[APP][5.0+]Connection Stabilizer Booster - 2G, 3G, 4G LTE, 5G, WiFi

Search This thread

comzone

Member
Mar 27, 2014
19
7
How this app works? It turns off my mobile data when i use it,, :( and seems my connection gettinf slower. No offense. I just dont get it,, how to use it correctly

Sent from my GT-S7500 using XDA Premium 4 mobile app
 

ms.goofy

Senior Member
Apr 25, 2013
122
75
How this app works? It turns off my mobile data when i use it,, :( and seems my connection gettinf slower. No offense. I just dont get it,, how to use it correctly

Sent from my GT-S7500 using XDA Premium 4 mobile app

What is the exact problem with your connection that you are trying to fix with this app? What type of connection are you using? GPRS, EDGE, 3G, LTE, other? Answer these two question and I will tell you how to correctly use the app.

The app turns your mobile data off? The app actually gets it connected when your connection drops, provided Active Reconnect is enabled. However, when Active Keep Alive is on, the app reset your connection if it determined it to be frozen (on but no data transfer possible). Is this what you are talking about? In this case it will connect again immediately so that your connection gets working again. If you don't want this, you can turn off Reset on Failure form Active Keep Alive settings. If you think your connection is getting slower you probably need to adjust ping interval.

However, the speed ultimately depends on your type of connection and your carrier. The app does all the possible tricks and optimizations to make life easier with a bad network or carrier. You can notice the effect in most cases but sometimes, the problem may be too bad to produce significant results. Anyway, I will try to figure it out if you give me details and specifics.
 
Last edited:

mbmb8989

Senior Member
Jun 7, 2013
156
13
Tunis
Nice app! I want to report a FC (may be related to some functionality in xposed framework) on the application every time i try to enable the "active keep alive" :(
Which log should i provide? Logcat or the stacktrace (from the force close report) ?

Envoyé de mon GT-I9100 en utilisant Tapatalk

Edit : just to say that i desactived fast dormancy (with an app found on xda) (will provide the link later have to work now :D)
 
Last edited:

dmillerzx

Senior Member
Feb 4, 2010
187
116
Baltimore
Seems to be working well so far, I can already tell though that this is going to cause some battery drain. Hopefully the dev will continue to optimize so that any battery drain isn't noticeable. I changed my ping interval to 2 minutes. Might change it to 5. - Figured this was a good first start for optimizing

We'll see how it goes!

Thanks for your hard work! Awesome work.
 
  • Like
Reactions: schwartz.matthew.e

ms.goofy

Senior Member
Apr 25, 2013
122
75
Nice app! I want to report a FC (may be related to some functionality in xposed framework) on the application every time i try to enable the "active keep alive" :(
Which log should i provide? Logcat or the stacktrace (from the force close report) ?

Envoyé de mon GT-I9100 en utilisant Tapatalk

Edit : just to say that i desactived fast dormancy (with an app found on xda) (will provide the link later have to work now :D)

Thank you. This seems to be an unusual issue but will be fixed. Please attach logcat. :good:
 

rkhighlight

Senior Member
Mar 21, 2013
53
6
I'm experiencing some weird problems with my provider (vodafone) in my nearby local town (germany). My smartphone has excellent reception (H+, I don't use 4G/LTE) but just doesn't send data through it. It works fine for like 30 seconds, then does absolutely nothing for 2-30 minutes. Really terrible, since my spotify premium becomes useless there.

I'm quoting myself in order to remind you of my original comment and issues with 3G internet connection. You asked for a further description and I just want to give you that. Sorry, that it took so long but I observed it the last two weeks in order to test it several times and confirm the characteristics to be significant and not some kind of placebo.

From what I've experienced, the situation definitely improved a lot! Though, I can't tell you if this relates to the usage of your app or it might be a general improvement of my carrier. Sadly, I still get no constant internet connection even though connection seems to be stable and reception is great. Things that I can tell you:

- Turning airplane mode on and off solves this problem
- Switching between 2G and 3G solves this, too.
- It only occurs on 3G. Everything works just fine on 2G.
- Switching between airplane mode and 2G/3G solves it but just for some minutes. Sometimes it only lasts some seconds.
- I'm not sure but as far as I observed, the connection never interrupts while there is a data exchange. I can download big files (>500 mb) or constantly stream music without beeing affected.
- Active Reconnection is always activated. Active Keep Alive is deactivated most of the time since it doesn't prevent the appearance of the issue and then just reports Ping Failed.
- Losing mobile connection sometimes causes your app to force close in background.

I hope this might help you. In fact I don't know if the improvements come from your app but I still want to thank you for your efforts.
 
