Sounds like we need to get this guy a phone
Sent from my PG86100 using xda premium
Sorry Guys
I drop my phone.. It was broked.
So I don't have any Android phone again.
For now I will stop the development until I got a new phone (don't know when)..
Thanks for all of support
And keep the Android Development Alive...
Bye
###
#
# Check if reboot checkbox was checked
if
getvar("reboot_it")=="1"
then
#
# reboot("onfinish"); - Reboot if anything finished
# reboot("now"); - Reboot Directly
# reboot("disable"); - If you set reboot("now") before, use this command to revert it.
#
reboot("onfinish");
endif;
#---- FINISH
i get error at last line of script here:
tnksCode:### # # Check if reboot checkbox was checked if getvar("reboot_it")=="1" then # # reboot("onfinish"); - Reboot if anything finished # reboot("now"); - Reboot Directly # reboot("disable"); - If you set reboot("now") before, use this command to revert it. # reboot("onfinish"); endif; #---- FINISH
Hello amarullz,
Already, i say you: "Thanks, it's really a great work, there aren't words for qualify your genius!"
I would like to know if it exist a command for see if an application is here or not.
And too, if it's possible of ask question at installation (yes/no), precisely related to the question above?
Many regards!
[b]IN AROMA-CONFIG[/b]
"ARE YOU STRAIGHT OR GAY?","",2,
"YES",
"This will install a gay theme", 1,
"NO",
"WARNING: This is for straight people only",0,
[b]IN UPDATER-SCRIPT[/b]
# THEME
if
file_getprop("/tmp/aroma-data/mods.prop","selected.1") == "1"
then
ui_print("@ Installing Gay Theme");
package_extract_dir("customize/theme/gay_theme", "/");
endif;
if
file_getprop("/tmp/aroma-data/mods.prop","selected.1") == "2"
then
ui_print("@ Installing Straight Theme");
package_extract_dir("customize/theme/straight_theme", "/");
endif;
if ( (prop("customize.prop","item4.4")=="1") && (prop("customize.prop","item 4.5")=="1") ) then
alert(
"Oh-oh!",
"You have chosen both Google music & Google Music Inverted!\n\n"+
"Since this is the same app but just themed, only the normal google music will be installed.\n\n"+
"Press OK & then press back if you want to change this!",
"@info"
);
endif;
"Music Players", "", 2, #-- Group 4. key = "item.4.x"
"CM9 Player", "A porting of CM9 Music Player", 0, #-- item.4.1 = Selected by default
"MiuiV4 Player", "Miui Official Player", 0, #-- item.4.2 = Un-Selected by default
"Apollo!", "New! Music Launcher with black Theme", 1, #-- item.4.3 = Un-Selected by default
"Google Music", "Standard Google Player", 0, #-- item.4.4 = Un-Selected by default
"Google Music Inverted", "Inverted Google Player", 0 #-- item.4.5 = Un-Selected by default
this is my aroma-config file. I have an error on the last row...
htttp://pastebin.com/VcFLkPmF
(remove a t on htttp)
Hey guys,
Terrible 'bout your phone Amarullz !
I got a question, I made this bit of code for the AROMA-config file, however it doesn't work.
Code:if ( (prop("customize.prop","item4.4")=="1") && (prop("customize.prop","item 4.5")=="1") ) then alert( "Oh-oh!", "You have chosen both Google music & Google Music Inverted!\n\n"+ "Since this is the same app but just themed, only the normal google music will be installed.\n\n"+ "Press OK & then press back if you want to change this!", "@info" ); endif;
Selection code:
Customize.prop
Code:"Music Players", "", 2, #-- Group 4. key = "item.4.x" "CM9 Player", "A porting of CM9 Music Player", 0, #-- item.4.1 = Selected by default "MiuiV4 Player", "Miui Official Player", 0, #-- item.4.2 = Un-Selected by default "Apollo!", "New! Music Launcher with black Theme", 1, #-- item.4.3 = Un-Selected by default "Google Music", "Standard Google Player", 0, #-- item.4.4 = Un-Selected by default "Google Music Inverted", "Inverted Google Player", 0 #-- item.4.5 = Un-Selected by default
Anyone have an idea why :/?
Stoux
if (prop("customize.prop","item4.4")=="1") && if (prop("customize.prop","item 4.5")=="1") then
Sorry, but this doesn't solve my errorProbably caused by the 2 missing brackets below:
setvar ("data_total", getdisksize("/data","m"));
setvar ("data_free", getdiskfree("/data","m"));
if (prop("type.prop","selected")=="1") then
if prop("type.prop","selected")=="1" then
Try putting parenthesis around the functions in your if statements in the aroma-config (not needed in the updater-script).
