FORUMS
Remove All Ads from XDA
Thread Deleted Email Thread
Prev Previous Post   Next Post Next
DO NOT TRY, THIS WILL NOT WORK FOR NOW.

Hey guys, here's the manual for how to get SuperCID WITHOUT S-OFF.

NOTE: THIS IS NOT FOR BEGINNING USERS, YOU WILL CHANGE THE BOOTLOADER WHICH MIGHT BRICK YOUR DEVICE, BE CAREFUL

Thanks to vogonpoetlaureate for finding where the CID is, he's a great guy so go thank him!


Assuming you have ADB (Android Debugging Bridge) installed, open up your command prompt and type this:

Code:
su
dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7
Now you have it dumped on your SD-Card

Next, type "exit" and again, "exit".

Type
Code:
adb pull /sdcard/mmcblk0p7
BE SURE YOU KNOW WHAT SIZE IT IS BEFORE CONTINUING

Open the file with your HEX-Editor, assuming you have one downloaded. I personally use XVI32.

You will see your CID on the fourth line, in my case it's HTC__E11.

Change it to 11111111 and save the file as mmcblk0p7MOD. BE SURE IT'S THE EXACT SAME SIZE AS BEFORE.

When you're back in command prompt, type
Code:
adb push mmcblk0p7MOD /sdcard/mmcblk0p7MOD
Type
Code:
adb shell
su
dd if=/sdcard/mmcblk0p7MOD of=/dev/block/mmcblk0p7
Reboot to bootloader, (adb reboot-bootloader) and go into fastboot.

Type
Code:
fastboot oem readcid
It should read 11111111.

Thanks to grankin01 for the base thread: http://forum.xda-developers.com/show...1#post26516911

I AM NOT RESPONSIBLE FOR BRICKED DEVICES



It works with me, PLEASE, if it works with you reply here!
The Following 12 Users Say Thank You to MaartenXDA For This Useful Post: [ View ] Gift MaartenXDA Ad-Free
Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes