[Rom] Mokee For Atrix 4g (Android L 5.0.2) (preview)

Search This thread
By:
Advanced…
B

Bass_Face

Senior Member
Oct 4, 2014
148
45
hyderabad
BACKUP /OSH (WEBTOP) BEFORE PROCEED!!!

BACK YOUR OWN CWM RECOVERY IMAGE FILE BEFORE PROCEED!!!

BACKUP ALL YOUR DATA!!! USE IT ON YOUR OWN RISK!!!
(yes i copied that from z :v )

NOTE: IM NOT THE DEVELOPER OF THIS ROM ALL THE CREDITS GO TO @fengyr :D.!!

if you've been using z's cm 11,the installation is pretty much the same.Format /system, /osh, /preinstall and install,use the same recovery (v4 suggested)

HEre's the link : http://pan.baidu.com/s/1o6JWTTK#path=%2Fmokeefor860_5.0
right click on the first file and hit the download button (translate the page to english if you're having problems)

NOTE:THIS IS JUST A PREVIEW OF WHATS TO COME. ALMOST NOTHING THAT IS REQUIRED FOR EVERYDAY USE WORKS IN THIS BUILD. ITS JUST FOR THE PEOPLE WHO CANT WAIT TO GET A TASTE OF LOLIPOP.
NOTE: I DID NOT THE BUILD THIS ROM.!
NOTE: Im not responsible if this rom causes a nuclear war in your country or destroys your phone,nor is the dev,nor is anyone here or out of xda.


Working:
wifi works
I dont know...nothing noticeable works now,the phone recognizes your sim but u cant make any calls as there is no sound


Not Working:
Sound
Camera
Fingerprint Scanner (i dont think we have to even mention this anymore :p)
Browser (Because compilation time is too long, so there is no compile, you need to extract from another ROM add(libwebviewchromium.so and webview ...))
battery stuck at 100%
you tell the dev

For anyone who hasnt tried out cm11 by z and not sure about the installation process,head over to : http://xdaforums.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281

Here's the original reply about the rom : http://xdaforums.com/showpost.php?p=58839560&postcount=1048

dev thread (in chinese (i guess)) : http://tieba.baidu.com/p/3568228532 (translate to english
 
Last edited:
  • Like
Reactions: 99913308, jsmold, asmaron and 8 others
joshua764

joshua764

Senior Member
Jun 11, 2012
637
101
mexico df
I download. it was expected. comments now you try. thx

use recovery v4 for installation.

73896b48e6337fe2b0957a75023bd3ba.jpg


bc8c964c96e75628ae7ed435b0612fc7.jpg
 
Last edited:
  • Like
Reactions: Bass_Face
G

guruzen

Senior Member
Sep 28, 2007
193
119
Phone Not Charging

Phone does not charge. It always shows 100%. If I remove the charger the phone goes dead. Need to figure out if something needs to be done with battd.
 
G

guruzen

Senior Member
Sep 28, 2007
193
119
I just went back to v4 because of no-charging problem. I somehow managed to flash v4 with charger connected.
I saw that "battd" does not start at all. Needs more work. Good for taste but cannot live long with the taste.

Excellent work though.
 
I

iTaisHi

Senior Member
May 16, 2014
142
21
Great work guys, I will test it on my spare atrix....
Thanks.

Sent from my Atrix 4G KK444, Z's CM11v4
 
joshua764

joshua764

Senior Member
Jun 11, 2012
637
101
mexico df
Bass_Face said:
BACKUP /OSH (WEBTOP) BEFORE PROCEED!!!

BACK YOUR OWN CWM RECOVERY IMAGE FILE BEFORE PROCEED!!!

BACKUP ALL YOUR DATA!!! USE IT ON YOUR OWN RISK!!!
(yes i copied that from z :v )

NOTE: IM NOT THE DEVELOPER OF THIS ROM ALL THE CREDITS GO TO @fengyr :D.!!

if you've been using z's cm 11,the installation is pretty much the same.Format /system, /osh, /preinstall and install,use the same recovery (v4 suggested)

HEre's the link : http://pan.baidu.com/s/1o6JWTTK#path=%2Fmokeefor860_5.0
right click on the first file and hit the download button (translate the page to english if you're having problems)

NOTE:THIS IS JUST A PREVIEW OF WHATS TO COME. ALMOST NOTHING THAT IS REQUIRED FOR EVERYDAY USE WORKS IN THIS BUILD. ITS JUST FOR THE PEOPLE WHO CANT WAIT TO GET A TASTE OF LOLIPOP.
NOTE: I DID NOT THE BUILD THIS ROM.!
NOTE: Im not responsible if this rom causes a nuclear war in your country or destroys your phone,nor is the dev,nor is anyone here or out of xda.


