Dear All,
Verizon Samsung Galaxy S4 bricked. So with RIFF box I fixed the boot-loader. Now I can boot into download mode.
I have downloaded two Roms and both gives error when flashing with Odin.
First Rom : I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 and when flash error
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And Second Rom VRUAMDK_NoWipe.tar.md5 and when flash error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
When I go to download mode I see following:
Factory Mode
Product Name: SCH-i545
Curreny Binary: Samsung Official
System Status: Custom
Knox Karnel Lock: 0x0
Knox Warranty void: 0x0
Write Protection: Enable
eMMC Burst Mode Enable
Start)224,1440)
SW REV, CHECK FAIL : fused: 5, Binary :1 (I think the last two line appear after flash fail.)
Can anyone tell me which rom to flash and provide link to download. I bought it recently while its was dead so I have no previous info about set firmware or other details.
Thank you in advance.
Verizon Samsung Galaxy S4 bricked. So with RIFF box I fixed the boot-loader. Now I can boot into download mode.
I have downloaded two Roms and both gives error when flashing with Odin.
First Rom : I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 and when flash error
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And Second Rom VRUAMDK_NoWipe.tar.md5 and when flash error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
When I go to download mode I see following:
Factory Mode
Product Name: SCH-i545
Curreny Binary: Samsung Official
System Status: Custom
Knox Karnel Lock: 0x0
Knox Warranty void: 0x0
Write Protection: Enable
eMMC Burst Mode Enable
Start)224,1440)
SW REV, CHECK FAIL : fused: 5, Binary :1 (I think the last two line appear after flash fail.)
Can anyone tell me which rom to flash and provide link to download. I bought it recently while its was dead so I have no previous info about set firmware or other details.
Thank you in advance.