If it shows "Pass" you successfully flashed your firmware, You meant the green progress bar with a timer?
Edit: Post a screenshot or log.
[TUT]Official Gingerbread 2.3.6 05.05.2012 GalaxyMini s5570~ODIN~UPDATED
- Thread starter dany547
- Start date
If it shows "Pass" you successfully flashed your firmware, You meant the green progress bar with a timer?
Edit: Post a screenshot or log.
http://xdaforums.com/showpost.php?p=12979477&postcount=21
Have you removed your sim and SD card ?
You should have flashed with one package using S5570XXKPK.
Have you removed your sim and SD card ?
You should have flashed with one package using S5570XXKPK.
Try reflashinh it and check the settings in Odin if u done any mistake in placing the files.
or try unrooting ur phone and try again it will work
Sent from my GT-S5570 using xda premium
try using another usb port, and using Samsung USB Cable
it only take 3-5mins to flash.
and dont forget to close/exit KIES while using ODIN.
Last edited:
Make Sure you are using Odin Multidownloader v4.38 GTS5570....
---------- Post added at 06:46 AM ---------- Previous post was at 06:44 AM ----------
You can't connect while the phone is off...
Hehe man now I have a little doubt are u installing ur rom in download mode it not? ??
Press volume down home and power key together open Odin
insert your phone to PC in the state of download mode don't open kyes you will see in Odin a message will pop out as "added"
You
Are don't install the rom now without opening kies .you will see your phone will auto restart from download mode to your rom
Click thanks if I helped you
you should do it as said in the tutorial, i just want to remind you to close/exit KIES before using ODIN. we install KIES only for the driver.
Try flashing with XXKPK one package firmware and make sure that SD Card and SIM card is removed and Kies in not running.
Yeah you can flash it but you may have some battery issues
After flashing
So it I'd recommended to charge ur battery to 90% or more
Sent from my GT-S5570 using xda premium
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
63Hi guys i'd searched this forum but i didnt found a direct link on who to update the Galaxy mini to Android 2.3.6 aka gingerbread.So i did a lil google searching and i have found 2 methods.Correct me if this is already posted here,i'm just trying to help.And sorry for my eng. SAY THANKS IF YOU LIKE MY SUPPORT
ATTENTION!!! I'M NOT RESPONSABLE FOR ANY DAMAGE THAT YOU MAY CAUSE TO YOUR PHONE,DO IT ON YOUR OWN RISC!!THOSE FIRMWARE ARE FROM THE EUROPEAN OFFICIAL UPDATES,THEY WONT WORK FOR ASIA/AUSTRALIA!(i didnt test it)
You dont have to root your phone for any of those two methods.
THE LATEST ROM IS THE ONE FROM THE FIRST METHOD OF FLASHING!
You will need: -A WINDOWS XP,VISTA,SEVEN machine
-NET COMPACT FRAMEWORK 2.0
-USB CABLE AND THE S5570 ,doh!
First Method(4 files mode) ANDROID 2.3.6 updated 05.05.2012
1) Download this version of Odin from HERE
2) Download and install KIES from HERE (if u allready got Kies pass this step),we need KIES for the latest USB drivers
3) Download the firmware from HERE extract it
4) Download OPS file from HERE
5) Make shure that your phone is 70% charged
6) Turn off your phone
7) Now enter ODIN,you will something like this
8) Load the OPS file that you have just downloaded by clicking OPS on Odin and select TASS_v1.0.ops
9) Now from the firmware that you have extract it(THIS IS THE MOST IMPORTANT PART)
-APBOOT_S5570XWKTN_CL1019135_REV02_user_low_true.tar.md5 goes into BOOT
-MODEM_S5570XWKT6_CL1000416_REV02.tar.md5 goes to PHONE
-CODE_S5570XWKTN_CL1019135_REV02_user_low_true.tar.md5 goes to PDA
-and GT-S5570-MULTI-CSC-OXXKTB_RST.tar.md5 to CSC
MAKE SURE THAT YOU GET IT RIGHT!!!
10) Enter Downloading Mode,press VOLUM DOWN ,OK BUTTON, POWER BUTTON AT THE SAME TIME!
11) Connect the USB cable,now in Odin at COM PORT MAPPING is should appeare the USB cable as connected(COM1,COM2 etc)
12) Now make shure the in ODIN the only boxes that are checked are AUTO REBOOT , RESET TIME and PROTECT OPS after you have checked press START,now u have to wait 5-6min.
13) It must say above the COM connection PASS on a blue backgroud to disconnect the USB cable and u are done.!!EVEN IF THE PHONE BOOTS UP DON'T DISCONNECT THE USB CABLE,WAIT FOR THE PASS SCREEN!!
METHOD 2(1 file MODE) ANDROID 2.3.6 Updated 09.02.2012
1) I guess now u got ODIN and KIES(look in the post above),and your phone haves 70% battery
2) Turn off your phone
2) Now we gonna download the 2.3.6 firmware from HERE and extract it.
3) Then we download the OPS from BENI OPS (ATTENTION! IF IS NOT WORKING WITH BENI OPS USE TASS OPS) we gonna load the file and we have to check the option ONE PACKAGE then we click the ONE PACKAGE button below and select the file from the folder that we just downloaded/extracted SS5570XWKTZ_S5570XWKT9_S5570OXFKT5_RST_HOME.tar.md5,the only options that should be checked are ONE PACKAGE,RESET TIME,AUTO REBOOT,PROTECT OPS
4) DO A FACTORY RESET,DONT FORGET!!! AND REMOVE DE SD CARD (you must do this to avoid errors,but isnt a Must )
5) Enter Downloading mode,explained above is the 1st method,connect the USB cable,and wait for ODIN to connect to your phone COM port(see above),press START button.
6) Wait 5min..wait for the PASS screen (like above),disconnect the USB and you are all done.
THANKS TO: http://droidangel.blogspot.com and http://www.sammobile.com2I have galaxy mini s5570i and it is not starting n it stucks on samsung galxy mini start screen n i want to flash stock firmware and i downloaded all the files but mine phone is not recogonized by odin multi downloader i.have installed all the drivers n i have installed kies also ...
I.downloaded odin 3.07 and it recogonized mine phone but odin multi downloader 4.38 does not recogonize mine phone...
I want to install custom rom so i want to flash stock rom n install custom recovery as i cant get into stock recovery also..
I am using windows 8 to do all.these steps
Please help me....pleasee
Thanx in advance
If I Helped U Dont Forget To Press Thanks
Sent from my Sony Ericsson Xperia Mini Pro(SK17i) using Tapatalk 422
you should do it as said in the tutorial, i just want to remind you to close/exit KIES before using ODIN. we install KIES only for the driver.