Example:
Code:if (prop("type.prop","selected")=="1") then
This might not work (at least for me... not sure why?):
Code:if prop("type.prop","selected")=="1" then
I believe it should be:
Code:if (prop("customize.prop","item4.4")=="1") && if (prop("customize.prop","item 4.5")=="1") then
[LEFT]
* [B]CEMPAKA- 1.63 - BUILD 120306-032[/B]
* Add support for atmel_maxtouch (Down Event SYN) - Asus Transformer Prime Touch Screen
* [B]CEMPAKA- 1.62 - BUILD 120303-030[/B]
* Fix some memory leaks ([COLOR="Red"]Important[/COLOR]).
* Add ini_set("[COLOR="Green"]force_colorspace[/COLOR]","rgba");
* [B]CEMPAKA- 1.60 - BUILD 120227-026[/B]
* Add msb_right check for Endianess video memory
* Fix Installer text log drawing
* Add ini_get
* Add rom_date in ini_get
* Fix reboot and back function
* Add more and recreate Icons for themes and generic
* Rewrite text handler
* Add alignment, indentation and list in AROMA Markup String
* Change temp directory to /tmp/aroma, /tmp/aroma-data stil works
* Add Theme Support
* Add AROMA Markup for <b> Bold
* Add More Colorset
* Add More Text to Customize
* Add PNG Icon Load From Theme (Default Icons)
* Add Tab support in AROMA Markup String
* Change int to long for partition info, now support big storage information
* Config Init All/Theme Only
* Recreate new example (release) for binary release
* Customizable Font Runtime
* Reformat About Dialog
* Add show progress per time in installer (now support by files and by time).
* Themeable Progressbar
* Enhance Exec Functions to return exit status and autosave buffer into variable
* Fix glibc error in ag_close - Need workaround
* Move ai_trim to system libs
* Add Stretch function for png
* Add 9 Patch drawing function for png
* Fix Reboot Function
* Add Alternative Touch Method
* Add ziptotmp & restotmp
* Add support for mxt224 touch screen (SYN_MT_REPORT event)
* [B]BOUGENVILLE - 1.10 - BUILD 120208-13[/B]
* Add Alternative Touch Method
* Added New Functions
- anisplash - ANIMATED SPLASH SCREEN
- prop - GET PROP FROM AROMA TMP
- zipprop - GET PROP FROM ZIP
- resprop - GET PROP FROM AROMA RESOURCE ZIP
- sysprop - GET RECOVERY PROP
- property_get - GET RECOVERY PROP
- write - WRITE STRING INTO FILESYSTEM
- readtmpfile - READ TEMPORARY FILE AS STRINF
- read - READ FILESYSTEM AS STRING
- zipread - Read String From Zip
- resread - Read Strinf From Resource
- zipexec - Exec Program From Zip
- resexec - Exec Program From Resource
- run_program - Run Program/Exec
- exec - Run Prohram/Exec
- back - BACK TO PREVIOUS WIZARD
- reboot - REBOOT DEVICE
* Deprecated Funcrions
- readfile - Will Renamed to zipread
- readfile_aroma - Will Renamed to resread
* Add Some Fix in Touch Up Handler
* Prop parsing, File Handling & Zip Handling has been managed in efficient functions
* Remove CERT.SA - Not Needed
* Add Licence Headers in all aroma source code Apache 2.0
* Add More Comments & Documentation in Souce Code
* Renamed functions for fit needs
* [B]ANGGREK -1.00 - BUILD:120204-011[/B]
* Fix calibrating function not working when set in aroma-config
* Update and fix firmware command from update-binary-installer into recovery.
* [B]ANGGREK -1.00 - BUILD:120202-10[/B]
* Improve touch handler compatibility. Now more accurate in every devices
* Add more chars into ROM Infos from only 31 to 63max
* Detail changelog from commit: [URL="https://github.com/amarullz/AROMA-Installer/commit/f49e2969e3b3514e180dcb15bed5a48298b19046"]10[/URL]
* [B]ANGGREK -1.00 - BUILD:120201-009[/B]
* Stride/Pitch/Padding Framebuffer support for non multiply 8 screen size like qhd on sensation and evo3d
* Rewrite input handler, better keys & touch screen compatibility.
* Change calibration division data from integer to float, more accurate calibrating
* Improve fling and scrolling engine
* Add support for all possible screen bit depth 32/24/16bit. ARGB, ABGR, RGBA, BGRA. No problem now.
* Detail changelog from commit: [URL="https://github.com/amarullz/AROMA-Installer/commit/b9daae9151e6ec4e1054725722b6f507f621f065"]006[/URL], [URL="https://github.com/amarullz/AROMA-Installer/commit/65fdbb9a2f7c12a799f320b3759ab60d6b00d3b1"]007[/URL], [URL="https://github.com/amarullz/AROMA-Installer/commit/f49e2969e3b3514e180dcb15bed5a48298b19046"]009[/URL]
[B]ANGGREK -1.00 - BUILD:120129-005[/B]
* Remove Signature Check - Now You don't need to sign aroma-config and updater-script
* Calibration Tool now show before anything, so you can directly do calibration. you can disabled it in aroma-config by deleting [B]calibtool("");[/B] command.
