FORUMS
Remove All Ads from XDA
Post Reply Email Thread
DISCLAIMER:

I'm NOT responsible for any damage you cause to your phone.
Be sure to follow the steps correctly.


REQUIREMENTS:
  • Windows

  • Samsung KIES and all drivers installed.

  • ODIN for flashing the firmware.


HOW TO ROOT:
  1. Download the Pre-Rooted firmware that matches the firmware your using.


  2. Extract the RAR file, you will end up with a folder with two files in it.
    SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


  3. Close any KIES application that might be open.


  4. Open ODIN.


  5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


  6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


  7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
    Do NOT select "Repartition"


  8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


  9. Plug your phone usb cable to your computer.
    If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


  10. Click the "START" button and wait for it to finish.
    Do NOT unplug the usb cable before ODIN finishes its job.


    If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
    Then you can remove the usb cable.
    Your device will reboot in Recovery Mode and will finish the installation.
    When it finishes, it will reboot and start the Android System.



  11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").




That's it!
Now, enjoy your rooted Galaxy S Advance!
You can go back to Download Mode to check that your Binary Counter hasn't increased.



DONATIONS:
Consider making a donation,
It helps support developers so they can keep doing a great job!
Donate via Paypal
The Following 88 Users Say Thank You to diego-ch For This Useful Post: [ View ] Gift diego-ch Ad-Free
11th November 2012, 12:22 PM |#2  
OP Senior Member
Flag João Pessoa
Thanks Meter: 3,070
 
Donate to Me
More
GT-I9070 Rooted Firmwares:


REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
DOWNLOAD

REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
DOWNLOAD

REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
DOWNLOAD

REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
DOWNLOAD

REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
DOWNLOAD

REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
DOWNLOAD

REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
DOWNLOAD

REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
DOWNLOAD

REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
DOWNLOAD

REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD

REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD

REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
DOWNLOAD

REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
DOWNLOAD

REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
DOWNLOAD

REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
DOWNLOAD

REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
DOWNLOAD

REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
DOWNLOAD

REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
DOWNLOAD

REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
DOWNLOAD

REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
DOWNLOAD

REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
DOWNLOAD

REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
DOWNLOAD

REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
DOWNLOAD

REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
DOWNLOAD

REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
DOWNLOAD

REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
DOWNLOAD

REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
DOWNLOAD










Requests Suspended till JB ROM is released!

root your phone before making the ota update and the root will remain.

do not use kies to update the phone.
The Following 38 Users Say Thank You to diego-ch For This Useful Post: [ View ] Gift diego-ch Ad-Free
11th November 2012, 12:23 PM |#3  
OP Senior Member
Flag João Pessoa
Thanks Meter: 3,070
 
Donate to Me
More
GT-I9070P (NFC Version) Rooted Firmwares:



REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
DOWNLOAD

REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
DOWNLOAD

REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
DOWNLOAD

REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
DOWNLOAD

REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
DOWNLOAD

REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
DOWNLOAD

REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
DOWNLOAD

REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
DOWNLOAD


The Following 17 Users Say Thank You to diego-ch For This Useful Post: [ View ] Gift diego-ch Ad-Free
11th November 2012, 12:50 PM |#4  
Junior Member
Thanks Meter: 0
 
More
Thumbs up
Good Job
14th December 2012, 04:38 PM |#5  
Junior Member
Thanks Meter: 0
 
More
hello,
is it possible to root this one please?


PDA: I9070PXXLK4
PHONE:I9070PXXLK4
CSC: I9070PXEZLH1
Region: XEZ - Czech republic

firmware here: hotfile.com/dl/181526739/d5184ab/I9070PXXLK4_I9070PXEZLH1_XEZ.zip.html

Thankou You

and just one more question ,
how to unroot the device if i need it?
14th December 2012, 04:54 PM |#6  
shut_down's Avatar
Senior Member
Flag Belgrade
Thanks Meter: 3,582
 
Donate to Me
More
Quote:
Originally Posted by sgsa

hello,
is it possible to root this one please?


PDA: I9070PXXLK4
PHONE:I9070PXXLK4
CSC: I9070PXEZLH1
Region: XEZ - Czech republic

firmware here: hotfile.com/dl/181526739/d5184ab/I9070PXXLK4_I9070PXEZLH1_XEZ.zip.html

Thankou You

and just one more question ,
how to unroot the device if i need it?

You just flash that firmware that you post to be rooted.
27th November 2012, 09:19 PM |#7  
Senior Member
Thanks Meter: 920
 
More
Quote:
Originally Posted by diego-ch

GT-I9070P (NFC Version) Rooted Firmwares:


REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
DOWNLOAD

Hey Diego!

regarding above mentioned FW:

Is it correct that SU is (only) in /system/xbin/ and not in /system/bin/ ?
27th November 2012, 09:59 PM |#8  
OP Senior Member
Flag João Pessoa
Thanks Meter: 3,070
 
Donate to Me
More
Quote:
Originally Posted by fluffi444

Hey Diego!

regarding above mentioned FW:

Is it correct that SU is (only) in /system/xbin/ and not in /system/bin/ ?

yes. su binary is on /system/xbin
28th November 2012, 12:20 AM |#9  
Junior Member
Thanks Meter: 1
 
More
REGION: XSE | PDA: I9070DXLK1 | CSC: I9070OLBLK1


please help me....here is hotfile.com/dl/180114223/1c1b576/I9070DXLK1_I9070OLBLK1_XSE.zip.html

i want ask something...i am on REGION: XSE | PDA: I9070DXLK1 | CSC: I9070OLBLK1 right now..if i flash mw fw to REGION: XSE | PDA: I9070DXLD1 | CSC: I9070OLBLD1, will i increase the binary counter?
28th November 2012, 03:25 AM |#10  
Senior Member
Thanks Meter: 13
 
More
Quote:
Originally Posted by diego-ch

yes. su binary is on /system/xbin

Does this mean the directions on http://forum.xda-developers.com/show....php?t=1881964 need modified to work with GT-I9070P?

"sudo cp su /mnt/system/xbin/su" instead of "sudo cp su /mnt/system/bin/su"
Post Reply Subscribe to Thread

Tags
diego-ch, galaxy s advance, i9070, root

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes