Samfirmware EF02.tar download! OTA Modem update EF10

Search This thread

hienkhieu

Senior Member
May 9, 2008
150
76
Can somebody tell me what am I doing wrong? Once I get to the "Downloading ... Do not turn off Target!!!" screen. I plug cable in and I run Odin3 my message says "<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-EF02-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)" The phone never reboots, what am I missing?

Your phone was not connected. Make sure you have installed USB driver.

Sent from my SPH-D700 using Tapatalk
 

YellaHayes

Senior Member
Dec 23, 2008
73
3
Camera issue

Flashed this a couple of days ago and it worked great. Now my camera doesnt work. And actually, not sure if it ever did after flashing.
 

pcmedics911

Senior Member
Apr 24, 2010
113
4
I can't OTA get EF10. Is there someplace I can download EF10 baseband to install on EF02?

Thank you
 

Esteef

Senior Member
Sep 12, 2010
177
57
Looks like this thread died out back in July... Is anybody still running gingerbread ?
 

onilink67

Senior Member
Nov 23, 2008
298
48
Austin
can someone tell me why im having so much trouble. ive done the ota then i odined this http://drockstar.devphone.org/EpicTa....1.0.1.tar.md5
and when i go back into recovery to flash this www.holylivingfuck.com/Stuff/su.zip
its in blue letters not purple and it wont let me flash it. anything i try is a aborted. any help?

This is an Old leak there have already been 2 official gingerbread builds both EI22 and EH30 I'd advise you to flash one of them
 

gorelow

Senior Member
Jul 16, 2008
245
6
i keep looking all the time and dont understand why they have a video showing gingerbread 22 on the device hes using and then the odin doesnt work :). can someone send me a link that i can use to odin and then be able to flash the su. unless thats outdated too. thanks so much ive wasted so much time looking every where on every site
 

onilink67

Senior Member
Nov 23, 2008
298
48
Austin
i keep looking all the time and dont understand why they have a video showing gingerbread 22 on the device hes using and then the odin doesnt work :). can someone send me a link that i can use to odin and then be able to flash the su. unless thats outdated too. thanks so much ive wasted so much time looking every where on every site

best is to ODIN back to EC05 and let it update itself to EI22 and then to EH30 there are threads with both of these stock .zip files as well but probably easiest with EI22 just to let your phone download it. Then Flash the newest CWM 5.0.2.7 or something like that. All this is stickied in the Dev section.
 
  • Like
Reactions: gorelow

gorelow

Senior Member
Jul 16, 2008
245
6
okay il look for that, thanks if it will ever update half the time it starts and then after it roboots to install it locks up with the yellow exc point inside the white triangle and the android guy. must be my phone
 

|| Acer ||

Senior Member
Oct 21, 2010
3,518
528
Chicago
best is to ODIN back to EC05 and let it update itself to EI22 and then to EH30 there are threads with both of these stock .zip files as well but probably easiest with EI22 just to let your phone download it. Then Flash the newest CWM 5.0.2.7 or something like that. All this is stickied in the Dev section.

EL30* Let's not make this any more confusing lol.
 

gorelow

Senior Member
Jul 16, 2008
245
6
ive tried 5 times to get the ota and after it dls it locks up and wont install. is there a el30 flash out yet?
 

thomasskull666

Senior Member
Sep 24, 2010
1,553
412
St. Louis
ive tried 5 times to get the ota and after it dls it locks up and wont install. is there a el30 flash out yet?

I would suggest creating a new thread in Q&A instead of bumping this old and irrelevant one. Far more people are going to see your question there rather than here. No more posting in here, seriously.

Sent from my SPH-D700 using xda premium
 
  • Like
Reactions: dzl

KennyG123

Senior Moderator / Mod Committee / Spider-Mod
Staff member
Nov 1, 2010
39,957
54,785
Right behind you!
I think after 3 months of no posting threads should automatically be locked.

Sent from my SPH-D700 using XDA App
 

MДЯCЦSДИT

Inactive Recognized Developer
Nov 21, 2010
6,563
4,616
With people thinking we are the epic touch... they will think this is new...

My actual reaction: omg, a new tar! ............ oh.

Sent from my SPH-D700 using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 42
    They live in the Netherlands, it 5:30 pm over there.
    Yes, they might have EF10 soon.
    They leak it from Samsung's Firmware update server and/or their sources from Samsung.

    XDA RULES STILL APPLY HERE.
    EF02 download: http://hotfile.com/dl/121177556/170dbb6/D700EF02.rar.html
    to password to unzip files: samfirmware.com

    To get cwm 3.1..0 recovery working and su, you need to flash this tar.
    Put the tar in pda:
    http://drockstar.devphone.org/EpicTar/cwm3.1.0.1.tar.md5
    Flash su.zip through clockwork:
    www.holylivingfuck.com/Stuff/su.zip

    ***do not use kernel debug tar** (if even posted in the video)

    http://www.youtube.com/watch?v=YLMlYuwTj6w

    DO NOT FLASH THE DEBUG.TAR
    IT FOR DEBUGGING PURPUSES ( it will eat baby and turn them into undead)

    Another install instruction: http://xdaforums.com/showpost.php?p=14827861&postcount=391
    7
    Here's what worked for me:

    Using a Palm Pre micro USB cable (since the Sammy cable sucks as we know.) Blackberry cables seem to work well as well, but YMMV.

