G900AUCS4DQD1 ** FULL ODIN UPDATE ** v6.0.1

Search This thread

toutanje

Member
May 7, 2006
23
109
Hello everyone, here is the latest G900AUCS4DQD1 full Odin update. With this, you may update from ANY version you currently have such as 4.4.4, 5.0, 5.1.1, or 6.0.1. Simply flash all 4 files after you extract using Odin and you will be on the latest and newest update. This WILL wipe your phone so make sure you backup your phone.

G900AUCS4DQD1 (6.0.1) - https://www.androidfilehost.com/?fid=529152257862725335

If for any reason you wish to downgrade, you can safely flash any of the following full Odin firmware's without any issue. Phone will hang after flashing on startup at AT&T logo. Simply boot into recovery and perform factory wipe/reset and it will boot up fine after that. After wiping data/resetting phone, it will look like it got stuck again on AT&T logo but give it a few minutes and it will eventually pass this time.

G900AUCS4DQC1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120723808
G900AUCS4DPH4 (6.0.1) - https://www.androidfilehost.com/?fid=312968873555011029
G900AUCS4CPA6 (5.1.1) - https://www.androidfilehost.com/?fid=24723757092307204
G900AUCU4COI5 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970945
G900AUCU4BOF3 (5.0) - https://www.androidfilehost.com/?fid=529152257862696776
 

bulletfodder

Member
Mar 7, 2010
30
7
So, what am I doing incorrectly?

Used S5 900A on OI5
Downloaded the full Odin QC1 file.
flashed with Odin 3.11
No error messages, flashed all 4 files.
Got immediately dumped to recovery after an error screen saying the phone couldn't access knox.
Reboot, and the phone shows stuck on 5.1.1, with a baseband of QC1. It appears to be still the 5.1.1 software/ui.
tried a factory reset from recovery, no joy.

Currently downloading QD1 Odin file, I will report back.


edit: after a second full flash of all 4 files, it worked. wierd. Now running QC1. will updated to QD1 via odin shortly.

disregard this post in it's entirety. :silly:
 
Last edited:
  • Like
Reactions: PokeFan919

loudlumi

New member
Jan 8, 2017
2
0
I just downloaded the 2.1Gb QD1 file, and the CRC check on the AP tar file says failed. Should I go ahead and flash my phone, is there any risk?
 

blackhatchl

Member
Dec 7, 2016
8
1
Downloaded the QD1 update without problems...now I wonder, how necessary is it ? since the phone is working fine.
 

Redhawk2000

Senior Member
Jun 1, 2016
846
463
Trying to download but getting "failed network error" for every mirror link.

Edit: Nevermind. Found the thread that allowed me to root it from OF3 which I didn't know was possible. Went that route instead.
 
Last edited:

Diabolical_Mir

Senior Member
Apr 9, 2007
64
6
Can I use this file and method to update from my Galaxy S5 G900A running 4.4.2? My device in not rooted and the bootloader is locked. It is in it's original factory state.
 

Diabolical_Mir

Senior Member
Apr 9, 2007
64
6
It seems that Samsung will not be providing any further updates, so my question is, will AT&T release Noughat for Samsung Galaxy 5 G900A or is that pipe dream at this point? I didn't want to create a new thread for just this question.
 
  • Like
Reactions: ahvamaria

Houdini111

New member
Jul 28, 2017
1
1
Thank you very much for this. After trying to root my device and failing, I couldn't get it back to normal. Hours of trying later and nothing worked, not even custom ROMs. I gave up and decided to go nuclear but still couldn't get it to work. Finally I found this, and it worked. Saved my bacon.
 
  • Like
Reactions: ahvamaria

Diabolical_Mir

Senior Member
Apr 9, 2007
64
6
Guys,

I was on Android 4.4.2 which was the way the phone came. I jumped from 4.4.2 straight to this update, and installed it via Odin. No issues with the update, everything works fine.

However, There is a lot of free space on the ROM "missing", and I don't know where it is and how I can release it.