Working:
wifi works
I dont know...nothing noticeable works now,the phone recognizes your sim but u cant make any calls as there is no sound


Not Working:
Sound
Camera
Fingerprint Scanner (i dont think we have to even mention this anymore [emoji14])
Browser (Because compilation time is too long, so there is no compile, you need to extract from another ROM add(libwebviewchromium.so and webview ...))
battery stuck at 100%
you tell the dev

For anyone who hasnt tried out cm11 by z and not sure about the installation process,head over to : http://xdaforums.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281

Here's the original reply about the rom : http://xdaforums.com/showpost.php?p=58839560&postcount=1048

dev thread (in chinese (i guess)) : http://tieba.baidu.com/p/3568228532 (translate to english
Click to expand...
Click to collapse
Bass_Face said:
even usb to computer connection doesnt work:(
Click to expand...
Click to collapse

palmbeach05 said:
Not sure if it will show up for everyone, but here is the dev thread for this ROM http://tieba.baidu.com/p/3568228532
Click to expand...
Click to collapse
palmbeach05 said:
Translate to English if you want.
Click to expand...
Click to collapse
any news or upcoming version update?
 
I

iTaisHi

Senior Member
May 16, 2014
142
21
HDMI error

Please try be patience and let the guys work .
We should keep this thread as clean as possible , without unessential questions.
:)

in addition, as for the HDMI problem on KK444:
is it possible that this solution here , can solve the problem in our Atrix?
this thread:
http://www.tabletroms.com/forums/kit-kat-adam/7308-%5Bl-rom%5D-tenchis-slim-rom-lollipop-android-5-0-adam-%5Bwip%5D.html
from here you can download HDMI_Lollipop_FIX_Adam:
http://api.viglink.com/api/click?format=go&jsonp=vglnk_14255097110948&key=9169ff0b1f8aef584f6df1e00589c31d&libId=i6va7iqc01001k16000DA2siynyi5&loc=http%3A%2F%2Fwww.tabletroms.com%2Fforums%2Fkit-kat-adam%2F7308-%255Bl-rom%255D-tenchis-slim-rom-lollipop-android-5-0-adam-%255Bwip%255D.html&v=1&out=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F0B6jaSSPANy-hVHNaQl9HUmliR1U%2Fview%3Fusp%3Dsharing&ref=http%3A%2F%2Fwww.tabletroms.com%2Fforums%2Fkit-kat-adam%2F7308-%255Bl-rom%255D-tenchis-slim-rom-lollipop-android-5-0-adam-%255Bwip%255D-5.html&title=%5BL-ROM%5D%20Tenchi%27s%20Slim-ROM%20Lollipop%20Android%205.0%20for%20ADAM%20%5BWIP%5D&txt=%20download%20

Sent from my Atrix 4G KK444, Z's CM11v4 , P's 20150205 kernel.
 
Last edited:
  • Like
Reactions: joshua764
T

torecdude

Senior Member
Feb 20, 2014
403
60
My ESET nod32 anti virus is detecting the rom as multipile viruses threats. Why is that?
 
F

fengyr

Member
Mar 28, 2013
37
87
torecdude said:
My ESET nod32 anti virus is detecting the rom as multipile viruses threats. Why is that?
Click to expand...
Click to collapse
I'm sorry, I do not know.
There is no feedback viruses (Chinese Forum).
I use antivirus software, do not show the virus threat.
Can you tell me the specific files you.

Updated 2015-03-07:
Battery status display properly

Please forgive me for bad English
 
You must log in or register to reply here.

Similar threads

epinter
[ROM] CM10 (JellyBean) for Atrix
Replies
6K
Views
2M
D
DuyguSeli
mmontuori
[KERNEL] [3.1.10] Olympus (Atrix 4G) Kernel Project
Replies
2K
Views
1M
P
palmbeach05
epinter
[ROM] CM 10.1(Android 4.2) for Atrix
Replies
4K
Views
1M
W
williamfrench
t0dbld
  • Locked
* Official CM7 for Atrix Stable only (No Nightly )* Atrix CM Ba2tF RELEASED!!
Replies
4K
Views
1M
_Alex_
_Alex_
kennethpenn
[P-ROM] GingerBlur ★ v4.5 ★ 6/3
Replies
7K
Views
992K
D
d3athsd00r

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 11
    B
    Bass_Face
    BACKUP /OSH (WEBTOP) BEFORE PROCEED!!!

    BACK YOUR OWN CWM RECOVERY IMAGE FILE BEFORE PROCEED!!!

    BACKUP ALL YOUR DATA!!! USE IT ON YOUR OWN RISK!!!
    (yes i copied that from z :v )

    NOTE: IM NOT THE DEVELOPER OF THIS ROM ALL THE CREDITS GO TO @fengyr :D.!!

    if you've been using z's cm 11,the installation is pretty much the same.Format /system, /osh, /preinstall and install,use the same recovery (v4 suggested)

    HEre's the link : http://pan.baidu.com/s/1o6JWTTK#path=%2Fmokeefor860_5.0
    right click on the first file and hit the download button (translate the page to english if you're having problems)

    NOTE:THIS IS JUST A PREVIEW OF WHATS TO COME. ALMOST NOTHING THAT IS REQUIRED FOR EVERYDAY USE WORKS IN THIS BUILD. ITS JUST FOR THE PEOPLE WHO CANT WAIT TO GET A TASTE OF LOLIPOP.
    NOTE: I DID NOT THE BUILD THIS ROM.!
    NOTE: Im not responsible if this rom causes a nuclear war in your country or destroys your phone,nor is the dev,nor is anyone here or out of xda.