    - Turn off phone
    - 3 Button boot into ClockWorkMod and make a backup ([Vol Down]+[Camera]+[Power] Buttons)
    - Reboot phone, backup with Titanium Backup (for easy app install later)
    - Turn phone back off once that backup is complete
    - Press and hold the hardware [1] key (on the physical keyboard) while pressing the [Power] button. This will put it in download mode with the alien shoveling something...
    - Open Odin3+v1.61.exe and press the PIT button, and select "victory_8G_100528.pit", press the PDA button and select "SPH-D700-EC05-8gb-REL.tar". I left auto-reboot checked, and EVERYTHING else UNCHECKED. (Make sure Odin recognizes your phone is plugged in; it will show a com port listed and highlighted in yellow.)
    - Press start and wait. If it doesn't get past factory.rfs, unplug everything, leave phone powered off with battery removed for at least 30 seconds, exit odin, and try again, if it still doesn't, use a different USB cable, try another USB port, if it still doesn't, use a different computer.
    - When Odin is done, it will reboot your phone. Disconnect the USB cable, close Odin 1.61.
    - Make sure "su.zip" is on your SD card (if you haven't already done so, transfer it now)
    - Now, turn the phone back off, and boot into download mode ([1]+[power] buttons)
    - Open Odin3 v1.81.exe and put "victory_8G_100528.pit" in the PIT field, and "SPH-D700-EF02-8Gb-REL.tar.md5" in the PDA field (leave the md5 extension, it is needed on this file.) Again, leave auto-reboot checked, and make sure everything else is unchecked and Odin recognizes the COM connection.
    - Press start and wait. After phone reboots again, disconnect USB cable.
    - Once phone is all the way booted, and SD scan is complete, go to: Menu>Settings>About Phone>System updates>Update Firmware to search for EF10 modem. My phone actually has an "Internal Error" during this step, so I am only on EF02 modem, but everything seems to work ok so far.
    - After the EF10 update, the phone will ask to check again and tell you to update to EF02, but just dismiss the notification. (Will pop up after each reboot AFAIK.)
    If you lose the Baseband and Hardware Versions during this step, and get into Airplane mode, start over from the beginning, and skip this step.
    - Once that is done, turn the phone off again, and boot into download mode again ([1]+[power] buttons)
    - In Odin 1.81, click reset, then click the PDA button, find your "cwm3.1.0.1.tar.md5" file, and right click>rename the file to remove the .md5 extension, then click Open. This will put the "cwm3.1.0.1.tar" in the PDA field.
    - Make sure auto-reboot IS checked, and everything else is unchecked, then click Start and wait. (I didn't use a PIT file in this step, so don't worry about it, it will work whether or not you use one.)
    - Once this is done, your phone will reboot, after it is done rebooting, turn it off, then boot into CWM with the 3-button boot ([Vol Down]+[Camera]+[Power] Buttons)
    - Install the su.zip file then go back and reboot the phone (again.)

    Once your phone boots up, you will be on EF02 and rooted.
    I then went into Market, downloaded Titanium Backup, and updated busybox, then batch restored with "Restore missing apps with data" to allow the phone to install the missing apps. Then one more simple reboot for good measure.

    I had to do it this way because it just would not work coming from SRF1.1.1 for me. I tried every USB port, and cables known to work fine Odin'ing back to EC05, so I figured I would try to do just that, get back on EC05, and try it from a "stock build". My guess is that the EXT4 system was upsetting it, but I'm not a dev, so I can't be sure.

    I was curious to see what EC05 would say with Update Firmware, but I still got the "Internal Error" even on a fresh EC05 install, so I think there may be something wrong with my phone. (Unless someone knows why mine did that even on a stock build, same error pops up with Update Profile and Update PRL.)


    I hope this helps at least ONE person out with getting this to work.
    4
    There are a million causes to support, all equally important to any number of people, but I don't really think this is the place to continually post it, over, and over, and over, and over, and over. I got the message quite a while ago, and I'd have to say the more it gets thrown into where it doesn't belong, it starts to wear a little on the annoying side. It does more harm than good to throw it all over the place. You're passionate about it, but not everyone's cause is yours. If your intention is to bring positive awareness, I think you're treading the boundary where it can do more harm than good.

    There are numerous venues for your enthusiasm, but this is a cell phone forum, and that's really what people expect to find here. I had to say something as I feel you're doing more harm than good.

    Had to say something. Think your an asshat. Just my opinion.
    4
    to get cwm 3.1..0 recovery working and su, you need this flashable tar.

    http://drockstar.devphone.org/EpicTar/cwm3.1.0.1.purple.tar.md5
    for root install www.holylivingfuck.com/Stuff/su.zip
    rename it to .tar