  • Like
Reactions: ms.goofy

ms.goofy

Senior Member
Apr 25, 2013
122
75
Thank you!! Best app!!
Welcome!. Seems like your only post. Did you register only to say thank you? Thanks a lot.
You can also use the thanks button. :)

Seems to be working well so far, I can already tell though that this is going to cause some battery drain. Hopefully the dev will continue to optimize so that any battery drain isn't noticeable. I changed my ping interval to 2 minutes. Might change it to 5. - Figured this was a good first start for optimizing

We'll see how it goes!

Thanks for your hard work! Awesome work.

Thank you for your feedback. Battery drain is low and will become lower with upcoming updates, especially for higher ping intervals.

You're welcome. :)
 

ms.goofy

Senior Member
Apr 25, 2013
122
75
I'm quoting myself in order to remind you of my original comment and issues with 3G internet connection. You asked for a further description and I just want to give you that. Sorry, that it took so long but I observed it the last two weeks in order to test it several times and confirm the characteristics to be significant and not some kind of placebo.

From what I've experienced, the situation definitely improved a lot! Though, I can't tell you if this relates to the usage of your app or it might be a general improvement of my carrier. Sadly, I still get no constant internet connection even though connection seems to be stable and reception is great. Things that I can tell you:

- Turning airplane mode on and off solves this problem
- Switching between 2G and 3G solves this, too.
- It only occurs on 3G. Everything works just fine on 2G.
- Switching between airplane mode and 2G/3G solves it but just for some minutes. Sometimes it only lasts some seconds.
- I'm not sure but as far as I observed, the connection never interrupts while there is a data exchange. I can download big files (>500 mb) or constantly stream music without beeing affected.
- Active Reconnection is always activated. Active Keep Alive is deactivated most of the time since it doesn't prevent the appearance of the issue and then just reports Ping Failed.
- Losing mobile connection sometimes causes your app to force close in background.

I hope this might help you. In fact I don't know if the improvements come from your app but I still want to thank you for your efforts.

Thank you for the information.
Are you using the latest version with "reset on failure"?
And you didn't mention whether switching data on and off solves your problem. Please clear it.

Based on the valuable information you have provided, future version of the app will attempt to fix your problem.
 

spupuz

Senior Member
Feb 2, 2008
1,847
267
46
Milan
i do always switch to 2g once screen of and switch off data when in wifi, does this app can be useful also for me for boosting mobile data?

anyway the UI is UGLY.
 

iapps

Member
May 8, 2014
45
22
Perhaps allow the user to choose what ip/site to ping for the keep alive? It could then both be used as a keep alive AND possibly send an alert if a site is offline or at lease the notification might alert them.

I'd also appreciate a method of having it start with both the connection stabalizing AND the ping enabled either via settings or by tracking state of last time it was ran?

I second that feature request. It is quite useful for those of us owning several websites which we have to keep an eye on. Your app can double as both keeping the connection active and notifying the user if it gets no response to pings for some time. Very useful app!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 53
    Dashboard.png
    Connecting.png

    This is is for those people who face connectivity issues with their 2G, 3G, 4G LTE, 5G data or WiFI connection.
    It can address disconnection and other common connectivity issues.


    Loaded with lots of powerful features, this app delivers a stable mobile internet connectivity.

    ★★★ Active Reconnect ★★★
    Does your device often lose data signal and is unable to reconnect even though network is available? Do you miss out important chats, IMs and emails until you turn data connection on and off, maybe multiple times to get reconnected? That is a known issue that affects many people. It can be caused by handset or carrier issues.
    Active Reconnect automatically reconnects your 2G GPRS, 3G, 4G LTE or 5G internet connection as soon as it gets disconnected and thus keeps the data connection active at all times.
    When activated, this feature actively monitors and immediately re-establishes dropped connections, using muscle if required. This is particularly useful if android's built in system fails to connect you to the network. The monitoring process does not cause any load on your device's resources as it is intelligently invoked only when required.


    ★★★ Active Keep Alive ★★★
    Does your wireless carrier disconnects your 2G, 3G, 4G or 5G data connection after a certain period of inactivity? Or is there no data transfer even when connection is live?
    Active Keep Alive along with Reset on Failure keeps your connection alive in such cases and also helps in keeping the traffic flowing between your phone and your ISP's servers. It also optimizes TCP/IP parameters if required to give you the best possible internet experience. The network assigns a higher priority to your device and this results in significant improvement in network performance, especially if resources on the network are under strain.


    ★★★ Force Connect ★★★
    Uses tricks and tweaks to establish internet connection and attains connectivity even on congested networks.

    Highly customizable and elegant design with animations, transparency, bells, gongs and whistles to deliver best user experience.
    This app can fix 2G, 3G, 4G and 5G internet connection problems on service providers like T-Mobile, Verizon, Boost, Vodafone, Airtel, Jio, Telkomsel and any other troublesome carrier!

    USAGE INSTRUCTIONS:
    → If you are experiencing difficulty in establishing connection to the internet over the mobile network, just press the Force Connect button on the dashboard to try forcing the connection for once.