The phone is a 16gB model. What is available is 11.4 gB (the remaining probably being the firmware and OS), but of that 11.4gB, I only have about 7.5 gB to use. What gives? Is it because Odin made some kind of backup on the ROM itself? I really really would appreciate some information on this.

Thanks,
Mir
 

eddieboy4

New member
Feb 21, 2015
2
4
Oldies Gratitude...

Hi, I just thought you might like to know that thanks to your post and clear instructions (i.e. not assuming the reader has an encyclopedic knowledge of the S5...) I have been able to update my AT&T S5, here in the UK from Android 5 to marshmallow with everything going very smoothly. The reason I thought to write this little note is because I was born in 1947, which makes me 70 years old, and when I was growing up, the idea of a mobile phone was science fiction, so if I can do it...!
So Thank you again for sharing your expertise....
 

ashiqnoorm

Member
Oct 22, 2016
11
1
Plz upload new link with mediafire or any other, this link giving error and give message error binary md5...
waiting....

Regard

Ashiq Noor.
 

ashiqnoorm

Member
Oct 22, 2016
11
1
Dear File is corrupt when extract through winrar or 7zip give error The file is corrupt. plz provide another link.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    Hello everyone, here is the latest G900AUCS4DQD1 full Odin update. With this, you may update from ANY version you currently have such as 4.4.4, 5.0, 5.1.1, or 6.0.1. Simply flash all 4 files after you extract using Odin and you will be on the latest and newest update. This WILL wipe your phone so make sure you backup your phone.

    G900AUCS4DQD1 (6.0.1) - https://www.androidfilehost.com/?fid=529152257862725335

    If for any reason you wish to downgrade, you can safely flash any of the following full Odin firmware's without any issue. Phone will hang after flashing on startup at AT&T logo. Simply boot into recovery and perform factory wipe/reset and it will boot up fine after that. After wiping data/resetting phone, it will look like it got stuck again on AT&T logo but give it a few minutes and it will eventually pass this time.

    G900AUCS4DQC1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120723808
    G900AUCS4DPH4 (6.0.1) - https://www.androidfilehost.com/?fid=312968873555011029
    G900AUCS4CPA6 (5.1.1) - https://www.androidfilehost.com/?fid=24723757092307204
    G900AUCU4COI5 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970945
    G900AUCU4BOF3 (5.0) - https://www.androidfilehost.com/?fid=529152257862696776
    4
    Oldies Gratitude...

    Hi, I just thought you might like to know that thanks to your post and clear instructions (i.e. not assuming the reader has an encyclopedic knowledge of the S5...) I have been able to update my AT&T S5, here in the UK from Android 5 to marshmallow with everything going very smoothly. The reason I thought to write this little note is because I was born in 1947, which makes me 70 years old, and when I was growing up, the idea of a mobile phone was science fiction, so if I can do it...!
    So Thank you again for sharing your expertise....
    1
    Thank you again for the files, appreciated!
    1
    So, what am I doing incorrectly?

    Used S5 900A on OI5
    Downloaded the full Odin QC1 file.
    flashed with Odin 3.11
    No error messages, flashed all 4 files.
    Got immediately dumped to recovery after an error screen saying the phone couldn't access knox.
    Reboot, and the phone shows stuck on 5.1.1, with a baseband of QC1. It appears to be still the 5.1.1 software/ui.
    tried a factory reset from recovery, no joy.

    Currently downloading QD1 Odin file, I will report back.


    edit: after a second full flash of all 4 files, it worked. wierd. Now running QC1. will updated to QD1 via odin shortly.

    disregard this post in it's entirety. :silly:
    1
    I have the SM-G900A from AT&T currently running stock 6.0.1 (G900AUCS4DQD1). I have wanted to root this phone but have read over and over that it can't be done unless I downgrade first. Is the file in this thread basically the exact same thing (unrooted) that I currently have on my phone? Or is it a rooted version of the same thing?