[STICKY][APP][FIX] Touch Screen Calibration App
- Thread starter gojimi
- Start date
LOL
Wtf? U are The ****in trollmaster mate!
Wtf? U are The ****in trollmaster mate!
1.Download app
2.Find a live chicken
3.Buy some super glue
4.Buy a coat for the chicken
5.Pluck the chicken
6.Put new coat on chicken and turn it loose
7.Locate the box your GTab came in
8.Super glue chicken feathers to GTab box (may void your warranty)
9.Install app on your GTab
10.Fill GTab box with ketchup
11.Find a butter knife
12.Set Gtab on floor
13.Place Gtab chicken feather box on floor (place drop cloth under box)
14.Gtab box must be 6.66 ft from Gtab
15.Open app on Gtab
16.Hit Calibrate button
17.Without touching GTab quickly run over to GTab box and stab it with the butter knife 5 times
18.Spin in circle 3 times to the left and then 4 times to the right
19.Walk calmly to your Gtab
20.Observe it....DON'T TOUCH IT YET
21.Clean up the Gtab box mess and wash your hands
22.You may now retrieve your GTab and enjoy its new vodoo calibration fix
G
GuestK00447
Guest
Success also on Ulefone Power/App-installation security
2. could install only by bypassing security. apps from unknown sources are blocked from installation.
now i cant find the knob where reblocking these.
i could finally get access to winxp-pc(needed a lot of nerves) to transfer the app to android.
2. could install only by bypassing security. apps from unknown sources are blocked from installation.
now i cant find the knob where reblocking these.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
83This is a Calibration app that you can launch from the app drawer instead of the crazy calibration.ini method that has been floating around since day one. This app was originally discovered by BumbleBee. The orignal app was called "moduleap" so if you picked it up while in our IRC chat room then uninstall it and download this.
I have modded the TouchScreen calibration app. It is easier to use now... includes a launcher icon renamed to be easier to understand it's purpose.... removed the ERROR messages etc.
Again uninstall the old moduleap app if you installed it recently.
Make sure you don't touch the screen during recalibration.
THIS WILL WORK ON ANY ROM
Download: http://vegantab.gojimi.com/download/TouchRecalibrate.apk
As Always Enjoy!17
1.Download app
2.Find a live chicken
3.Buy some super glue
4.Buy a coat for the chicken
5.Pluck the chicken
6.Put new coat on chicken and turn it loose
7.Locate the box your GTab came in
8.Super glue chicken feathers to GTab box (may void your warranty)
9.Install app on your GTab
10.Fill GTab box with ketchup
11.Find a butter knife
12.Set Gtab on floor
13.Place Gtab chicken feather box on floor (place drop cloth under box)
14.Gtab box must be 6.66 ft from Gtab
15.Open app on Gtab
16.Hit Calibrate button
17.Without touching GTab quickly run over to GTab box and stab it with the butter knife 5 times
18.Spin in circle 3 times to the left and then 4 times to the right
19.Walk calmly to your Gtab
20.Observe it....DON'T TOUCH IT YET
21.Clean up the Gtab box mess and wash your hands
22.You may now retrieve your GTab and enjoy its new vodoo calibration fix
6
If your screen is not responding to your touches or is very sluggish at responding, then try these simple steps once you have the Superuser and Terminal apps from Market installed. Open the Terminal app and in the window type only the commands in bold (and, don't touch the screen until the '#' prompt returns):
Based on my research into this issue, I believe it should work--and if it does report success here please so that I can suggest it to other users. If it does not try the procedures outlined in this thread.Code:$ [B]su[/B] # [B]echo -n 1 > /sys/devices/platform/tegra_touch/calibration; sleep 5[/B]
EDIT: Or, just flash the zip file in the attachment using CWM to re-calibrate the touchscreen. It should work as long as the CWM kernel is one of the stock VS kernels (version 2.6.32.xx), or, a custom one based off of it---like the clemsyn and pershoot kernels.3