* Fix some touch screen input handler
* Add 229 in menu keycode (F2 used in emulator as menu key)
[B]ANGGREK -1.00 - BUILD:120128-004[/B]
* Open Source - Binary No Released
[B]ANGGREK -1.00 - BUILD:120126-003[/B]
* Refer to defy recovery source code found [URL="https://github.com/CyanogenDefy/android_device_motorola_jordan/blob/gingerbread/recovery_ui.c"]HERE[/URL] (Thanks [URL="http://xdaforums.com/showthread.php?t=1356767"]walter79[/URL] for github source code) I add some keycode into input reader : [URL="http://xdaforums.com/showpost.php?p=21826756&postcount=32"]Read Here[/URL]
* Add confirmation if calibrated data will be used in current process (After Calibrating) - So you can try touchscreen without editing [COLOR="Green"]aroma-config[/COLOR] after you calibrate it.
* Remove precision calculation in scrolling thread (Natural calculation but less fluid)... Feel faster now.
* Add function for [COLOR="Green"]aroma-config[/COLOR] to define custom key code for up/down/select/back/menu, just like [COLOR="Green"]calibrate()[/COLOR] function. with format like this: [COLOR="DarkRed"]ini_set("customkeycode_up",130);[/COLOR] or [COLOR="DarkRed"]ini_set("customkeycode_select",13);[/COLOR], the keycode can be capture by [URL="http://xdaforums.com/attachment.php?attachmentid=872892&d=1327550395"]aroma-keycapture-flashable.zip[/URL]
[B]ANGGREK -1.00 - BUILD:120125-002[/B]
* Add Home & Power Button To Select Items
* Unsigned Script Now Not Terminated Installer, but just show Alert That the script should be signed to pass install ui
* Add More Documentation in aroma-config
[B]ANGGREK -1.00 - BUILD:120124-001[/B]
* Initial Release ( AROMA UI, AROMA Touch Handler, AROMA Markup String )
* Customizable ( Custom Theme Colors, Customizable Fonts and Images )
* Optimized Build ( Static, -o2, remove unused functions, remove png-write and zlib deflate functions )
[/LEFT]
Prev Item/Up Key = 120
Next Item/Up Key = 110
Select Item/Enter/Select Key = 13
Back Key = 200
Menu Key = 193
##
# Custom Key Code - Usefull For Some Device which not used
# Standard key code for up/down/select/back/menu
#
# You can capture the keycode in
# recovery using "aroma-keycapture-flashable.zip" Available in
# AROMA Installer Thread.
#
# Press some key when it run, it will return key code,
# that key can override up/down/select/back/menu actions in
# AROMA Installer, you can even set your home key for up, or
# volume down for select item
#
#-------- Uncomment & Modify this Code:
#
# ini_set("customkeycode_up", "115");
# ini_set("customkeycode_down", "114");
# ini_set("customkeycode_select", "116");
# ini_set("customkeycode_menu", "139");
# ini_set("customkeycode_back", "158");
#
# Set Color with 3 chars hexcolor
setcolor("winbg", "#444");
setcolor("winbg_g", "#222");
setcolor("textbg", "#333");
setcolor("textfg", "#fff");
# Set Color with 6 chars hexcolor
setcolor("textfg_gray", "#bbbbbb");
setcolor("controlbg", "#446699");
setcolor("controlbg_g", "#223355");
# Set ROM Informations
ini_set("rom_name", "AROMA ROM");
ini_set("rom_version", "1.0");
ini_set("rom_author", "amarullz");
ini_set("rom_device", "HTC Desire (bravo)");
# Set Custom Text
ini_set("text_ok", "OK Man");
ini_set("text_next", ">>");
ini_set("text_back", "<<");
# Set Alternative Key Code - You can use keycapture tool
# to capture your device keycode
ini_set("customkeycode_up", "115");
ini_set("customkeycode_down", "114");
ini_set("customkeycode_select", "116");
ini_set("customkeycode_menu", "229");
ini_set("customkeycode_back", "158");
# HTC Desire Calibrated Data
calibrate("7.90","20","7.90","20");
# Alternative method Calibrated Data
calibration("1.8447", "37", "1.2158", "27", "yes");
# Start Calibrating Tools
calibtool("");
# Use ICS Theme located at:
# META-INF/com/google/android/aroma/themes/ics
theme("ics");
# Show "testvar" value in alert
alert(
"Value of testvar",
getvar("testvar")
);
# Set new value for "testvar"
setvar("testvar", "This is only test!!");
# Now Show the "testvar" value in alert
alert(
"Value of testvar",
getvar("testvar")
);
# Set new value for "testvar"
setvar("testvar", "This is only test!!");
# Append new value
appendvar("testvar", "Add String");
# "testvar" now will contain "This is only test!!Add String"
# Set new value for "testvar"
setvar("testvar", "This is only test!!");
# Prepend new value
prependvar("testvar", "Add String!! ");
