IMPORTANT NOTICE:
i will personally no longer be able to provide support on this rom although there are a few people on xda who will... so my support is officially dicontinued here on this thread... although i have developed a new tool and rom for the A13's and you can get it HERE i will be providing support for HERE..
EDIT: I have developed a new tool for the allwinner a13 to carry out most tasks involving editing scripts, touchscreen parameters and fixes etc.. you can find it HERE
FaaastJB v2.5
A13 Allwinner with Jelly Bean 4.2.2 by Toxicro
MAKE BACKUP - using ZeusToolKit
Caution: don't flash this on KB901 with TS ft5x_ts
Rebased the whole ROM on various builds of JB 4.2.2 to run smooth without tweaks:
- cleaned up
- rooted
- adb enabled by default
- replaced the default launcher with GO Launcher HD
- adapted to accept my custom modules TS
lsmod on default ROM:
device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
sp0838 19927 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000
Partitions on default ROM:
root@android:/ # busybox df -h
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 176.8M 68.0K 176.7M 0% /dev
tmpfs 176.8M 0 176.8M 0% /mnt/asec
tmpfs 176.8M 0 176.8M 0% /mnt/obb
/dev/block/nandd 503.9M 398.1M 105.9M 79% /system
/dev/block/nande 1.2G 103.7M 1.1G 9% /data
/dev/block/nandh 315.0M 5.2M 309.8M 2% /cache
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/sdcard
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/secure/asec
root@android:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
93 0 16384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 614400 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 327680 nandh
93 64 262144 nandi
93 72 1171456 nandj
DOWNLOAD ROM:
- New Version v2.5 -
4shared.com - FaaastJB-v2.5
mediafire.com - FaaastJB-v2.5
- Old version v2-
4shared.com - FaaastJB-v2
mediafire.com - FaaastJB-v2
By default Touch Screen DON'T work
STEP BY STEP FOR INSTALLING TS MODULES:
You need to have ADB installed before proceed
1. Flash FaaastJB with Livesuit 1.11
2. Wait for tablet to boot and load
3. Connect your tablet to PC
4. Extract all content from TS MODULE archive to a directory
5. Execute run.bat
6. After press any key dialog the tablet will reboot
7. That's all folks
If you don't know what TS driver to use try Uberizer option k/22 and use command "lsmod" on original working ROM.
I recommend try all archives and test both TS and gsensor for better result, don't stop at the first working TS try more.
OLD TS from FaaastJB 4.1.1 don't work here
DOWNLOAD TS MODULE
Single TS MODULE
- ekt3632.ko aka elan
- gt811_ts.ko
- gt828_ts.ko+mc32x0.ko
- gt811_ts.ko+dmard06.ko
- gsl1680.ko
- ft5x_ts.ko
- goodix_touch.ko
- gslx680.ko+mxc622x.ko
- ssd253x-ts.ko+dmard06.ko
- gslx680.ko
- gsl1680.ko+dmard06.ko
- ft5x_ts.ko
- gt828_ts.ko+mxc622x.ko
- zet6221.ko
- ekt3632.ko aka elan
- ektf2k.ko aka ekt3632+mma7660
- ssd253x-ts.ko+dmard06.ko+mma7660.ko
- elan_ts+mxc622x
- goodix811.ko+mxc622x.ko
- ssd253x-ts.ko
USERS TS MODULE
- gls1680+dmard06+mc32x0 - Thx to meatsos
- mg8698s+mxc622x+sp0838 - Thx to leoZ
- gt828_ts+mma7660 - Thx to goosen999
Multiple TS MODULE
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_cxx, gslx680, st1536_ts, elan_ts+mxc622x
- ft5x_ts, goodix_ts, gslX680, nt11003+mxc32x0
- ft5x_ts, ssd253x-ts, gt811_ts, sitronix_i2c_touch+dmard06+mma7660
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_touch_811, gsl1680, st1536_ts+mxc622x
- aw5306_ts.ko-pixcir_ts.ko-gt811.ko-gsl168x.ko-sichuang.ko-ft5x_ts.ko+mma7660
- gt811_ts.ko-A13_gslX680.ko-ft5x_ts.ko+mxc622x
- S710TAB - ft5x_ts.ko-gt811.ko-gslX680.ko+mxc622x
SPECIAL TS MODULE
- Ainol Novo7 Legend
- Multiple TS/GS: gslX680-ft5x_ts-gt818_ts-gt811_ts-zet6221+bma250-mma7660-dmard06-mma8452-kxtik-mxc622x-afa750-mma865x-lis3dh-mc32x0 after you use this module you will need to reflash ROM again if not works.
If you have found a TS and have reverse axes or screenshift i recommend to use this tools or try TSCalibration
More application for calibration need more people to test and confirm is working Touch Recalibrate
If you have inverted gsensor you will need to edit this file /system/usr/gsensor.cfg look for your gsensor name and play with this:
gsensor_direct_x = false
gsensor_direct_y = true
gsensor_direct_z = false
gsensor_xy_revert = false
Camera sux anyway on this tablet so if you still want to work you will need to edit script.bin section [csi0_para]
Don't forgot to make BACKUP of default ROM
For backup i recommend Uberizer option i/3.
I recommend this ROM for people who don't have a working TS.
This devices can't be bricked but if you don't find the right ROM they don't work correctly so if you don't know what your doing don't try it.
I recommend this ROM for people who don't have a working TS.
Thanks goes to Toxicro @ Techknow Forums for this rom this is his work..
Last edited: