[JB+][3.0.8/2.6.32 kernel] CM10.1 Android 4.2.2 for the Defy(+)

Search This thread

Quarx

Inactive Recognized Developer
Jun 19, 2007
1,322
18,790
32
Omsk
www.quarx2k.ru
Android 4.2.2 Jellybean for Defy and Defy+

Mirrors: http://www.uncledan.it/android-files/CM10.1/
Gapps: http://goo.im/gapps

Experimental builds with 3.0.8 kernel:
Not for daily usage!
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/
Works: SD-Card, Bluetooth, Torch, Leds, USB all modes, HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
Not work: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
Known problems: Low speed of USB Mass-storage, Display not always wake after sleep, Suspend not work correctly.

Builds on stable 2.6.32 kernel:
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/
Mirror: http://d-h.st/users/Quarx/?fld_id=14052#files

Problems/TODO:
1. BT-headset has problems.
2 .BT will not work, if FM is enabled.
3. Video recording is not good.
4. Memory leak after some days.
5. Delay on wakeup.

09.04.13: Suspend optimizations.
13.04.13: Fix BT, add Volume Rocker Wake Support and Expanded Desktop preference. 5Ghz WiFi (not tested)
15.04.13: Fix FM-Radio, Add pie controls, TWRP recovery..

11.05.13 Updated USB-Gadget to native for 4.x, fix mtp/ptp/storage/tethering. Removed usb.apk/usbd. Many minor fixes..
16.05.13 Very experimental build, contain a lot of updates from kernels 2.6.33 - 3.1. Increased performance, added swap. Memory management updated to 2.6.39(3.0) state. Some parts updated to 3.1. Blechd0se patches for interactive gov.
07.06.13 Fix 2g/3g data (thanks to Kayant for finding the right way to resolve problem). More safe mount options (should fix problems of random bootloops). Fix Google Messaging service (thanks to ccav2000)
16.06.13 Updated wifi driver & wpa_supplicant, fix bt-tether by @dh.harald. Improvement in interactive governor by @Blechd0se. Updated kernel with some patches from upstream.
09.07.13 Stability fixes. Updated bootmenu. This build not contain ZCache/Zram/Swap. Who want use ZRAM and other experimental features, can install @Blechd0se's kernel

F.A.Q
 

Attachments

  • device-2013-02-24-142640.jpg
    device-2013-02-24-142640.jpg
    24.3 KB · Views: 33,471
  • device-2013-03-26-000143.jpg
    device-2013-03-26-000143.jpg
    25.4 KB · Views: 29,326
Last edited:

Shubhamqweasd

Senior Member
Jun 25, 2011
571
282
DELHI
how to get pass , the first boot setup ,
the gapps provided is too large for defy's data partition :(
so cant get specific needed files for setup :( , can any1 help ??
 
  • Like
Reactions: P.JComfort

vap_66

Senior Member
Jun 12, 2011
805
510
Okay, the excitement is understandable, but guys, can you keep this thread CLEAN? Express your gratitude with a donation and the Thanks button, not by flooding the thread with delighted squeals. It's development after all.
I hope (in vain though) that this will be the last offtopic post.

Trimis de pe ASUS Transformer Pad TF300T
 

ginnnts

Member
May 30, 2008
25
3
36
Rezekne
So for me, after PIN input, it shows "Unfortunately, the process com.google.process.gapps has stopped" and then "Unfortunately, Setup Wizard has stopped" message... and it stays like that even after i press OK! I can access notification bar, but no start screen!

What to do?
 
  • Like
Reactions: Omya

FcukBloat

Senior Member
Jun 18, 2012
6,284
3,012

turffe

Senior Member
Jul 14, 2012
413
209
27
Kaunas
Redmi 9
Apple iPhone 12
System Wizard stopped fixed

After installing CM10.1 with gapps you can't bypass Setup Wizard stopped. How bypass this error: 1.wipe all data 2.install CM10.1 nightly 3.Wipe all data 4.boot in 4.2, it will boot without errors. 5.Install your needed google apps from market. Error caused by gapps (I think its because low space in ROM - installing CM10.1 without gapps i getted only about 15mb free), so if we want to use future ROMS (4.3 - CM11 or CM10.3) we need to resize SystemROM, to resize SROM - we need unlock bootloader, to bypass bl - TI Board Conf tool & 16MB.bin or some future way :p)
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 661
    Android 4.2.2 Jellybean for Defy and Defy+

    Mirrors: http://www.uncledan.it/android-files/CM10.1/
    Gapps: http://goo.im/gapps

    Experimental builds with 3.0.8 kernel:
    Not for daily usage!
    Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/
    Works: SD-Card, Bluetooth, Torch, Leds, USB all modes, HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
    Not work: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
    Known problems: Low speed of USB Mass-storage, Display not always wake after sleep, Suspend not work correctly.

    Builds on stable 2.6.32 kernel:
    Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/
    Mirror: http://d-h.st/users/Quarx/?fld_id=14052#files

    Problems/TODO:
    1. BT-headset has problems.
    2 .BT will not work, if FM is enabled.
    3. Video recording is not good.
    4. Memory leak after some days.
    5. Delay on wakeup.

    09.04.13: Suspend optimizations.
    13.04.13: Fix BT, add Volume Rocker Wake Support and Expanded Desktop preference. 5Ghz WiFi (not tested)
    15.04.13: Fix FM-Radio, Add pie controls, TWRP recovery..

    11.05.13 Updated USB-Gadget to native for 4.x, fix mtp/ptp/storage/tethering. Removed usb.apk/usbd. Many minor fixes..
    16.05.13 Very experimental build, contain a lot of updates from kernels 2.6.33 - 3.1. Increased performance, added swap. Memory management updated to 2.6.39(3.0) state. Some parts updated to 3.1. Blechd0se patches for interactive gov.
    07.06.13 Fix 2g/3g data (thanks to Kayant for finding the right way to resolve problem). More safe mount options (should fix problems of random bootloops). Fix Google Messaging service (thanks to ccav2000)
    16.06.13 Updated wifi driver & wpa_supplicant, fix bt-tether by @dh.harald. Improvement in interactive governor by @Blechd0se. Updated kernel with some patches from upstream.
    09.07.13 Stability fixes. Updated bootmenu. This build not contain ZCache/Zram/Swap. Who want use ZRAM and other experimental features, can install @Blechd0se's kernel

    F.A.Q
    116
    Good news.. 720p decoding works great, full hw decoding:)
    78
    New build uploaded:
    Sdcard, charging, all sensors, leds+white, all hw buttons, stable 60fps+hwc, sound via speaker, bluetooth/tethering, Usb MTP/PTP/Tethering/MassStorage, 300mhz bug fixed, kill_dss=1, fixed mpu freq on boot, adb icon now is removed after unplug cable.
    Please check bt headset.
    http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/CM10.1-20130210-NIGHTLY-mb526.zip
    73
    Before that happens, Quarx needs a new DEFY. Please donate to him what you can.
    Sent from my Nexus 7 using xda app-developers app
    I'm really surprised how community appreciated our work.
    Big Thanks, I hope soon I'll get a defy:)

    No, devs not abandoned 3.0 kernel;)

    Sent from my Nexus 7 using xda app-developers app
    72
    New build uploaded:) http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/CM10.1-20130208-NIGHTLY-mb526.zip
    Fix low fps + hwc, fix lags, fix sound in speaker, fix white led and many other small fixes.
    Boot now is more stable..
    After boot, check cpu settings. Max/Min can be 300/300!
    Media Server can affect on performance while scanning.

    Please try on defy/defy+ different versions, maybe on some models will be problems.