Yes im not sure if its totally necessary with the TouchPro2 or not. I would assume it will do more good than harm but when dave reads this if he can verify whether its a good idea on this phone then I will add it.I noticed it doesn't mention anything about hard resting after flashing perferred ROM, like the tutorial did for the Touch pro 1, any reason for this?
If you read the note at the beginning of my Rom flashing section then it says to check your chosen Roms Thread for any specific installation instructions. Most chefs include all the setup and programs in the Rom. I dont know many that still use UC but if they do then you should follow their flashing instructions. If no specific instructions are given or the Rom download doesnt include a UC folder for the storage card then you can safely remove the MicroSD Card and flash using my guide.
Hope that clears up your question.
Advanced Configuration Tool v3.3 allows you to tweak alot of settings. When you first run it make a backup file first just in case you change anything that you didnt want to lol.It does, thanks! I hadn't realised that the UC stuff was obsolete - so is there any other current method for automating configuration changes? Not so much installing programs since as you say the common ones are normally included in the ROM, but just all the tweaking of settings and so on, since most ROMs will come tweaked to their chef's preferences.
Thanks for your help, and for taking the time to write this guide in the first place!
Steve.
The 3G is all in the hardware so the ROM will not effect it, for the keyboard there is a cab to get it back to T-Mobiles layout look in the themes and software section!I want to do this too, I have already dl'ed ROM (CHT Hong Kong), and want to flash it on T-Mobile US version, the main concern is 3G, followed by keyboard
don't mind secondary cam
If you brick your phone, does a hard reset unbrick it?
And sorry about this noob question, but do you have to flash first to install custom roms? or does flashing do somethign entirely different...
3. NEW: Internet access is required as the program checks on-line for updates and license
Nice, behind a proxy here, and cannot set a proxy address anywhere.
Nope, just flash the next! Some people say its a good idea to flash back to the OEM ROM every now and then to help system stability but there is no real proof as to weather or not this needs to be done! Its up to you!do you need to flash an origional rom back on between flashing to custom cooked roms?
1: Flashing Hard Spl will not reset your device or erase any Data, flashing a new ROM will however!I have some quick questions regarding flashing new ROMs here:
When I flash the HSPL, I assume that I will start out fresh correct? As in I lose all data currently not backed up on my device?
When I flash a new 6.5 ROM, do I need to re-download .NetCF 3.5 again or is that synchronized with 6.5?
Are custom themes compatible with 6.5? e.g. can I use the TF3D 2.5 Icons with the 2.1 like I'm using now on the stock T-MO rom on my Rhodium?
Sorry guys, I'm a fairly avid flasher when it comes to Android, but never used a WM device in my life before.
I just tried to do a TASK29, like here
http://xdaforums.com/showthread.php?t=649191
but, it asked my if i want to upgrade to the rom 2.0.0 (?? something)..and now the phone remains in the splash screen.
how can i connect it to upgrade to a ENERGY ROM?
i have done a couple of ROMs updates, and all of them worked fine...now...how to pass the spash screen and connect it to the PC?
thank you...
tried the HARD RESET..and it still remains in the HTC white screen...for a couple of minutes...
***Each user gets 1 license, or perhaps 2-3 on request if needed (valid forever and works as transparently as possible, so it won't be a problem at all)
1) Do we need this in order to install HardSPL?
2) what is meant by it runs transparently?
I usually buy them unlocked already and decided to give it a go myself this time, so i am reading as much as possible before the big "brick" (^_^)
Thanks (^_^)
Hi all,
I have a RHOD100 UK Touch Pro 2 that is just back from HTC due to an RS232 USB port failure.
I am trying to flash up the latest Energy ROM but when I tried to install it it sits at "Loading..." and does nothing. Do I need to re-HardSPL the handset? I have tried this and the Auto Flash doesn't work and gives an error message. I tried the manual flash and the phone sits at 0% and times out and then I got an Error 262 message?
Has HTC done something so I can't flash a Custom ROM on to the handset!!?
Thanks.
it says spl-0.05.axebox
FULL TEXT :
Rohod100 32m ss-dc
spl-0.05.axebox
microp(led) 0x0A
microp(key) 0x04
turbo hw/turbo sw
TP MFG DATA
449,522. 798,849
790,202, 201,204
189854 cALIBRATED
so do i still need to flash again?