Can someone tell me will this kernel work with newest miui.us rom for hd2? I dont want to install everything again if it fails...
Sent from my HTC HD2 using fingers
Sorry!!!
This kernel works with this rom!!!
I just downloades the wrong one!!!
I tryed withe non Gingerbread and it's fantastic : smooth, speed, boot time...
Thank you!!!
Cannot download the kernel, Multiupload is down...
Please re-upload..
Advance Thanks!!
I second this, could someone re-upload all the versions of the 2.0 kernel somewhere?
Thanks!
1,5Ghz OC, Undervolted, Extended Battery Support and much more
- Based on master linux_on_wince_htc http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc and always keept updated to it
- G-Sensor freeze patch and other small fixes
- Patched with 1.5Ghz OC capability
- Patched SMARTASS Governor to be more battery saver
- Default speeds: 245 - 998 mhz
- Default governor: interactive
- Default undervolted to 925mV
- SysFS interface to custom undervolt or overvolt (see post 2 for help), credit: -snq
- Full cLK support, credit Cedesmith
- Full support of two-way call recording, via external app (see here http://xdaforums.com/showthread.php?t=993793 )
- Patched for BT high-battery drain on GB builds (your rom must support it in init.rc! read here http://xdaforums.com/showthread.php?t=1007774
- Fully working HTC Headset support
- Wi-Fi MAC address fix
- Yaffs, Ext2, Ext3, Ext4, CIFS, UTF-8
- RMNET as module
- IEEE 802.1x/EAP authentication and Native Wifi-tethering (on GB/AOSP builds using the GB version)
- Extended Battery Support (only original HTC EB 2300mAh) credits: Arne
- My entire code, config, build script are stored on GIT. No unuseful diff files, no unuseful zips with configs.. just clone the git repo and you can see everything, launch the script and build your own clone.
- For who cares, config and commits logs are also stored in the zip in the "devs" folder
My git repo: http://gitorious.org/~rafpigna/linux-on-wince-htc/rafpigna_linux_on_wince_htc
Code:2.0 OC GB Added two way call recording support (http://xdaforums.com/showthread.php?t=993793) Patched for high BT drain on GB builds (remember that to have this working, your rom must support it in init.rc! read here http://xdaforums.com/showthread.php?t=1007774 ) Merged to master branch 2.0 OC Added two way call recording support (http://xdaforums.com/showthread.php?t=993793) Patched for high BT drain on GB builds (remember that to have this working, your rom must support it in init.rc! read here http://xdaforums.com/showthread.php?t=1007774 ) Merged to master branch 1.9 OC GB [B]only for Gingerbread builds[/B] Cleaned and tweaked Wifi drivers from tytung repo Merged to master git Added default UV to 925mv for more battery saving Sysfs interface to custom control the UV parameters via shell or script Added more cpu frequency steps, for improved smoothness and battery saving Added Extended Battery support from Arne code. (HTC Original EB 2300mah) Added multiport support Added full cLK support including boot-to-recovery Included again "01modules" in the zip file to avoid losing data. 1.9 OC Merged to master git Added default UV to 925mv Sysfs interface to custom control the UV parameters via shell or script Added more cpu frequency steps Added Extended Battery support from Arne code. (HTC Original EB 2300mah) Added multiport support Added full cLK support including boot-to-recovery Included again "01modules" in the zip file to avoid losing data. 1.8 OC NO SENSE Merged with linux_on_wince_htc to apply last commits http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc [fixed netfilter errors and missing dependencies] Danijel Added tytung AOSP wifi drivers and wpa_suplicant to enable IEEE 802.1x/EAP authentication and native wifi thetering on GB/NO SENSE builds [B]Credit for this fix goes to TYTUNG[/B] 1.8 OC Merged with linux_on_wince_htc to apply last commits http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc [fixed netfilter errors and missing dependencies] Danijel 1.7 (new temporary branch: NEWOC) Added BFQ as default scheduler, TinyRCU, LZMA [from huanyu] Tweaked Interactive governor [from huanyu] Other small tweaks (see git) 1.6 Merged to master http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc [g-sensor calibration fix (no more facedown needed)] - Markinus 1.5 Fixed 245000 min frequency typo 1.4 Added no-oc on boot to avoid rebooting issues 1.3 Fixed low cpu values that causes drop of phone signal. 1.2 Tweaked Smartass governor Set INTERACTIVE as default governor 1.1 Some cleanups 1.0 Added OC + Smartass governor
Donations:Flash via ClockWord Recovery
I will not provide other formats
If you have issues flashing or something not works after flashing, check with your build chef if this zip is compatible with the partitions used by your build.
2.0 OC
This is working for all froyo/gb/aosp builds, but if you want max performance on Gingerbread, use the GB version
http://www.multiupload.com/H6TP0LFVJX
2.0 OC GB
This is working only on Gingerbread builds. Includes a wpa_suplicant file that will be pushed in your /system/bin folder to enable IEEE 802.1x/EAP authentication and native wifi tethering
http://www.multiupload.com/QV7AHSKTC9
Old versions:
1.9 OC
http://www.multiupload.com/AVBKLQSITQ
1.9 OC GB
http://www.multiupload.com/14RSYK5B28
1.8 OC
http://www.multiupload.com/OGY9NC4M75
1.8 OC GB
http://www.multiupload.com/SRW5CN4OIS
1.7
http://www.multiupload.com/LW7P00W69F
1.6
http://www.multiupload.com/ISZNS4LFH2
1.5
http://www.multiupload.com/NTBNV4EGGN
I dont ask donations for this because mainly is based on the work from others and they deserves more than a "thanks". But since I put some efforts in this, would be nice if you can click on my "thanks" button to show you are thankful for this work
Anyway if you still want to offer me a coffe, it's appreciated.
usage:
query: (output: first column: frequency (kHz), second column: vdd* (mV))
incrementing/decrementing all levels by a specified amount* (mV):Code:cat /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels 128000: 950 245000: 950 384000: 975 422400: 975 460800: 1000 499200: 1025 537600: 1025 576000: 1050 614400: 1075 652800: 1100 691200: 1125 729600: 1150 768000: 1175 806400: 1200 844800: 1200 883200: 1225 921600: 1225 960000: 1250 998400: 1275 1036800: 1275 1075200: 1275 1113600: 1300 1152000: 1300 1190400: 1300
adjusting the supply voltage* (second value, mV) at a specific frequency (first value, kHz):Code:echo '-25' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels echo '+25' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
*: vdd values must be a multiple of 25 (enforced by the interface; the regulator doesn't accept other values - found out in the hard way)Code:echo '998400 1250' > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
please note that the values set through this interface will only be written to the acpu table - they will only become effective when the specific frequency is (re)set by cpufreq
i took the input parser from iscaela's code - thanks for it
do not apply this patch if you plan to use avs
to query the constraints of the regulator ("max_microvolts", "min_microvolts") or the voltage currently supplied to the cpu ("microvolts" (uV)):
Code:grep '.' /sys/class/i2c-adapter/i2c-0/0-0048/regulator/regulator.0/*