    → If you are facing automatic disconnection problem then activate the Active Reconnect module. It will automatically detect connection drops and actively reconnect the connection, using force connect if required.

    → If your carrier disconnects you from the network following a particular period of inactivity, activate the Active Keep Alive module. You can adjust the ping interval from the Active Keep Alive settings to be just lower than your network's inactivity timeout period.

    → If you are facing any other problem with you connection, like no data being transmitted even when connected, you can just activate the Active Keep Alive with default settings. Its pinging action is known to work wonders and solve or reduce the intensity of many congestion related network issues. It can also detect and reset frozen connections.


    ☆ If you are facing any unique connectivity issues or have suggestion for us, we are all ears. Just drop us an email.

    IMPORTANT INFORMATION:
    → When Active Reconnect is enabled, you cannot turn off the mobile data connection directly from your device.
    To disconnect, press the data setting ON OFF button on the app's dashboard or deactivate Active Reconnect before turning off mobile data from android settings.



    Reset on failure is useful for those situations wherein data transmission stops but the connection still exists. It resets the connection to restore normal operation. This feature is embedded with the Keep Alive module and can be turned on or off using the respective setting.

    Active Reconnect.png
    Active Keep Alive.png
    Help.png
    Settings.png
    Themes.png

    Landscape.png


    Update Available: Version 3.0.3 April 28, 2022

    ☆ Upgraded UI and core functionality.
    ☆ Stability and performance upgrades.
    ☆ More theme options.
    ☆ Upgraded purchase experience.
    ☆ Alternative method for enabling Active Reconnect for non-root users.
    ☆ Added French translation.

    Minimum android version supported is now Android 5.0.


    <Details of all versions not added here.>

    Version 2.4.3 :) Jan 2, 2019
    ☆ Bug fixes
    ☆ Support for Android 9 Pie.
    ☆ Added Indonesian translation.
    Minimum android version supported is now Android 4.0.


    Version 2.2.0 :) April 19, 2017
    ☆ New Features:
    ☛ WIDGETS!- Pro Version users get access to widgets for Active Keep Alive, Active Reconnect and Force Connect
    ☛ New improved algorithms with faster and better reconnection capability
    ☆ Numerous bug fixes
    ☆ Multiple enhancements for performance, speed and stability
    ☆ Better support for newer android versions
    ☆ You can refresh all radios using force connect if Refresh Radio is enabled in Active Reconnect settings
    ☆ Active Keep Alive notification is hidden from lock screen

    Version 2.0.1 :) April 1, 2015
    ☆ New Features:
    ☛ Refresh Radio - Refresh the cell radio to restore data connection. On lollipop (root), this will toggle the airplane mode.
    ☛ Reset Radio - Reset the radio when resetting stalled connection
    ☆ Minimum wait time for Active Reconnect decreased to 6 secs
    ☆ Bug fixes and enhancements

    Version 1.9.4 :) March 4, 2015

    ☆ Full support for Android 5 (lollipop)
    ☆ Bug fixes & enhancements

    Version 1.9.0:) Feb 6, 2015

    ☆ Bug fixes
    ☆ Ad-free option
    ☆ Smart ping
    ☆ Numerous enhancements

    Version 1.8.1:) Dec 16, 2014
    ☆ Fixed crash at launch on some devices

    v1.8.0
    ☆ Numerous bug fixes and enhancements
    ☆ Added Russian translation
    ☆ Added alternate ping mechanism
    ☆ Improved performance and intelligence

    v1.5.0
    ☆ Power saver mode - sleep when screen is off
    ☆ More informative notification icons
    ☆ Customizable reconnection wait intervals
    ☆ Added German translation
    ☆ Numerous bug fixes and enhancements[/B]

    v1.2.1
    ☆ Reset on failure - automatically resets stalled connection
    ☆ Enhanced boost engine
    ☆ Redesigned UI - more intuitive and smooth
    ☆ Reduced memory footprint
    ☆ Improved help and support
    ☆ Bug fixes


    Special thanks to Mokkami for German translation. If you want to help in translating to your language, please contact me.

    1
    I'm experiencing some weird problems with my provider (vodafone) in my nearby local town (germany). My smartphone has excellent reception (H+, I don't use 4G/LTE) but just doesn't send data through it. It works fine for like 30 seconds, then does absolutely nothing for 2-30 minutes. Really terrible, since my spotify premium becomes useless there.

    Back to topic: Your app sounds great. The UI is a bit laggy but if it works... who cares? I'll leave home in some hours and then test the functionality. Hopefully this helps. Gonna report on later.
    1
    Update will be rolled out this week. :D
    Keep sending your valuable feedback...


    Perhaps allow the user to choose what ip/site to ping for the keep alive? It could then both be used as a keep alive AND possibly send an alert if a site is offline or at lease the notification might alert them.

    I'd also appreciate a method of having it start with both the connection stabalizing AND the ping enabled either via settings or by tracking state of last time it was ran?