like other people's can not mount anything ,
use TWRP boot , press install show internal storage 0mb
Is it means the storage over ?
Your emmc looks ok. Do as the previous user suggested and get a SanDisk class 4 SD and make a bootable CWM SD per the instructions in item 1a in my HD/HD+ CWM thread linked in my signature. Then use that to flash a plain stock zip from item 6.1. My nook still bricked and cannot use any cwm except no-emmc version
2.I checked again, my nook is MGB4GA , I think should not be emmc bug
now
I use no-emmc version CWM flash EMMC recovery V6.0.3.2 ,
but without sdcard can only boot in the logo and stop there
e:can't mount /cache/revoery/command
and I use adb to check , show like below
df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 398228 48 398180 0% /dev
~ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 30535680 mmcblk0
179 1 128 mmcblk0p1
179 2 256 mmcblk0p2
179 3 15360 mmcblk0p3
179 4 16384 mmcblk0p4
179 5 49152 mmcblk0p5
179 6 49152 mmcblk0p6
179 7 458752 mmcblk0p7
259 0 688128 mmcblk0p8
259 1 475136 mmcblk0p9
259 2 28770304 mmcblk0p10
179 16 2048 mmcblk0boot1
179 8 2048 mmcblk0boot0
179 24 7761920 mmcblk1
179 25 7761888 mmcblk1p1
is this normal?
and is that able to restore from leapinlar's repari.zip?
Your emmc looks ok. Do as the previous user suggested and get a SanDisk class 4 SD and make a bootable CWM SD per the instructions in item 1a in my HD/HD+ CWM thread linked in my signature. Then use that to flash a plain stock zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app
You do not want to use the noemmc CWM if you are wanting to flash to emmc. If the 2.2 will not flash with 6028 then any repair zip I make will not work either.So i need a sandisk card.... unfortunately i have no such card in my hand.
use old card with no-emmc version cwm flash nook 2.1 ,random offset 0x29,final abort , other models unable to be flashed to the system.
use 6028 flash 2.1 or 2.2 can run half but then black screen and shut off.
flash CM10.1 CM10.2 can not run just at the beginning and then black screen and shut off.
so is that possible to use your repair.zip?
You do not want to use the noemmc CWM if you are wanting to flash to emmc. If the 2.2 will not flash with 6028 then any repair zip I make will not work either.
Sent from my SCH-i705 using XDA Premium HD app
Your emmc looks ok. Do as the previous user suggested and get a SanDisk class 4 SD and make a bootable CWM SD per the instructions in item 1a in my HD/HD+ CWM thread linked in my signature. Then use that to flash a plain stock zip from item 6.
Sent from my BN NookHD+ using XDA Premium HD app