It is not very motivating hearing this question over and over again, but I'll be nice to you: In short, we're the awesome dudes.
Have a look at this.
EF - Elementary Files
AD - Administrative (Data) Field
BCD - Binary-Coded Decimal (compressed)
CHV - Card Holder Verification (usually your SIM code)
TLV - Tag, Length, Value
BER-TLV - Object that conform to the Basic Encoding Rules (BER)
RFU - Reserved for Future Use-----------------------------------------------------------
Name: EFAD (Administrative Data)
Identifier: '6FAD' (28589)
File size: 3+X bytes
-----------------------------------------------------------
Byte Description
-----------------------------------------------------------
1 UE operation mode
2-3 Additional information (incl. cipher indication)
4 Length of MNC of IMSI
5-X RFU
-----------------------------------------------------------
UE Operation Mode: (byte 1)
-----------------------------------------------------------
This is the mode of operation for the MS.
Coding: (Initial value)
'00' - normal operation
'80' - type approval operations
'01' - normal operation + specific facilities
'81' - type approval operations + specific facilities
'02' - maintenance (off line)
'04' - cell test operation
NOTE: All other values are RFU (reserved for future) use
-----------------------------------------------------------
Additional Information: (byte 2-3)
-----------------------------------------------------------
Coding:
- Specific facilities code (if b1=1 in byte 1);
- ME manufacturer specific information (if b2=1 in byte 1).
Ciphering indication is enabled by enabling both the specific
facilities bit (b1) in byte-1 AND the cipher indicator bit (b1)
in byte-3. Thus the administrative data field has to be:
Byte-1: 0x01 0000 0001
Byte-2: 0x00 0000 0000
Byte-3: 0x01 0000 0001
Byte-4: 0x02/3 0000 001x
-----------------------------------------------------------
Length of MNC in the IMSI: (byte 4)
-----------------------------------------------------------
The length indicator refers to the number of digits,
used for extracting the MNC from the IMSI.
This value codes the number of digits of the MNC in
the IMSI. Only the values (b1-b2) '0010' and '0011' are
currently specified, all other values are reserved
for future use.
-----------------------------------------------------------
Relevant Documents:
TS 22.101
TS 31.102
TS 33.102
-----------------------------------------------------------AT+CRSM=<command>[,<fileid> [,<P1>,<P2>,<P3> [,<data> [,<pathid>]]]]
<command> This is the operation to be performed:
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
<fileid> This is an integer which is the identifier of a elementary
datafile (EF) on SIM. Mandatory for every command except
STATUS and may be e.g.:
Hex Dec File
---------------------
6F37 28471 ACMmax
6F07 28423 IMSI
6F39 28473 ACM
6F41 28481 PUKT
6F42 28482 SMS
Structure:
[CLA INS P1 P2 P3 Data]
The bytes have the following meaning:
CLA Is the class of instruction (ISO/IEC 7816-3 [25]), 'A0' is used in the GSM application;
INS Is the instruction code (ISO/IEC 7816-3 [25]) as defined in this subclause for each command;
P1, P2, P3 Are parameters for the instruction. They are specified in table 9. 'FF' is a valid value for
P1, P2 and P3. P3 gives the length of the data element. P3='00' introduces a 256 byte data transfer
from the SIM in an outgoing data transfer command (response direction). In an ingoing data transfer
command (command direction), P3='00' introduces no transfer of data.
SW1 and SW2 Are the Status Words indicating the successful or unsuccessful outcome of the command.
-------------------------------------------------------------------------------
Dec. <sw1> <sw2> Description
-------------------------------------------------------------------------------
144 0x90 0x00 normal entry of the command, indicating OK
103 0x67 0xXX incorrect parameter P3
0x6B 0xXX incorrect parameter P1 or P2
0x6D 0xXX unknown instruction code given in the command
0x6E 0xXX wrong instruction class given in the command
0x6F 0xXX technical problem with no diagnostic given
0x9F 0xXX length XX of the response data
0x92 0x0X update successful but after using an internal retry routine X times
0x92 0x40 memory problem
0x94 0x00 no EF selected
0x94 0x02 out of range (invalid address)
0x94 0x04 file ID not found; pattern not found
0x94 0x08 file is inconsistent with the command
0x98 0x02 no CHV initialized
0x98 0x04 Access condition not fullfiled / unsucc. CHV verify / authent.failed
0x98 0x08 in contradiction with CHV status
0x98 0x10 in contradiction with invalidation status
0x98 0x40 Unsuccessful CHV-verification. Or UNBLOCK CHF / CHV blocked /UNBL.blocked
0x98 0x50 Increase cannot be performed. Max. value reached
-------------------------------------------------------------------------------[B]AT+CRSM=176,28589,0,0,3[/B]
+CRSM: 144,0,"000000"
==> Bytes: 1-3 = 00,00,00
byte1: "MS operation mode"
byte2: "Specific facilities" B1
byte3: "Specific facilities" B2 (+ cipher indication)
==> [COLOR=Red]Ciphering indication is disabled[/COLOR]
Note: a response like this "+CRSM: 103,3" indicates that there is
a problem with P3 and that the value for P3 should be 3.AT+CRSM=214,28589,0,0,3,"010001"AT+CRSM=214,28589,0,0,3,"100010"