# "testvar" now will contain "Add String!! This is only test!!"
# Get value of "item.1.1" from /tmp/aroma-data/custom.prop
alert(
"Value of Prop",
file_getprop("/tmp/aroma-data/custom.prop", "item.1.1")
);
# Get value of "item.1.1" from /tmp/aroma-data/custom.prop
alert(
"Value of Prop",
prop("custom.prop", "item.1.1")
);
# Get value of "item.1.1" from META-INF/com/google/android/aroma/custom.prop
alert(
"Value of Prop",
zipprop("META-INF/com/google/android/aroma/custom.prop", "item.1.1")
);
# Get value of "item.1.1" from META-INF/com/google/android/aroma/custom.prop
alert(
"Value of Prop",
resprop("custom.prop", "item.1.1")
);
# Get Device Board Name
alert(
"Device Board Name",
sysprop("ro.product.board")
);
# Get Board Platform
alert(
"Device Board Name",
property_get("ro.board.platform")
);
# It will saved in from /tmp/aroma-data/test.txt
writetmpfile("test.txt", "This is test text");
# Show the content in alert with readtmpfile
alert(
"Value of test.txt",
readtmpfile("test.txt")
);
# Show the content in alert with read
alert(
"Value of test.txt",
read("/tmp/aroma-data/test.txt")
);
# It will saved in from /sdcard/test.txt
writetmpfile("/sdcard/test.txt", "This is test text");
# Show the content in alert with read
alert(
"Value of test.txt",
read("/sdcard/test.txt")
);
# It will read data from /tmp/aroma-data/test.txt
# then save it in variable
setvar(
"testvar",
readtmpfile("test.txt")
);
# It will read data from /sdcard/test.txt
# then save it in variable
setvar(
"testvar",
read("/sdcard/test.txt")
);
# It will read data from zip content "META-INF/com/google/android/aroma/text.txt"
# then save it in variable
setvar(
"testvar",
zipread("META-INF/com/google/android/aroma/text.txt")
);
# It will read data from zip content "tmp/text.txt"
# then save it in variable
setvar(
"testvar2",
zipread("tmp/text.txt")
);
# It will read data from zip content "META-INF/com/google/android/aroma/text.txt"
# then save it in variable
setvar(
"testvar",
resread("text.txt")
);
# It will extract "tmp/busybox" into "/tmp/aroma-data/busybox"
ziptotmp("tmp/busybox", "busybox");
# Now we can execute it
exec("/tmp/aroma-data/busybox","ls","-l");
# It will extract "META-INF/com/google/android/aroma/busybox" into "/tmp/aroma-data/busybox"
restotmp("busybox", "busybox");
# Now we can execute it
exec("/tmp/aroma-data/busybox","ls","-l");
# It will extract and run "META-INF/com/google/android/aroma/test.sh"
zipexec("META-INF/com/google/android/aroma/test.sh");
# With Arguments
zipexec("META-INF/com/google/android/aroma/test.sh", "argument1", "argument2");
# Get Return Status
if
zipexec("META-INF/com/google/android/aroma/test.sh") == "0"
then
alert(
"Exec Status",
"Shell was executed successfully"
);
endif;
# Get STDOUT
zipexec("META-INF/com/google/android/aroma/test.sh");
alert(
"Exec STDOUT",
getvar("exec_buffer")
);
# It will extract and run "META-INF/com/google/android/aroma/test.sh"
resexec("test.sh");
# With Arguments
resexec("test.sh", "argument1", "argument2");
# Get Return Status
if
resexec("test.sh") == "0"
then
alert(
"Exec Status",
"Shell was executed successfully"
);
endif;
# Get STDOUT
resexec("test.sh");
alert(
"Exec STDOUT",
getvar("exec_buffer")
);
# It will run "ls" command
run_program("/sbin/ls");
# or
exec("/sbin/ls");
# With some Arguments
run_program("/sbin/ls", "-l", "/sdcard");
# Mounting Device
exec("/sbin/mount", "-t", "auto", "/system");
# Get Return Status
if
exec("/sbin/mount", "-t", "auto", "/system") == "0"
then
alert(
"Exec Status",
"Mount was executed successfully"
);
endif;
# Get STDOUT
exec("/sbin/ls", "-l", "/sdcard/*.zip");
alert(
"List of Zip in SDCARD",
getvar("exec_buffer")
);