Xposed for INTEL ATOM x86_64 LP 5.1 solved! Z8300/Z8500/Bay/ Cherry Trail

Miroku77 · Apr 5, 2017

edit:
Ok, now i am quite confident this xposed works on most Dual Boot Cherry Trail (edit:and Bay Trail!)Tablets running stock-ish Android 5.1 Lollipop (even RemixOS!) but its doubtfull to run on heavily customized roms as MIUI or else(?). This said, alecuba16 reported not working for Cube iwork 10 (needs confirmation). Also i found gabsporto post who basically made the same experience and conclusions as me -.-'
So far i installed several modules (check out screenshot) and it runs perfect!

Please dont try this if you dont know how to make a nandroid backup or dont know what ADB means.

HOWTO:
Prereq: ROOT, TWRP, stock-like Android 5.1 @cherrytrail z8300 x86_64bit

Installation:
0. Backup
1. Install official Xposed installer (current 3.1.1) Dont start it yet!
2. Flash amiduos-xposed zip via TWRP; Reboot
3. Start xposed and DL any modules you like

4. Don't use the update function (->v87) in xposed! Keep v81 for now.

Download:
Official Xposed Installer for Lollipop:
https://xdaforums.com/showthread.php?t=3034811

amiduos-xposed.zip
http://amiduos.com/support/knowledge-base/article/xposed-framework-support-in-amiduos

or from wheelman's post:
https://xdaforums.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254

Wheelman & me installed installer-apk first, on AMiduos Website instructions (AmericaMegatrend-intel-dual-OS?) its the otherway around - i think it doesnt matter. Still it might be IMPORTANT you dont start the app before flashing the zip..!

Working:
Teclast x98 Plus II
Teclast X98 Plus
Teclast x16 Plus
Teclast Tbook 11
Onda V919 Air +RemixOS
Onda V80
Ares Nextbook (Intel Atom Z3735G !!)

reported not working
Cube iWork 10 - need confirmation!

Please report working devices!

Original Thread from wheelman and gabsporto , dont forget to hit THX!
https://xdaforums.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254

https://xdaforums.com/xposed/lollipop-xposed-framework-intel-cherry-t3565149

Also worth reading #1 #6 by krustymars
https://xdaforums.com/android/software-hacking/twrp-twrp-2-8-7-0-root-teclast-x16-plus-t3561486

I hope its okay i re-post this in the general xposed area since this might interest some people and Rovo89 stated on Github : "So in short, I don't think I'll ever support this." - but he might wanna give this another shot

https://xdaforums.com/x98-air/general/xposed-teclast-x98-plus-ii-t3571839#post71743254

QUOTE from wheelman1995

Xposed installation:
1. Install XposedInstaller_3.1.1.apk
2. flash amiduos-xposed.zip using TWRP. No wipes needed.
You must not update xposed framework in the app. You will get bootloop.
Tested on Teclast x98 plus II C2D4, firmware V1.05_20160617.
Attached Files
File Type: zip amiduos-xposed.zip - [Click for QR Code] (4.02 MB, 22 views)
File Type: apk XposedInstaller_3.1.1.apk - [Click for QR Code] (2.84 MB, 24 views)

SELF_QUOTE:

Nice, I can confirm xposed works on my TECLAST TBOOK 11 v1.07! Thanks dude!

I googled (or better raped google and 4pda i think) to find this clue about AMIDUOS some time ago but had not the guts to try before at least someone tested on an intel z8300 device i wonder why there arent more requests since most chinese dual boot tablets have this cpu.

So probably it works on ~ALL CHINESE INTEL ATOM X5 Z8300 x86_64 devices!!!!
(make a backup and test yourself! I only have tbook...)

Tags: XPOSED FOR INTEL ATOM X5 Z8300 x86_64 WORKING SOLVED ONDA CUBE CHUWI TECLAST ETC:^-^
edit: I installed busybox first - not sure if needed but i might had read something about this?

Miroku77 · Apr 12, 2017

Screens

Miroku77 · Apr 12, 2017

alecuba16

Doesn't work for cube Iwork 10 with android 5.1 x86_64, it shows not compatible with x64...

"not combatible with x64" got me thinking...if you could see SS,mine shows as ARM!

In aida64 it show the SoC/CPU is capable of different instruction sets: x86_64, Armeabi 7 and ARM. I had a look on the code of" flash-script.sh" and this looks interesting but im no dev! Just a wild guess...

