[MOD][AOSP - RR - CR][8.1]Enable Quick Charge 2.0 on AOSP

Search This thread

V4LKyR

Senior Member
Jun 6, 2014
610
139
Hello all.

With the hvdcp module from stock .291 rom, I was able to enable Quick Charge 2.0 on latest RR (Resurrection Remix) rom. Our phones will now charge at least 2 times faster.

Please note that I only tested this with latest RR rom but it should work with all AOSP 8.1 roms... (I think) Also, I tested it with Xperia Z2. (sirius)

The charging current is limited to 2.1 Amps (2100 mA)

--- Update 13/05/18 ---

- Kernel is updated with latest source (video recording should work now) and I have created a unified flashable zip for easy use.

You need to do 3 things:

1- Flash the kernel image I compiled via fastboot. (fastboot flash boot rr_qc_enabled_kernel.img)
2- Flash rr_qc.zip via TWRP to install hvdcp module. (I made it with AFZC)
3- Clean/wipe cache and dalvik via TWRP.

Kernel Features:

-Compiled with Google's prebuilt toolchain.
-Quick Charge 2.0 enabled.
-Compiled with -Ofast optimization.
-Intelliplug & MSM MPDecision hotplug enabled.
-Total of 13 different TCP Congestion Algorithms.
-Added zzmoove CPU governor.

IMPORTANT NOTE: Dear all, this is a kernel you are flashing, not some basic mod. A whole new KERNEL. Therefore, it's the best to do a clean install, with wiping everything (dalvik, cache, data, system). This is important to get the correct results.

Regards.

Credits:
@opendata
@shaiya87
@Cygmon0
@override999
AFZC team @Nikhil
 

Attachments

  • rr_qc.zip
    6.9 MB · Views: 4,349
Last edited:

wadoo24

Senior Member
Apr 29, 2018
150
48
Thank you men you are the best !! :D
I want to ask you , if i use it with original charger i will feel the difernece? It is safe to use the fast charge all the time ? There is a way to chose betwen fast and slow charge ?
 

koraymers

Senior Member
Jun 10, 2017
364
86
Will Zip file work on Carbon 8.1
Moreover will you build governor added carbon .img file too
 
Last edited:

ryan.vandalz

Senior Member
Sep 15, 2013
209
87
Tested,keep it up bro
 

Attachments

  • Screenshot_Trebuchet_20180501-095906.jpg
    Screenshot_Trebuchet_20180501-095906.jpg
    78.3 KB · Views: 2,411
Last edited:

V4LKyR

Senior Member
Jun 6, 2014
610
139
Thank you men you are the best !! :D
I want to ask you , if i use it with original charger i will feel the difernece? It is safe to use the fast charge all the time ? There is a way to chose betwen fast and slow charge ?

There's no way to change between slow and fast charge... Yes, it's safe.

Will Zip file work on Carbon 8.1
Moreover will you build governor added carbon .img file too

This kernel should work with Carbon rom too... you can try. If it doesn't boot up, you can flash carbon kernel again.

Thanks for the MOD BUT ,
i'm still getting " Slow Charging "
PS using Magnetic Cable .

You are required to use USB port because that's how Quick Charge system works. Also, you need to use a certified Quick Charge adapter.
 
G

GuestK0014

Guest
Working well on Carbon rom latest weekly.

Sent from my Xperia Z2 using XDA Labs
 

Attachments

  • Screenshot_Ampere_20180501-125232.png
    Screenshot_Ampere_20180501-125232.png
    168.1 KB · Views: 1,900

TepaC

Senior Member
Oct 6, 2014
76
16
Zrenjanin
Not working on this version of rom. Plus WiFi cant be turned on. Luckily I created backup of boot image.
 

Attachments

  • Screenshot_20180501-122818.png
    Screenshot_20180501-122818.png
    109.8 KB · Views: 1,248

fribriz

Senior Member
Jan 26, 2012
143
20
Singapore
Will it work with Z2 tablet (Castor)?
Many thanks for your hard work.

Sent from my Xperia Z1 using Tapatalk
 

V4LKyR

Senior Member
Jun 6, 2014
610
139
Not working on this version of rom. Plus WiFi cant be turned on. Luckily I created backup of boot image.

