Ok I need help getting back to stock asap!!!

simmo0020 · Jun 17, 2014

Hi, please can someone help me getting back to stock. I have tried using guides but I am just stumped.

My phone is a UK model unlocked to any network, I have messed around with it a lot and think I have messed up the radios or something as I am only getting Edge connectivity even though all my friends are getting HSPA on the same network, something is just not right!

C:\Users\Nath\Desktop\Fastboot>Fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.20.3263.16
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: SH3BRW902127
INFOimei: xxxxxxxxxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 3754mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.051s

SaHiLzZ · Jun 17, 2014

Soff first. Then you can flash an older RUU..

simmo0020 · Jun 17, 2014

SaHiLzZ said:
Soff first. Then you can flash an older RUU..

Can't get S-OFF have tried and tried, think it's cos my H-BOOT is 1.56

simmo0020 · Jun 17, 2014

When I try sideloading this is what I get

C:\Users\Nath\Desktop\Fastboot>adb sideload 4.19.401.11.zip
Android Debug Bridge version 1.0.26

-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.

-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device

device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.

adb help - show this help message
adb version - show version num

DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition

scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u
pdated.

- If it is "system" or "data", only the corresponding partition
is updated.

simmo0020 · Jun 17, 2014

Rumrunner result

==================== rumrunner S-OFF 0.5.0 ==============================

rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.

The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.

Do you understand the implications of this warning?
(Yes/No)
yES
Type 'Yes' or 'No'
(Yes/No)
Yes

Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner

(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this w
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF

Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (35/120)
must ferment longer...

must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit

shabzbd · Jun 17, 2014

simmo0020 said:
Can't get S-OFF have tried and tried, think it's cos my H-BOOT is 1.56

There are some known problems with HBoot 1.56 in regards to SOFF.. try Firewater that is known to work

However, me being a noob am not allowed to post external links.. But the link is in this thread.. do let me know if it works..

http://xdaforums.com/showthread.php?t=2633276

simmo0020 · Jun 17, 2014

shabzbd said:
There are some known problems with HBoot 1.56 in regards to SOFF.. try Firewater that is known to work

However, me being a noob am not allowed to post external links.. But the link is in this thread.. do let me know if it works..

http://xdaforums.com/showthread.php?t=2633276

Tried this and just get the whelp this sucks message

Seanie280672 · Jun 17, 2014

Try ADB push instead of sideload, download the 401 gurureset rom, ive used it loads of times, adb push it to your sdcard, then flash it in twrp recovery, select to wipe data and also select stock radio and stock recovery when given the option, once its finished and set up you will be completely stock and get OTA's

adb push (romname).zip /sdcard/ (from within recovery main page)

http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/

Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016

simmo0020 · Jun 17, 2014

Seanie280672 said:
Try ADB push instead of sideload, download the 401 gurureset rom, ive used it loads of times, adb push it to your sdcard, then flash it in twrp recovery, select to wipe data and also select stock radio and stock recovery when given the option, once its finished and set up you will be completely stock and get OTA's

adb push (romname).zip /sdcard/ (from within recovery main page)

http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/

Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016

Just keep getting this

C:\Users\Nath\Desktop\htc one>adb push rom.zip /sdcard
cannot stat 'rom.zip': No such file or directory

Seanie280672 · Jun 17, 2014

simmo0020 said:
Just keep getting this

C:\Users\Nath\Desktop\htc one>adb push rom.zip /sdcard
cannot stat 'rom.zip': No such file or directory

you do have fastboot and adb on your computer right ?

you must place the rom.zip file in the same folder as adb and fastboot and then open a command window there, when you type the file name of the zip, it must be exactly the same as the zip file itself, capital letters, lower case etc.

you are also missing another forward slash from the end of your command /sdcard/

shabzbd · Jun 17, 2014

Are you root at the moment? This is what i found.. from another thread.. check out this post..

http://xdaforums.com/showpost.php?p=52431720&postcount=10

simmo0020 · Jun 17, 2014

Seanie280672 said:
you do have fastboot and adb on your computer right ?

you must place the rom.zip file in the same folder as adb and fastboot and then open a command window there, when you type the file name of the zip, it must be exactly the same as the zip file itself, capital letters, lower case etc.

you are also missing another forward slash from the end of your command /sdcard/

Ok so a little progress made, I managed to flash the guru reset stock ROM but I still only have EDGE.

Also I notice I am missing a main version. cpId and microp??

INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.21.3263.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: SH3BRW902127
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 3813mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.047s

Seanie280672 · Jun 17, 2014

those were missing from your other output too, but nothing to worry about, mine is missing too, do you get OTA's now ? whith each OTA you should get a radio update too.

when you flashed the guru reset, did you select to install stock recovery and stock radio, did you also select to wipe data ?

simmo0020 · Jun 17, 2014

Seanie280672 said:
those were missing from your other output too, but nothing to worry about, mine is missing too, do you get OTA's now ? whith each OTA you should get a radio update too.

when you flashed the guru reset, did you select to install stock recovery and stock radio, did you also select to wipe data ?

Yeah OTA's are available, is it worth updating?

Seanie280672 · Jun 17, 2014

yes definitely give it a try, download over wifi only not mobile network.

---------- Post added at 01:20 PM ---------- Previous post was at 01:18 PM ----------

Also I forgot to mention, check your APN setting regarding your mobile data being edge only, they could be wrong.

simmo0020 · Jun 17, 2014

Seanie280672 said:
those were missing from your other output too, but nothing to worry about, mine is missing too, do you get OTA's now ? whith each OTA you should get a radio update too.

when you flashed the guru reset, did you select to install stock recovery and stock radio, did you also select to wipe data ?

Yeah I did.

I'm downloading the system update now.

This whole EDGE issue has me super confused.

When I go in to the city I am getting LTE no worries but near where I live I am only getting EDGE even though others around me are getting HSPA, so I know the phone is capable of it so it surely can't be a hardware issue?

Seanie280672 · Jun 17, 2014

simmo0020 said:
Yeah I did.

I'm downloading the system update now.

This whole EDGE issue has me super confused.

When I go in to the city I am getting LTE no worries but near where I live I am only getting EDGE even though others around me are getting HSPA, so I know the phone is capable of it so it surely can't be a hardware issue?

Others ? same phone same network ?

alray · Jun 17, 2014

simmo0020 said:
When I try sideloading this is what I get

C:\Users\Nath\Desktop\Fastboot>adb sideload 4.19.401.11.zip
Android Debug Bridge version 1.0.26

-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.

-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device

device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.

adb help - show this help message
adb version - show version num

DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition

scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u
pdated.

- If it is "system" or "data", only the corresponding partition
is updated.

Just FYI, if you want to adb sideload in the future:

You need at least ADB version 1.0.29 to use sideload, yours is outdated, (1.0.26) and the "adb sideload" command was not implemented yet in this version. Most up-to-date version of ADB is 1.0.31

simmo0020 · Jun 17, 2014

Seanie280672 said:
those were missing from your other output too, but nothing to worry about, mine is missing too, do you get OTA's now ? whith each OTA you should get a radio update too.

when you flashed the guru reset, did you select to install stock recovery and stock radio, did you also select to wipe data ?

Seanie280672 said:
Others ? same phone same network ?

Different phones same network but here is the weird bit, the only network I seem to be able to use a sim card on effectively out here is Rogers, any others I can't get signal with.

My friends are using a variety of phones on different networks and all have HSPA, Rogers, Telus and Virgin, anytime I try to use a Telus or Virgin sim around here I get nothing, at least with Rogers I get EDGE, in town I had HSPA with Telus and LTE with Rogers.

simmo0020 · Jun 19, 2014

Still struggling with Data even after going back to sock, in fact really struggling for a signal completely.

Please help!

Ok I need help getting back to stock asap!!!

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Inactive Recognized Contributor

Senior Member

Senior Member

Similar threads

Top Liked Posts