ARCH=arm
IS64BIT=
if [ "$ABI" = "x86" ]; then ARCH=x86; fi;
if [ "$ABI2" = "x86" ]; then ARCH=x86; fi;
if [ "$API" -ge "21" ]; then
if [ "$ABILONG" = "arm64-v8a" ]; then ARCH=arm64; IS64BIT=1; fi;
if [ "$ABILONG" = "x86_64" ]; then ARCH=x64; IS64BIT=1; fi;
fi

much better research by krustymars. Shouldn't it be easy now to port to official?
https://xdaforums.com/showpost.php?p=71636611&postcount=6

YiPing_Huang · Apr 13, 2017

It seems to work on my X98 Plus A6C7 running Remix OS.

953091 · Apr 29, 2017

Thanks for your great work !
It works fine on my ONDA V919 Air CH !

humnar · May 13, 2017

Works on a nextbook ares 8

Miroku77 · May 13, 2017

Thanks for the feedback!:good:

martyfender · May 14, 2017

Miroku77 said:
Thanks for the feedback!:good:

I also have an older Nextbook Ares 8, that originally came with Android 5.0. It has been upgraded to 5.1.1 with a rom ported from the newer model of the tablet. This version of xposed is working fine on it also. there are no problems with the modules I have tried so far: gravity box, greenify, amplify and xposed media scanner optimizer.
Question: If I decide to remove it, will the standard, flashable, xposed uninstaller, work to remove it? It appears to me that it should, based on what I saw when I read the .sh script built in. Has anyone tried it to confirm that it works?
Thanks

YetAnotherForumUser · May 15, 2017

Works on Teclast X80 Pro (E3E9)

Thus far this seems to work as intended on a Teclast X80 Pro (E3E9).

martyfender · May 15, 2017

martyfender said:
I also have an older Nextbook Ares 8, that originally came with Android 5.0. It has been upgraded to 5.1.1 with a rom ported from the newer model of the tablet. This version of xposed is working fine on it also. there are no problems with the modules I have tried so far: gravity box, greenify, amplify and xposed media scanner optimizer.
Question: If I decide to remove it, will the standard, flashable, xposed uninstaller, work to remove it? It appears to me that it should, based on what I saw when I read the .sh script built in. Has anyone tried it to confirm that it works?
Thanks

Update: I can confirm that flashing the xposed uninstaller in twrp removes xposed.
I had it installed with the following modules:
gravity box
amplify
appopsxposed
power nap
greenify xposed
xposed mediascanner

I found that idle cpu useage was 9-10% with these modules and only 1-2% without xposed and the previous modules. I suspect if I had just used gravity box and the already installed greenify it might have been ok. I suspect the following modules added quite a bit of overhead, contrary to their supposed benfits:
amplify
appopsxposed
power nap
Anybody care to weigh in on their experiences with xposed and various modules?
Thanks

AsDeep · May 15, 2017

Xiaomi MiPad 2 - Wrong platform

Ugyi007 · Jun 7, 2017

Works on ONDA V891w CH

Jorge.Name · Jun 14, 2017

Chuwi Hi12 Dualboot

Hi, I can confirm it's working great on my Chuwi Hi12 Dualboot (Intel Atom z8350) :good::laugh:

dvijetrecine · Jun 20, 2017

not working on acer predator 8, says wrong platform

ac0935p · Jul 5, 2017

Chuwi hi12

Works perfectly on hi12 - installer hangs sometimes. Gravitybox, Android Nify and Lockscreen widgets all work. Appopsxposed just hangs.

shaun_prawn · Sep 4, 2017

CUBE iWork10 DOES WORK!!! THANKS!

I can confirm that this does work for the Cube iWork10 Ultimate. I do have a newer i15-TG model with z8350 processor, but I don't see why it shouldn't work with any of the other models. The reason I think one person said it doesn't work is when flashing the amiduos-xposed.zip in TWRP, I did get an error, but it was to do with not having access to system mount or something (I can't remember the exact words). To solve this, go to the 'mount' option in TWRP, and check the 'system' checkbox. Then I was able to flash the zip fine. On reboot it did take quite a while to load and the 'optimizing apps' (no more than 5 minutes), but it works. Thanks heaps for this.

brainvision · Sep 13, 2017

I can also confirm it's working on cube iWork 10 Ultimate.

Inviato dal mio LG-V400 utilizzando Tapatalk

VDDZ · Sep 16, 2017

Thank you! Working on Chuwi Hi8 Pro

fdsasdfddsa · Oct 5, 2017

Works fine on my iwork10 i15-TD! Thanks a lot:good:

Anragsor · Oct 14, 2017

Thank you! Working on Chuwi Hi8 Pro 6040

Xposed for INTEL ATOM x86_64 LP 5.1 solved! Z8300/Z8500/Bay/ Cherry Trail

Member

Member

Attachments

Member

Member

Member

Member

Member

Senior Member

Senior Member

Senior Member

New member

Member

New member

Senior Member

Member

Member

Senior Member

Member

New member

New member

Similar threads

Top Liked Posts