It shouldn't be that way... Something else must be wrong at your end.

What a success!!

Is it gonna work on Carbon ROM with Xperia UI (XUN 2.5)?
I mean this one: https://xdaforums.com/xperia-z2/development/rom-los-xperia-ui-z2-t3654887

Thanks a lot.

I don't know, you should try... Someone else said that it works fine with Carbon ROM. You can always flash the stock kernel again if any problems occur.

Where is your kernel source code?

Thanks bro.

This not really a development, just some basic mod. I might develop a custom kernel as well... If you guys would like that.

Will it work with Z2 tablet (Castor)?
Many thanks for your hard work.

Sent from my Xperia Z1 using Tapatalk

No, this is only for Xperia Z2 phone. D6503, Sirius.

Is there luck to have one for rr 7.1.2
Thanks for your good job

Sure, if there is a kernel source, I can compile a custom kernel supporting QC 2.0 for you.
 

Samir2298

Senior Member
Apr 3, 2015
269
27
I have the original charger of z5 premium. Would that work for fast charging z2? and would it be safe to use it?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    Hello all.

    With the hvdcp module from stock .291 rom, I was able to enable Quick Charge 2.0 on latest RR (Resurrection Remix) rom. Our phones will now charge at least 2 times faster.

    Please note that I only tested this with latest RR rom but it should work with all AOSP 8.1 roms... (I think) Also, I tested it with Xperia Z2. (sirius)

    The charging current is limited to 2.1 Amps (2100 mA)

    --- Update 13/05/18 ---

    - Kernel is updated with latest source (video recording should work now) and I have created a unified flashable zip for easy use.

    You need to do 3 things:

    1- Flash the kernel image I compiled via fastboot. (fastboot flash boot rr_qc_enabled_kernel.img)
    2- Flash rr_qc.zip via TWRP to install hvdcp module. (I made it with AFZC)
    3- Clean/wipe cache and dalvik via TWRP.

    Kernel Features:

    -Compiled with Google's prebuilt toolchain.
    -Quick Charge 2.0 enabled.
    -Compiled with -Ofast optimization.
    -Intelliplug & MSM MPDecision hotplug enabled.
    -Total of 13 different TCP Congestion Algorithms.
    -Added zzmoove CPU governor.

    IMPORTANT NOTE: Dear all, this is a kernel you are flashing, not some basic mod. A whole new KERNEL. Therefore, it's the best to do a clean install, with wiping everything (dalvik, cache, data, system). This is important to get the correct results.

    Regards.

    Credits:
    @opendata
    @shaiya87
    @Cygmon0
    @override999
    AFZC team @Nikhil
    12
    Whole new kernel is coming very soon.
    8
    Dear all,

    I'm planning to release a fully customized, upstreamed OREO kernel sometime soon. Yes, it will support QC of course. Please stay tuned.

    Regards.
    6
    That's because AICP is using a different kernel source.
    can you please share what you did to enable it ? then i can include it in carbon builds :D
    3
    Not working on this version of rom. Plus WiFi cant be turned on. Luckily I created backup of boot image.

    It shouldn't be that way... Something else must be wrong at your end.

    What a success!!

    Is it gonna work on Carbon ROM with Xperia UI (XUN 2.5)?
    I mean this one: https://xdaforums.com/xperia-z2/development/rom-los-xperia-ui-z2-t3654887

    Thanks a lot.

    I don't know, you should try... Someone else said that it works fine with Carbon ROM. You can always flash the stock kernel again if any problems occur.

    Where is your kernel source code?

    Thanks bro.

    This not really a development, just some basic mod. I might develop a custom kernel as well... If you guys would like that.

    Will it work with Z2 tablet (Castor)?
    Many thanks for your hard work.

    Sent from my Xperia Z1 using Tapatalk

    No, this is only for Xperia Z2 phone. D6503, Sirius.

    Is there luck to have one for rr 7.1.2
    Thanks for your good job

    Sure, if there is a kernel source, I can compile a custom kernel supporting QC 2.0 for you.