[Android 7.0] [Nougat] Moto G4 Plus XT[1640-44] ATHENE NPJ25.93-11 FASTBOOT

Search This thread

sakhura

Senior Member
Dec 17, 2014
212
263
28
Muscat, Oman
Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.

For the Latest Update NPJ25.93-14 FASTBOOT Refer This thread https://xdaforums.com/moto-g4-plus/...e-npj25-93-t3549369/post70843323#post70843323

Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644][Android 7.0] [Nougat] [Official] Install Nougat by official fastboot. Build NPJ25.93-11

Requirements:

1. Originally shared by [Lenovo Forums](http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/)

2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
3. Install Minimal ADB and Fastboot = https://xdaforums.com/showthread.php?t=2317790

4. Download Flashable Zip : https://cloud.mail.ru/public/CKF3/AWVREk6s9 Special Thanks to @zhene4ka.by :good:


With the help of the installation program: RSDLite6.2.4.zip

Download the program to install and set up.
Download and unpack the firmware.
Run the program.
Click on the button with three dots
http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2F1.jpg.3c365c419095599d06a27a4fad24c2b8.jpg
next to the Start
Select flashall.xml - this version of the firmware will save the user data in your apparate.NPJ25.93-11.jpg
http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2FNPJ25.93-11.jpg.06e455820195ab03a4c287c44ab067e6.jpg

Reboot your phone into fastboot mode (using the command adb reboot bootloader or turn off the phone we press the volume down + power button).
Connect your phone to a PC. The program should determine the phone.
We press the Start button and wait until the end of the firmware until the phone restarts.

Firmware via FASTBOOT:

Download the rar file and unzip it.
Extract all the files to your fasboot folder.
Restart the Moto G4 in fastboot mode.
Make sure that usb debugging is on.
Connect the Phone in fastboot mode to the computer

Run the "flashall.bat" script that is inside the folder that is created when you unzip the file.(If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below)
http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2F586775727fda5_NPJ25.93-11-1.jpg.2d943dfc0262eaff651e9dd4912fc154.jpg


Wait for the process to finish and restart the device.
Then, the device will start with a new bootanimation, it may take a while but it does not format the user data use the modified "flashall.bat" script if you want to wipe data and cache


NOTE:
The stock "flashall.bat" script in the firmware does not wipe data or cache this is good for stock locked bootloader or people who are stuck on soak test with a locked bootloader

If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below just copy and replace it in the files and then use the modified "flashall.bat" script or else all your data and cache from previous custom rom will be carried forward to Stock and youll just have force closes.

Happy new year start with Android 7 official!

HIT THANKS IF I HELPED YOU !


FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
 

Attachments

  • Screenshot_20170104-101352.png
    Screenshot_20170104-101352.png
    101.5 KB · Views: 14,683
  • Screenshot_20170104-101356.png
    Screenshot_20170104-101356.png
    121 KB · Views: 14,569
  • Screenshot_20170109-224029.png
    Screenshot_20170109-224029.png
    103.8 KB · Views: 6,806
Last edited:

rocksolidnsg

Member
Mar 8, 2012
6
1
hi,

thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.
 
  • Like
Reactions: mahesvr

lukasth

Member
Dec 12, 2016
14
1
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected


I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
 

Attachments

  • dfdfdfdfdfdf.png
    dfdfdfdfdfdf.png
    15.1 KB · Views: 836

sakhura

Senior Member
Dec 17, 2014
212
263
28
Muscat, Oman
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
Have you copied all the files in the zip into the fastboot folder including the folders you have to copy all the files including every folder in the zip into fastboot and then it'll work.
 
Last edited:

rmvgomes

New member
Mar 1, 2011
2
1
Mexico City
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:
 
  • Like
Reactions: JaviLerma

daeshawn

Senior Member
Mar 5, 2008
990
76
Toronto
Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?
 
Last edited:

rmvgomes

New member
Mar 1, 2011
2
1
Mexico City
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:

**UPDATE**

After installing all apps i rebooted the phone and it got freeze/stuck on the bootloader unlock message and in the ID line it says ID: bad key

Eventually it load up the system, like after 5 to 10min of bootloader unlock freeze/stuck :rolleyes:

Any ideas?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 50
    Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.

    For the Latest Update NPJ25.93-14 FASTBOOT Refer This thread https://xdaforums.com/moto-g4-plus/...e-npj25-93-t3549369/post70843323#post70843323

    Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644][Android 7.0] [Nougat] [Official] Install Nougat by official fastboot. Build NPJ25.93-11

    Requirements:

    1. Originally shared by [Lenovo Forums](http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/)

    2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
    3. Install Minimal ADB and Fastboot = https://xdaforums.com/showthread.php?t=2317790

    4. Download Flashable Zip : https://cloud.mail.ru/public/CKF3/AWVREk6s9 Special Thanks to @zhene4ka.by :good:


    With the help of the installation program: RSDLite6.2.4.zip

    Download the program to install and set up.
    Download and unpack the firmware.
    Run the program.
    Click on the button with three dots
    http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2F1.jpg.3c365c419095599d06a27a4fad24c2b8.jpg
    next to the Start
    Select flashall.xml - this version of the firmware will save the user data in your apparate.NPJ25.93-11.jpg
    http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2FNPJ25.93-11.jpg.06e455820195ab03a4c287c44ab067e6.jpg

    Reboot your phone into fastboot mode (using the command adb reboot bootloader or turn off the phone we press the volume down + power button).
    Connect your phone to a PC. The program should determine the phone.
    We press the Start button and wait until the end of the firmware until the phone restarts.

    Firmware via FASTBOOT:

    Download the rar file and unzip it.
    Extract all the files to your fasboot folder.
    Restart the Moto G4 in fastboot mode.
    Make sure that usb debugging is on.
    Connect the Phone in fastboot mode to the computer

    Run the "flashall.bat" script that is inside the folder that is created when you unzip the file.(If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below)
    http%3A%2F%2Flenovo-forums.ru%2Fuploads%2Fmonthly_2016_12%2F586775727fda5_NPJ25.93-11-1.jpg.2d943dfc0262eaff651e9dd4912fc154.jpg


    Wait for the process to finish and restart the device.
    Then, the device will start with a new bootanimation, it may take a while but it does not format the user data use the modified "flashall.bat" script if you want to wipe data and cache


    NOTE:
    The stock "flashall.bat" script in the firmware does not wipe data or cache this is good for stock locked bootloader or people who are stuck on soak test with a locked bootloader

    If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below just copy and replace it in the files and then use the modified "flashall.bat" script or else all your data and cache from previous custom rom will be carried forward to Stock and youll just have force closes.

    Happy new year start with Android 7 official!

    HIT THANKS IF I HELPED YOU !


    FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
    3
    https://drive.google.com/open?id=0B6p8Tmv1c70uUnU4RTdzbC1TTWs
    Here's the Google drive mirror,I unpacked,added google's new adb and fastboot tools and repacked it.
    3
    I have an xt1641 with MPJ24.139-23.1 this firm works fine on my device?
    Yes it will. I was running that on mine. I used the fastboot method. Procedure is nice and smooth.

    The "flashall.bat" takes care of everything. Lol my 2 yr old daughter could do it.

    Sent from my Moto G (4) using XDA-Developers Legacy app
    2
    This works with XT1641 RETLA (Latin American)?
    It does work with xt1641
    2
    It does work with xt1641

    I tried this on my XT1644 USA model; from stock. It works perfectly also