FORUMS
Remove All Ads from XDA

[TUT] Flashing your First GSM 512LEO Rom - With HSPL4 (For Noobs)

12,328 posts
Thanks Meter: 16,151
 
By mskip, Retired Senior Moderator on 31st December 2009, 03:57 PM
Post Reply Email Thread
6th July 2012, 04:21 PM |#1591  
samsamuel's Avatar
Senior Member
Thanks Meter: 1,055
 
More
Quote:
Originally Posted by naruto8019

I need to send the mobile phone back for repair in warranty. I flashed it back to stock italian RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship but I still see there is hspl 2.08 on it... Can I use this tool to put the original spl? what kind of spl should I choose with this 3.14 rom? 2.08?
Thank you in advance for the answers

well spotted, it would have stopped warranty.
you flashed it over usb, which doesnt replace the spl.

correct - use hspl4 and choose 3.03.0000 in the dropdown.
 
 
6th July 2012, 06:07 PM |#1592  
Junior Member
Thanks Meter: 0
 
More
Ops!! Unfortunatelyit lead something error, here it written in booting loader:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP (LED) 0X50
MicroP(touch) 0×50
and then in the green olor written: upgrade ROM ode error please try again.

so, what should i do, is there any easy step to erase all this data?
task 29 doesn't work... any other stock rom doesn't work either
6th July 2012, 06:53 PM |#1593  
samsamuel's Avatar
Senior Member
Thanks Meter: 1,055
 
More
DaDoesn't really matter, , warranty should be valid so long as the spl is stock, which 3.03.0000 is.
However if you wanna get it right, take the 3.14rom.exe, right click it and choose open with winzip (or winrar, or 7zip, whatever you have installed) or rename it to change .exe to .zip then double click to open it.
Inside are several files, find ruu_signed.nbh rename it to leoimg.nbh, put it on SD card and reboot into bootloader, where it should flash. If you get an error, you chose the wrong rom.

Task 29 needs hspl, and other roms that fail are the wrong rom.
You didn't need to reflash the rom, setting 3.03.0000 with hspl4 and rebooting would have been enough.

As I said, rom error means you need a different rom, example if the phone is from vodaphone Germany, it will only accept voda Germany roms, , , o2 UK will only take o2 UK roms.
However, you could...
Hspl4 --> 3.03.hspl
Flash any 3.14 rom using USB
Hspl4 again --> 3.03.0000
Reboot, done.
8th September 2013, 03:53 PM |#1594  
Junior Member
Thanks Meter: 0
 
More
I am following the procedure with my HTC HD2 to install HSPL (im in bootloader with volume down), launching HSPL3 (i tried HSPL4 too) to install HSPL 2.08, no problem during this phase.

After that, im still following the guideline and flashing for Radio 2.14.50.04 (MD5: BC9F1C294766F0CB2EDD3EBD5860D9CA) with CustomRUU.exe, but it always freezes @ 96% with error 262

The only file i can use for flashing is RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, but after that, the phone only boots in bootloader (even with no volume down pressed at boot), impossible to go further. Installing MagLdr after that is useless, cannot boot in MagLoader, only bootloader...

Help would be appreciated pls



NB: Phone is French / Orange.
7th December 2013, 06:43 PM |#1595  
billybag's Avatar
Senior Member
Thanks Meter: 23
 
More
i dont have a "system" option in my settings..... stock rom. windows 7.5
30th March 2014, 09:47 PM |#1596  
karo222's Avatar
Senior Member
Thanks Meter: 46
 
More
Hi
All options On Magldr is gone . Can you help me please ?



13th September 2014, 04:30 PM |#1597  
Senior Member
Thanks Meter: 1
 
More
rom update error 270
Quote:
Originally Posted by mskip

PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS OR LOOK AT *THIS* THREAD THANKS TO RZASHARP

ALSO DEFINITELY CHECK OUT THE COMPLETE VIDEO GUIDE TO EVERYTHING *HERE* THANKS TO [★]

This Guide is designed ONLY for HD2 with 512 Mbytes ROM. If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.


If you have a LEO with 1024MB ROM then please use *THIS* guide.

Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!

PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)

*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*

*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver (on your pc) activate*

Any of these can lead to a bad flash and possibly brick your phone

*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS OR RADIOS*

1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE

--------------------------------------------------------------
--------------------------------------------------------------

2. FLASH HARDSPL (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)

The Original HardSPL Thread is *HERE*


NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE:
Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)

Installing HardSPL4 via ActiveSync with USB Lead (thanks to Bepe)

Note: HardSPL CANNOT be installed via microSD Card.

IMPORTANT: To install/uninstall this HSPL3 there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.0000, SPL 3.03.000

To Uninstall you can flash a Stock ROM via SD card or use HSPL3 application (You need select 2.08.0000 or 3.03.0000 in the choose screen)

1. Download HardSPL4 package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run
HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next
in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between
2.08.HSPL 2.08.0000 HSPL3.03.0000 or 3.03.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*

Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR


6. Select 2.08.HSPL OR 3.03HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.


NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.

*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows the SPL or HardSPL you installed*

--------------------------------------------------------------
--------------------------------------------------------------

To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes

You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*

- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash

--------------------------------------------------------------
--------------------------------------------------------------

3. DOWNLOAD AND FLASH YOUR PREFERED ROM

NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.

Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe
from the Roms Folder (if one isnt included then download it *HERE*)
5
. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.

Flashing Via MicroSD Card

NOTE (PLEASE READ):
If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!

1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.

--------------------------------------------------------------
--------------------------------------------------------------

4. FLASH PREFERED RADIO (OPTIONAL)

For more information about compatible Radios go *HERE*

Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions
(if one isnt included then download it *HERE*)

Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card

--------------------------------------------------------------
--------------------------------------------------------------

5. JOB DONE. Well Done YOU DID IT!!


Useful Information

How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.

How to perform a HardReset
Hard Resetting deletes ALL personal data and settings and restores your phone to factory default conditions as if you turned on the phone for the first time after purchasing.

1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap Menu > All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

Make sure you back up all your data such as Contacts, Appointments, messages etc or they will be gone forever.


*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

please help me
i am having htc hd2 leo 512 mb
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
when i boot it show white screen
when i flash thru dft or nand it give me
rom update error 262
when i wipe task 29
Please help me how to solve this
when i check thru internet it show cid lock error
how to solve last 1 year i am suffering with out any solution
13th September 2014, 05:16 PM |#1598  
hitman1376's Avatar
Senior Member
Flag zanjan
Thanks Meter: 426
 
Donate to Me
More
Quote:
Originally Posted by nagagaya

please help me
i am having htc hd2 leo 512 mb
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
when i boot it show white screen
when i flash thru dft or nand it give me
rom update error 262
when i wipe task 29
Please help me how to solve this
when i check thru internet it show cid lock error
how to solve last 1 year i am suffering with out any solution

Dear friend ... install HSPL 4
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes