I think the Cubot X6 has two big problems:
1. You have only 1 GB RAM
2. You can only use 1,4 GB internal memory for the apps
The first problem is easy to solve. You can use the Roehsoft RAM Expander to create a swap file. Therefore you can increase the RAM up to 4 GB. It works very well! :good:
The second problem is more difficult. I tried to install Link2SD, but I always get the error message: "Link2SD invalid package". Maybe the Cubot X6 (official Rom 1.0) is not compatible with the current Link2SD version??? I don't know.
Then I look in the following
vold.fstab file
PHP:
## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
dev_mount sdcard /storage/sdcard0 emmc@fat /devices/platform/goldfish_mmc.0 /devices/platform/mtk-msdc.0/mmc_host
dev_mount sdcard2 /storage/sdcard1 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-msdc.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard /mnt/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2
## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
dev_mount usbotg /mnt/usbotg auto /devices/platform/mt_usb
and tried to modify it.But I failed again.
Maybe someone has a better solution to solve the second problem.
(Excuse my bad english)