i know that light is no în android but in mcu i think yes.
now what can i change to improvizație unit and make more best ? Like radio or another apps.
I didn't use rk3066 but i guess there should be some diference:good:Is there really big improvment with quadcore rk3188 compared to dual core rk3066 HU ? More responsive ? Navigation is quicker ?
I also face the same problem then I put it on the SD card and boot in recovery, from recovery menu chose "update system/mcu i age from SD card" I guess if image is not compatable it will not update.Does anyone have any tips or work around for updating the MCU. I put it on both the SD card and the USB and it doesn't prompt when booting up. Any info would be appreciated.
I also face the same problem then I put it on the SD card and boot in recovery, from recovery menu chose "update system/mcu i age from SD card" I guess if image is not compatable it will not update.
What resolution is your unit? Is it 800x480, or 1024x600 - the one with two columns of output in the Settings screen?
Note that there is already a pre-rooted Huifei/KGL rk3188 image available, but only for the 1024x600 screen resolution, as yet
It's in post #11989.
I didn't use rk3066 but i guess there should be some diference:good:
I also face the same problem then I put it on the SD card and boot in recovery, from recovery menu chose "update system/mcu i age from SD card" I guess if image is not compatable it will not update.
It is 1024x600 1gb Ram 16gb Nand MTCB-KGL4-V2.47 Android 4.4.4_16042015 KERNEL 3.0.36+ cpu armv7 1.6 GHz (×4) . I can not under stand what is two columns output on setting screen
This really strange. I checked the install-rcovery.sh script and there is only "su" and nothing else. I tried to disable all PA hooks to events, closed PA, left MTC Radio as the last active app and on the next boot PA started again.
You guess wrong, I guess.
I put one image of rk 3066 and tryed on my rk3188 it showed error and did not update by same method I update KGL4 from 2.22 to 2.47 and it works
---------- Post added at 01:11 PM ---------- Previous post was at 01:09 PM ----------
OK, good, then you have already the required pre-rooted image in post #11989. Confirmed by Marius as working.
That made the firmware for the RK3188 800X480. Try to please how to get this firmware?Good question, let me see... in post #11501.
Take care, do not use your unit for checking things out! Unless willing to upgrade to a new rk3188 card.
(as it happened to me)
That made the firmware for the RK3188 800X480. Try to please how to get this firmware?
RK3188 800X480
And what problems with the audio? If the radio sounds bad it depends on MCU.img and it is necessary to open the device mechanically and solder capacitorsHi Malaysk. The problem on the audio depende from file update.img or mcu.img? thanks
My unit (running the as-shipped ROM and MCU) only seems to have 1 volume slider which adjusts all volumes. However, the 'radio' app is significantly louder than everything else, so if I switch from radio to bluetooth or Pandora I end up needing to punch up the volume, and going back to radio I tend to blow out my eardrums.
Is there anything that can be done for this?
Hi together this is an important announcement!
As you knew Mike an me we were talking about a dedicated section.
This is now achieved and I am requested by him to sort things out from here.
I will split out some Key knowledge posts, for example malaysks Firmware-Post, to new Threads in our subforums.
Developers
Please if you create new work open you own Thread in the new forums. If you already have posted here probably wait until I split your post out or write to me to ensure I will split you out if you think I missed you or you have a critical release.
Questionning Users
Please open your own thread for your questions in our new section. I can not split out every question from here. This thread will be left over for searching so please if you have current questions just ask in our new Q&A-Section.
I will start splitting up this thread in about one hour.
You can find the new section at the bottom of this link:
http://xdaforums.com/android-auto
Thank you!
- [user=853627]@coudu[/user] (rooted, stock). Early v4.0 and v4.1 have some problems.
- [user=3590033]@Malaysk[/user] (rooted, with very useful mods, some come with NEXT launcher)
- [user=6041319]@dsa8310[/user] (rooted, almost stock)
[B]- Boot Up:[/B]: time is around 30s.
[B]- GPS[/B]: GPS positions very fast. TomTom, Navigon, Sygic, and regular off-line GPS work. Navigon and Sygic have some problems with some ROMs
[B]- Stand by mode[/B]: Latest ROMs and MCU have the possibility of choosing stand by mode with various times chosen.
[B]- Radio:[/B] radio stations are saved as frequencies
[B]- Bluetooth contacts:[/B] contacts are saved on the device.
- Works fine with Bose system (Audi)
- Possible ground loop noise that needs some tricks to be removed (see section problems)
- Torque works and can run in parallel with A2DP
- ELM327 works (might need special app like CarService in very weird cases)
- Camera works (might be better to get the one with RK3188 chip)
- There is no automatic brightness control because the unit does not have light sensor, but there are apps that can help
- The touch screen is extremely responsive. It works as good as most phones.
1- Install the APK.
2- Make sure you are connected to WiFi and you have an internet connection.
3- Open Root Master (do not upgrade to newer version unless you can read chinese, The newest version has different options, all in chinese. Version 2.1.1 just has a button that says "root".))
4- Press root button
5- Chinese characters will flash across the screen.
6- A second popup box will appear, press the purple button.
- cd /mnt/sdcard
- su
- pm install "NameOfTheApp".apk