So there have been a spate of people bricking their O3Ds lately... this is the last ditch method to recover your phone if you can't boot into Android, or CWM. No guarantees, but should work so long as your phone is still detected.
Download SmartFlash, then the corresponding packages for your phone:
---P920---
Baseband: http://d-h.st/xci
Baseband Mirror: http://goo.gl/yDnjP
Rom: http://d-h.st/WTE
Rom Mirror: http://goo.gl/UfG85
---P925---
Baseband: http://d-h.st/EBF
Baseband Mirror: http://goo.gl/mdLBn
Rom: http://d-h.st/gTO
Rom Mirror: http://goo.gl/auYkj
Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
If you downloaded the rom from my dev-host link, unzip the .bin file.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls or LGP925_CP.fls for CP bin and LGP920_AP.bin or LGP925_AP.bin for AP bin, depending on your phone model. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a working phone on v21E (P920) or v20P (P925) stock
Download SmartFlash, then the corresponding packages for your phone:
---P920---
Baseband: http://d-h.st/xci
Baseband Mirror: http://goo.gl/yDnjP
Rom: http://d-h.st/WTE
Rom Mirror: http://goo.gl/UfG85
---P925---
Baseband: http://d-h.st/EBF
Baseband Mirror: http://goo.gl/mdLBn
Rom: http://d-h.st/gTO
Rom Mirror: http://goo.gl/auYkj
Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
If you downloaded the rom from my dev-host link, unzip the .bin file.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls or LGP925_CP.fls for CP bin and LGP920_AP.bin or LGP925_AP.bin for AP bin, depending on your phone model. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a working phone on v21E (P920) or v20P (P925) stock
Last edited: