[rom][nand][omgb] - 1.2.3{2.3.7}

[ACL] · Nov 15, 2011

This is a testing thread for OMGB. Here is what this build is all about. I'm quoting "r2doesinc" and adding my own comments relative to our build. This build was made with full permission of the OMGB dev team.

This is for all you guys out there who want their phone slim, sleek, and fast.

2.3.7 Based.
Fast
Features
- Three in one reboot mod
- Extra Rom info in About Phone
- Screen On/Off enabled by default
- Ubuntu font
- T3hh4xx0r Wallpapers
- TMO Theme Changer

Stable version 1.2.3( Jan 16 2012) + (Feb 1 2010 update)
http://rhodium-nand.googlecode.com/files/OMGB_rhodium-1.2.3-01162012.zip
http://rhodium-nand.googlecode.com/files/OMGB_UPDATE-02012012.zip

Latest version 1.2.3( May 4 2012) Latest
http://rhodium-nand.googlecode.com/files/OMGB_rhodium-1.2.3-05042012.zip

You will need the following to get started (LK, Recovery and of course OMGB).

http://rhodium-nand.googlecode.com/files/RHODIMG.NBH
http://rhodium-nand.googlecode.com/files/cwm_recovery_latest.img
http://rhodium-nand.googlecode.com/files/GAPPS.zip

Instructions are simple. README.

Important Notes
1 - GPS was removed from 1.2.3. However, here is a link to add it back via recovery if you want to test it. Its still a little buggy
2- CDMA rhods - I strongly recommend updating your radio to the latest vz radio.
4 - If you find your touch screen is not very accurate. You may need to calibrate it. Download our calib app here

[ACL] · Nov 15, 2011

What is not working. This was stolen from Manekineko's list (thanks dood)

Notification LED Fully working.
Light sensor and auto-backlight Fully working
Proximity sensor Fully Working
Wifi will not connect to WEP, only WPA or unencrypted.
Bluetooth Partially broken. Some audio has been reported not to work
3.5mm headset jack Fully Working
extUSB headset jack Fully Working
Battery Fully working.
Stylus removal/insertion sensor is completely not working.
TV Out is completely not working.
Zoom Bar is completely not working.
Tethering Not working.
Speakerphone mute button on back doesn't do anything.
Special keyboard keys : Not sure.. need feedback on this.
Internal memory : fully working
USB Mass Storage : fully working
Shutdown : fully working
Reboot : fully working (including rebooting into recovery and bootloader)
Video playback: fully working
KB/Button Lights : Currently they work when light sensor detects a change. Not sure how they are actually supposed to work
TS calibration : Calibration is done automatically. We also have a TS calibration app(look for it in the download page).
Overclock : Set cpu supported by the kernel.
CDMA DATA : working and ability to have the world phone menu.
GPS : Was removed from 1.2.3. Here is a link to add it back via recovery.
Camera: Fully working

arrrghhh · Nov 15, 2011

W00t! Hopefully this is a precursor for GSM testing

.

intergon · Nov 15, 2011

* Light sensor and auto-backlight: Fully working
* Proximity sensor: Fully Working

That's interesting. Could it be possible to implement these functions in builds for Rhod100 GSM?

arrrghhh · Nov 15, 2011

intergon said:
That's interesting. Could it be possible to implement these functions in builds for Rhod100 GSM?

That's the idea

.

GnobarEl · Nov 15, 2011

Can't wait to test it!
I have a Rhod100 GSM.

Please, post some documentation (if possible a video

) with how to flash it.

Thanks!

arrrghhh · Nov 15, 2011

GnobarEl said:
Can't wait to test it!
I have a Rhod100 GSM.

Please, post some documentation (if possible a video ) with how to flash it.

Thanks!

When it's out of testing, there will be documentation. I doubt there'll be a video... I don't really see the point. Can you not follow directions?

GnobarEl · Nov 15, 2011

heeh, you'r right! documentation will be fine, no need the video, some times i'm just lazy

milda25 · Nov 15, 2011

GnobarEl said:
Can't wait to test it!
I have a Rhod100 GSM.

Please, post some documentation (if possible a video ) with how to flash it.

Thanks!

This dev build will be only for CDMA (in title - rhod400/500 only) ... Isn`t it?

[ACL] · Nov 15, 2011

lol.. hey fellas there is no working gsm version just yet. This is a cdma only as you can see in the title. The day you see it switch from 400/500, then you will see the links updated for all devices.

