already made for I9070
 
Last edited:
  • Like
Reactions: lovelov22, acidburn_2980, dafreak_2 and 2 others
vieri_firman

vieri_firman

Senior Member
Jun 23, 2012
68
7
Indonesia
Sorry...
Region (XSE)
PDA :I9070DXLD1
CSC : I9070OLBLD1
Thanks a lot...

Sent from my GT-I9070 using xda premium
 
Last edited:
V

vamvax

Member
Mar 3, 2010
17
2
request i9070 eur

please provide files for i9070xxld3 eur (greece)
 
Last edited:
undaclazz

undaclazz

Senior Member
Oct 14, 2011
229
70
Yogyakarta
Finally... Can root without increase binary counter... Greeaaattt :D

Btw, do we really need kies if we have installed usb driver on our computer?
 
Last edited:
CallMeVentus

CallMeVentus

Senior Member
Jul 25, 2011
10,091
2,840
Singapore
www.youtube.com
Motorola Defy
Samsung Galaxy S Advance I9070
D

Dhakkon

Senior Member
May 17, 2012
77
6
Could you root: I9070VSLD I9070TFGLD1?

I forgot to ask: this includes TWRP recovery, doesn't it?
 
Last edited:
Shaaan

Shaaan

Inactive Recognized Developer
May 6, 2011
2,387
4,718
Mumbai
diego-ch said:
ROOTED FIRMWARES:


REGION: INU | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD

REGION: TTT | PDA: I9070UBLD1 | CSC: I9070UUBLC1
DOWNLOAD

REGION: OXA | PDA: I9070XXLD1 | CSC: I9070OXALD1
DOWNLOAD

REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
DOWNLOAD






If you need another firmware,
make a request and I'll root it when I have some time
Click to expand...
Click to collapse

Can you please tell the method of how to do it?
Just push the su binary in the zip and flash?
 
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
Dhakkon said:
Could you root: I9070VSLD I9070TFGLD1?

I forgot to ask: this includes TWRP recovery, doesn't it?
Click to expand...
Click to collapse

yep. but I need some time to download, root and then upload it,
and there's already a few firmwares on the list.

this doesnt include twrp recovery.
you can flash TWRP after rooting you phone by using the DD method.
your counter wont increase unless you flash a kernel via odin ( my TWRP Kernel, CoCore Kernel or any other kernel )



Shaaan said:
Can you please tell the method of how to do it?
Just push the su binary in the zip and flash?
Click to expand...
Click to collapse

It's on the first post.
This is meant to be flashed over your Stock ROM using odin.
 
Last edited:
  • Like
Reactions: Marino Pacheco and vieri_firman
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
  • Like
Reactions: Marino Pacheco and CallMeVentus
D

Dhakkon

Senior Member
May 17, 2012
77
6
diego-ch said:
yep. but I need some time to download, root and then upload it,
and there's already a few firmwares on the list.

this doesnt include twrp recovery.
you can flash TWRP after rooting you phone by using the DD method.
your counter wont increase unless you flash a kernel via odin ( my TWRP Kernel, CoCore Kernel or any other kernel )
Click to expand...
Click to collapse

Thanks, i'll wait as much as you need.

Regarding the DD method:

3. Start adb shell (do you mean terminal emulator?)

4. Do the following commands:
Code:
$ su
# dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
# reboot

5. Wait for the device to reboot.
 
Shaaan

Shaaan

Inactive Recognized Developer
May 6, 2011
2,387
4,718
Mumbai
diego-ch said:
yep. but I need some time to download, root and then upload it,
and there's already a few firmwares on the list.

this doesnt include twrp recovery.
you can flash TWRP after rooting you phone by using the DD method.
your counter wont increase unless you flash a kernel via odin ( my TWRP Kernel, CoCore Kernel or any other kernel )





It's on the first post.
This is meant to be flashed over your Stock ROM using odin.
Click to expand...
Click to collapse

Not that.
I meant how to make a rooted file
 
D

diego-ch

Senior Member
Aug 12, 2010
403
3,048
João Pessoa
Dhakkon said:
Thanks, i'll wait as much as you need.

Regarding the DD method:

3. Start adb shell (do you mean terminal emulator?)

4. Do the following commands:
Code:
$ su
# dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
# reboot

5. Wait for the device to reboot.
Click to expand...
Click to collapse
adb shell is the command line tool that you use to execute commands on any android device. ( it runs on windows/mac/linux )
but yes.. you can do that with terminal emulator app


Shaaan said:
Not that.
I meant how to make a rooted file
Click to expand...
Click to collapse
another user asked this and I answered him a few posts back.
 
  • Like
Reactions: Marino Pacheco
You must log in or register to reply here.

Similar threads

qzem
  • Locked
[HOW TO] Samsung Galaxy S I9070 Advance ROOT for most firmwares!
Replies
806
Views
703K
Jonny
Jonny
qzem
[For DEV] Samsung Galaxy S I9070 Advance kernel & platform source code
Replies
1K
Views
367K
shut_down
shut_down
arkhan11
  • Locked
[INDEX][upd OCT 7, 2013]Galaxy S Advance i9070 / i9070P
Replies
357
Views
369K
Jonny
Jonny
D
[GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance
Replies
294
Views
269K
J
jfjkeuren
V
  • Sticky
[LIST]All Stock Frimwares - Galaxy S Advance
Replies
169
Views
218K
Toan-5
Toan-5

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 87
    D
    diego-ch
    DISCLAIMER:


    I'm NOT responsible for any damage you cause to your phone.
    Be sure to follow the steps correctly.    ​



    REQUIREMENTS:
    • Windows

    • Samsung KIES and all drivers installed.

    • ODIN for flashing the firmware.



    HOW TO ROOT:
    1. Download the Pre-Rooted firmware that matches the firmware your using.


    2. Extract the RAR file, you will end up with a folder with two files in it.
      SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


    3. Close any KIES application that might be open.


    4. Open ODIN.


    5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


    6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


    7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
      Do NOT select "Repartition"


    8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


    9. Plug your phone usb cable to your computer.
      If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


    10. Click the "START" button and wait for it to finish.
      Do NOT unplug the usb cable before ODIN finishes its job.


      If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
      Then you can remove the usb cable.
      Your device will reboot in Recovery Mode and will finish the installation.
      When it finishes, it will reboot and start the Android System.



    11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





    That's it! :good:
    Now, enjoy your rooted Galaxy S Advance! :cool:
    You can go back to Download Mode to check that your Binary Counter hasn't increased.



    DONATIONS:
    Consider making a donation,
    It helps support developers so they can keep doing a great job!
    Donate via Paypal :good:
    View
    38
    D
    diego-ch
    GT-I9070 Rooted Firmwares:


    REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
    DOWNLOAD

    REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
    DOWNLOAD

    REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
    DOWNLOAD

    REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
    DOWNLOAD

    REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
    DOWNLOAD

    REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
    DOWNLOAD

    REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
    DOWNLOAD

    REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
    DOWNLOAD

    REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
    DOWNLOAD

    REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
    DOWNLOAD

    REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
    DOWNLOAD

    REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
    DOWNLOAD

    REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
    DOWNLOAD

    REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
    DOWNLOAD

    REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
    DOWNLOAD

    REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
    DOWNLOAD

    REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
    DOWNLOAD

    REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
    DOWNLOAD

    REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
    DOWNLOAD

    REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
    DOWNLOAD

    REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
    DOWNLOAD










    Requests Suspended till JB ROM is released!

    root your phone before making the ota update and the root will remain.

    do not use kies to update the phone.
    View
    17
    D
    diego-ch
    GT-I9070P (NFC Version) Rooted Firmwares:



    REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
    DOWNLOAD

    REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
    DOWNLOAD

    REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
    DOWNLOAD

    REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
    DOWNLOAD

    REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
    DOWNLOAD

    REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
    DOWNLOAD

    REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
    DOWNLOAD


    View
    8
    D
    diego-ch
    I did root more firmwares,
    I just need some time to upload them.
    I'll upload them tonight.
    View
    7
    D
    diego-ch
    okay guys,
    now I have 10 requests for the I9070 and 7 for the I9070P (that's around 5gb for me to download and then upload)
    but I'll start uploading them today

    Code: 
    I9070
1.  XSE DXLD1 LBLD1
2.  EUR XXLD3
3.  CNX XXLF4 CNXLC1
4.  CHO UBLD1 CHOLD4
5.  XTC DXLD1 OLBLD1
6.  TRA XXLD3
7.  XME DXLD1 OLBLD1
8.  INU DDLJ1 ODDLJ1
9.  PRT XXLF4 PRTLF1
10. TCE UBLD1

+ 7 more I9070P firmwares

    please wait for me to upload these before making more requests



    ferrettijr said:
    Alright. Thanks so much.

    Certo, muito obrigado.:laugh:
    Click to expand...
    Click to collapse

    CHO reuploaded. please test the new link.
    View

New posts