Kernel[026]KK4.4(1.60Ghz Quad)UV,CIFS+UTF-8,PowerHAL,Linux-3.x Hybrid [Jun-04]

Search This thread

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
FauxClock App recommended Settings"

CPU Control
  • Max clock - GHz 1.6 GHz for performance, 1.3 GHz for battery
  • Min clock - MHz 100 MHz for both
  • CPU Governor - Interactive for performance and for battery
  • CPU Quiet Governor - userspace for performance, Balanced for Battery
  • Tegra3 Freq Cap - Off for performance, On for battery
  • Set On Boot - On

Voltage Control
  • Set On Boot -
  • Global CPU Voltage - Your preference

Interactive gov control
  • Hispeed - 85 for both
  • Hispeed Frequency - 1.6 GHz for performance, 1.3 GHz for battery
  • Timer Rate - 20000 for both
  • Min Sampling Rate - 50000 for both
  • Set On Boot - On

GPU Control
  • GPU Governor - ondemand for both
  • GPU Fast Response - 80% for Performance, 40% for battery
  • Set On Boot - On for both

I/O Scheduler Control
  • I/O Scheduler (eMMC) - SIO for both
  • Readhead Size (eMMC) - 768 for both
  • Set On Boot - On for both

Misc Control
  • Dynamic File Sync - On for both
  • TCP Congestion Control - Westwood for both

Z-Control
  • Set On Boot - On for both
  • ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
  • ZRAM Enable/Disable - Enable if you mult-task often
  • Clear VFS Cache After Boot - On
  • Auto FS Writeback Delay Mode - On
  • Swappiness - 100% if ZRAM enabled, 0% if disabled
  • VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
  • Dirty Ratio - 20% for both
  • Dirty Background Ratio - 5% for both

Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
 
Last edited:

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
Open Beta may not be stable and may cause issues with your phone!


By loading open beta you have agreed to:

1. To report all random reboots with associated /proc/last_kmsg
2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
a) Phone doesn't boot (without providing any additional information, ROM versions etc)
B) phone is too hot (without providing any additional information, ie OC freq, UV etc)

The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).

If you do NOT agree with the statements above, DO NOT load my Open Beta software.


Kernel 015 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE VERSION unless I stated otherwise)

JB ==> http://faux.androidro.ms/grouper/beta/grouper-faux123-kernel-v015b01.zip
JB ES version ==>

[ build 1 ]
Merged with Google Mr1.1 source updates!
Added 2 interactive governor patches
 
Last edited:

redmonke255

Senior Member
Jan 12, 2012
1,041
295
Fort Worth, Texas
Omg I'm the happiest person right now. Faux made my phone usable, going to make this tablet even better.

Keeping my eye on this.

Sent from my LG-P999 using xda app-developers app
 

Werbs

Senior Member
Apr 25, 2011
103
3
Used your kernels on matrix and gnex, awesome work thanks so much

Sent from my Nexus 7 using xda premium
 

DJLamontagneIII

Senior Moderator
Sep 30, 2008
2,817
3,975
Mom's Basement
Wow very happy this morning you did wonders for my g2x and I know you will do the same for the n7 thanks bro downloading now... and if you ever need a tester I'm in :p

Sent from my Nexus 7 using Tapatalk 2
 

nobnut

Senior Member
Feb 27, 2010
6,922
2,693
003 is out. Fixed bootlooping for some users.

Great, I've only just checked back and seen v003 is out.

I had what appeared to be bootloops on v002, but it still boots fine. It just loops onto the initial splash screen about four or five times and then the bootanimation starts up and the boot is fine.

But thanks for v003!
 

SimPup

Senior Member
Aug 11, 2009
515
174
Running great on paranoidandroid.

Sent from my Nexus 7 using XDA Premium HD app
 

gn00my

Senior Member
Aug 12, 2007
391
69
Zutphen
omg , just got my nex7 today and at the same day faux brings out a nex7 kernel !! awesome !! love your work on my gnex :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 133
    FauxClock App recommended Settings"

    CPU Control
    • Max clock - GHz 1.6 GHz for performance, 1.3 GHz for battery
    • Min clock - MHz 100 MHz for both
    • CPU Governor - Interactive for performance and for battery
    • CPU Quiet Governor - userspace for performance, Balanced for Battery
    • Tegra3 Freq Cap - Off for performance, On for battery
    • Set On Boot - On

    Voltage Control
    • Set On Boot -
    • Global CPU Voltage - Your preference

    Interactive gov control
    • Hispeed - 85 for both
    • Hispeed Frequency - 1.6 GHz for performance, 1.3 GHz for battery
    • Timer Rate - 20000 for both
    • Min Sampling Rate - 50000 for both
    • Set On Boot - On

    GPU Control
    • GPU Governor - ondemand for both
    • GPU Fast Response - 80% for Performance, 40% for battery
    • Set On Boot - On for both

    I/O Scheduler Control
    • I/O Scheduler (eMMC) - SIO for both
    • Readhead Size (eMMC) - 768 for both
    • Set On Boot - On for both

    Misc Control
    • Dynamic File Sync - On for both
    • TCP Congestion Control - Westwood for both

    Z-Control
    • Set On Boot - On for both
    • ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
    • ZRAM Enable/Disable - Enable if you mult-task often
    • Clear VFS Cache After Boot - On
    • Auto FS Writeback Delay Mode - On
    • Swappiness - 100% if ZRAM enabled, 0% if disabled
    • VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
    • Dirty Ratio - 20% for both
    • Dirty Background Ratio - 5% for both

    Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
    94
    DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
    Open Beta may not be stable and may cause issues with your phone!


    By loading open beta you have agreed to:

    1. To report all random reboots with associated /proc/last_kmsg
    2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
    3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
    a) Phone doesn't boot (without providing any additional information, ROM versions etc)
    B) phone is too hot (without providing any additional information, ie OC freq, UV etc)

    The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).

    If you do NOT agree with the statements above, DO NOT load my Open Beta software.


    Kernel 015 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE VERSION unless I stated otherwise)

    JB ==> http://faux.androidro.ms/grouper/beta/grouper-faux123-kernel-v015b01.zip
    JB ES version ==>

    [ build 1 ]
    Merged with Google Mr1.1 source updates!
    Added 2 interactive governor patches
    45
    kernel 023 is official!

    Sorry, it's been SUPER SUPER HECTIC and BUSY for me... I won't be able to do much development or answer questions for the next few days :(

    Just wanted to let you guys know. I am working as much as I could in the background and I will squeeze out any spare time to get things rolling again.
    37
    Quick Update:

    My wife was finally able to check out of the hospital last night around 9 PM. She's home recovering (still experiencing severe pain :( ) I will try to update the kernel to 4.2.2 when possible. Thanks for all the well wishes and support!