Problem right now is that i only have 1 gsm rhod thats nand so i cant go back to winmo and reverse LS/ panel/ prox. It will take time and i only have this rhod for a month so at least i want to get it booting with no feature than nothing at all.

milda25 · Nov 18, 2011

Has anyone already tried NAND on Rhod400/500? What about this?

arrrghhh · Nov 18, 2011

milda25 said:
Has anyone already tried NAND on Rhod400/500? What about this?

Works great on my 400.

milda25 · Nov 18, 2011

arrrghhh said:
Works great on my 400.

It's great. I can't wait to see release for GSM ... CDMA for GSM is unusable, isn't it?

ACoolGuy · Nov 18, 2011

I am unable to download the third link in the first post. Likely due to the "..."

My excuse is that I am sick. HAH. I followed the main site to the download section. Now, I do see a OMGB 1.2.3.....Should we use this one instead?

Edit: Found my answer in the discussion thread. Will use 1.2.2

milda25 · Nov 22, 2011

Any news for GSM NAND?

fishingmedic · Nov 22, 2011

milda25 said:
Any news for GSM NAND?

]

Really????

argenisaz · Nov 22, 2011

[ACL] said:
What is not working. This was stolen from Manekineko's list (thanks dood)

* Notification LED doesn't notify, but just outputs whether your phone is in sleep (green) or active (orange). This is to debug the sleep status.
* Light sensor and auto-backlight: Fully working
* Proximity sensor: Fully Working
* Wifi: will not connect to WEP, only WPA or unencrypted.
* Bluetooth: Working for file transfers but sound routing is still broken
* 3.5mm headset jack: Not working.
* extUSB headset jack: Working.
* Battery level reading is pretty inaccurate, best around 50% and least accurate at the extremes. If you find yourself with a dead battery, just plug in the charger and let it sit there. The light will not turn on green on its own so you will need to remove it from the charger and boot to see the status of the charge.
* Stylus removal/insertion sensor: is completely not working.
* TV Out: is completely not working.
* Zoom Bar: is completely not working.
* Tethering: Needs testing i suppose.
* Speakerphone mute button: on back doesn't do anything.
* Special keyboard keys: Seem to work, report back otherwise.
* Internal memory : fully working
* USB Mass Storage : fully working
* Shutdown : fully working
* Reboot : fully working (including rebooting into recovery and bootloader)
* Video playback: fully working
* KB/Button Lights : Currently they work when light sensor detects a change. Not sure how they are actually supposed to work
* TS calibration : Currently its done automatically but no way of calibrating the points. Looking into calibration apps to use.
* Overclock : Set cpu supported by the kernel.
* CDMA DATA : working and ability to have the world phone menu. However sim support is still being worked on.
* GPS : Working but may need further testing.

Hi!

Quick question: is the camera working?

Keep up the good work! And thanks!

teemo · Nov 22, 2011

argenisaz said:
Hi!

Quick question: is the camera working?

Keep up the good work! And thanks!

Quick answer.

argenisaz · Nov 22, 2011

I almost had a heart attack when fastboot wouldn't recognize my phone, but I finally installed OMBG and it's running great!

Thanks!

---------- Post added at 10:41 AM ---------- Previous post was at 10:23 AM ----------

argenisaz said:
I almost had a heart attack when fastboot wouldn't recognize my phone, but I finally installed OMBG and it's running great!

Thanks!

First snag: I rebooted back into recovery, installed de gapps.zip, rebooted back into OMBG and... nothing

no gapps installed.

Any pointers?

EDIT: problem fixed, installed de CM7 gapps.

[ACL] · Nov 22, 2011

argenisaz said:
I almost had a heart attack when fastboot wouldn't recognize my phone, but I finally installed OMBG and it's running great!

Thanks!

---------- Post added at 10:41 AM ---------- Previous post was at 10:23 AM ----------

First snag: I rebooted back into recovery, installed de gapps.zip, rebooted back into OMBG and... nothing no gapps installed.

Any pointers?

EDIT: problem fixed, installed de CM7 gapps.

Someone reported the gapps issue and i'm looking into it for next round of releases.

1.2.3 is the latest and ill update the first page to reflect that.

[rom][nand][omgb] - 1.2.3{2.3.7}

Retired Recognized Developer

Retired Recognized Developer

Inactive Recognized Developer

Member

Inactive Recognized Developer

Member

Inactive Recognized Developer

Member

Senior Member

Retired Recognized Developer

Senior Member

Inactive Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Retired Recognized Developer

Similar threads

Top Liked Posts