S4 i9505 update soft problem

Search This thread
By:
Advanced…
G

grofudaniel

Member
Mar 4, 2009
32
3
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:
<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
Click to expand...
Click to collapse

Then i tried to install DBT 4.4.2 and got stuck with this:

<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
Click to expand...
Click to collapse

What should i do next except going to service?

THX in advance
 
S

speedwayfan75

Guest
grofudaniel said:
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:


Then i tried to install DBT 4.4.2 and got stuck with this:



What should i do next except going to service?

THX in advance
Click to expand...
Click to collapse

How did you start your phone in download mode? Via power menu or did you hold volume down and power button?
Very important is:
use only the two button combo.
In Odin untick autoreboot.
Start windows task manager and stop all Kies processes.
Use only the original Samsung USB cable.
If all that not works try another USB port.
And do not remove your phone from PC before Odin says PASS.
When Odin shows pass, remove the phone and hold the power button until it reboots.
 
G

grofudaniel

Member
Mar 4, 2009
32
3
I tried different ports with different softs and different data cables but no results.
Instead, i tried install nee from my laptop and it worked from the first time.
So, i supose it's from my pc's drivers.
 
Last edited:
You must log in or register to reply here.

Similar threads

Rhoban
  • Sticky
[HELP THREAD] Galaxy S4 | Ask any question | Noob friendly.
Replies
21K
Views
1M
No_Location
No_Location
Hendrickson
S4 Screen cracked in front jeans pocket! Galaxy S4 is very weak!
Replies
1K
Views
400K
audit13
audit13
C
  • Locked
Wonted:Samsung S4 Duos I9502 Root+cooked rom
Replies
905
Views
245K
xHausx
xHausx
Sys. Developer
My Galaxy S4 GT-I9500 Overheating
Replies
584
Views
228K
O
openmovies
Katkoot_cena
[Q] Wifi problem in Galaxy S4 (I9505)
Replies
41
Views
98K
M
mantasm1

New posts