[GUIDE] Flashing Stock Firmware on S5282

Search This thread

dashingdwivedi

Senior Member
Nov 20, 2012
181
88
City of Nawab's
"GUIDE FOR FLASHING STOCK FIRMWARE"


1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.

https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1


2-DOWNLOAD ODIN FROM BELOW LINK & EXTRACT IT ON YOUR DESKTOP

http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip


3-Download and Install Moborobo PC Suite from below link It will install Drivers for your phone

http://www.moborobo.com/products/moborobo.html

OR

YOU CAN DOWNLOAD & INSTALL USB DRIVER DIRECTLY FROM BELOW LINK

http://downloadcenter.samsung.com/c...Driver_for_Mobile_Phones_v1.5.23.0-retail.exe


4-NOW FOLLOW BELOW ACTIONS:


1).FIRST CONNECT THE PHONE TO PC IN DOWNLOAD MODE:-

PROCESS FOR DOWNLOAD MODE WRITTEN BELOW

SWITCH OFF YOUR PHONE & PRESS VOLUME DOWN + HOME + POWER TOGETHER YOU LL GET A SCREEN SHOWING WARNING NOW PRESS VOLUME UP IT WILL SHOW YOUR PHONE IS IN DOWNLOADING MODE.

2).THEN OPEN THE ODIN AND YOU LL SEE ID;COM COLOR IN BLUE (IT MEANS PHONE IS CONNECTED).
3).SELECT PDA AND GO TO DESKTOP WHERE YOU HAVE EXTRCTED THAT STOCK FIRMWARE SELECT IT - WAIT FOR CHECKING MD5 TO BE FINISHED CLICK ON START N WAIT FOR 5 MINUTES PHONE WILL BE REBOOT.


DONE YOU HAVE SUCCEFULLY FLASHED STOCK FIRMWARE ON YOUR SAMSUNG GT-S5282.
 
Last edited:

AdibSul

Senior Member
Sep 8, 2012
76
58
Damascus

easymark

New member
Dec 9, 2014
1
0
stock firmware download

Sir GOOD DAY. can you help me. i downloaded ur stock firmware for 4times and its always says unconfirmed network error. does it mean that the file is no longer there?. thanks a lot. :D
 

tpsonwani

New member
Oct 16, 2014
1
0
Flashing Stock Firmware on S5282

Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:

Odin 3.07

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!


Odin 3.09

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!


Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.

Thanks,

T. Prasad
 

atulsaini_22

Member
Jul 14, 2009
23
1
Faridabad
Need Help!!!!

@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.

Please help
 

Attachments

  • IMG_20150416_142619.jpg
    IMG_20150416_142619.jpg
    254 KB · Views: 177

dashingdwivedi

Senior Member
Nov 20, 2012
181
88
City of Nawab's
try to flash the stock rom again before doing reset ur device..... it will work
by the way from past two years m not using it anymore


@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.

Please help
 

dashingdwivedi

Senior Member
Nov 20, 2012
181
88
City of Nawab's
for this issue you can flash pre_rooted_stock firmware provided by @Chirtagh ....it has happend to me also so flashed @Chirtagh's prerooted firmware...

Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:

Odin 3.07

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!


Odin 3.09

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!


Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.

Thanks,

T. Prasad
 

Top Liked Posts