    Working:
    wifi works
    I dont know...nothing noticeable works now,the phone recognizes your sim but u cant make any calls as there is no sound


    Not Working:
    Sound
    Camera
    Fingerprint Scanner (i dont think we have to even mention this anymore :p)
    Browser (Because compilation time is too long, so there is no compile, you need to extract from another ROM add(libwebviewchromium.so and webview ...))
    battery stuck at 100%
    you tell the dev

    For anyone who hasnt tried out cm11 by z and not sure about the installation process,head over to : http://xdaforums.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281

    Here's the original reply about the rom : http://xdaforums.com/showpost.php?p=58839560&postcount=1048

    dev thread (in chinese (i guess)) : http://tieba.baidu.com/p/3568228532 (translate to english
    View
    10
    F
    fengyr
    Update 2015-03-15

    OMG!
    fix Sound!
    I did not do particularly detailed tests.
    Play music!

    I use operators to limit my upload speed (<60k),
    I did not upload, I continue to try to repair the camera.
    View
    4
    Reiki21
    Reiki21
    thinhx2 said:
    not work
    Click to expand...
    Click to collapse

    This is my attempt to port cm 12.1. I'm not a programmer so I could not resolve most of the issues.
    What seems to be working: Sound, wifi, calls, battery charging
    What's not working: Camera/video, usb storage, sim card detection, wifi tethering
    Didn't test: Bluetooth, mobile data, playstore apps
    Although sometimes it says that the sim card is not inserted, calls are working.
    Camera opens and you can take pictures but if you close the app or switch to the front camera/video, it crashes and you get a "Can't connect to camera". After a few tries it opens again. Video recording is not working at all.
    Thanks to gucky01 for his commits on which I based this port.
    Here is my manifest https://github.com/Waffolz/android
    Compiled build (Not for daily use) https://mega.nz/#!VcJV1BpB!MFzM9Hhj7_dS5cJNKXxfMx8-XaMIpN8fYr7C_lOKlWA
    Don't expect fixes from me, I've tried to fix the issues but failed. :crying:
    View
    4
    F
    fengyr
    Update Description
    1、Update to mokee 5.1 Code
    2、fix Make a call(update mokee source code of action)
    3、fix flash ROM for too long time.
    4、replacing hwcomposer.tegra.so the GT-P7500.olympus hwcomposer.tegra.so file dlopen need libdvm.so(lollipop no libdvm.so).
    Not uploaded rom.Not worth the content of the test.
    I still have no way to solve the problem of camera and mobile networks and usb.
    Because of work reasons, can not be continuously updated.I look forward to the return of "Z".


    camera log:
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() ++
    E/NvOmxCamera( 236): createCameraObjects: graph creation failed! [0x80001005]
    E/NvOmxCamera( 236): NvOmxCamera::createObjects :::: FAIL ::::::::::::::::: [0x80001005]
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() --
    ----------------->.
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) ++
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) --
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) ++
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) --
    E/OMXMaster( 236): OMX plugin failed w/ error 0x80001001 after registering 0 components
    -------------->
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.mp4.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.h263.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.h264.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.mpeg2v.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.mp2.decoder'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.mp4.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.h263.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.h264.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.mpeg2v.decode'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.mp2.decoder'
    W/OMXNodeInstance( 236): [8:google.mpeg4.decoder] component does not support metadata mode; using fallback
    W/OMXNodeInstance( 236): [9:google.h263.decoder] component does not support metadata mode; using fallback
    W/OMXNodeInstance( 236): [a:google.h264.decoder] component does not support metadata mode; using fallback
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.vpx.decoder'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.mp4.encoder'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.h263.encoder'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.Nvidia.h264.encoder'
    E/OMX ( 236): FAILED to allocate omx component 'OMX.google.mp4.encoder'
    ----------------->
    I/CameraClient( 236): Opening camera 0
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) ++
    E/NvOmxCamera( 236): int android::HAL_getCameraInfo(int, camera_info*) --
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() ++
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() --
    E/NvOmxCamera( 236): HAL_camera_device_open: open camera 0
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() ++
    E/NvOmxCamera( 236): int android::HAL_getNumberOfCameras() --
    E/NvOmxCamera( 236): HAL_camera_device_open: opened camera 0 (0x41738320)
    E/NvOmxCamera( 236): enableMsgType => 0xc0d
    E/NvOmxCamera( 236): internalGetParameters ++
    --------- beginning of crash
    F/libc ( 236): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x4 in tid 965 (Binder_1)
    I/DEBUG ( 233): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
    I/DEBUG ( 233): Build fingerprint: 'MOTO/olyatt/olympus:2.3.4/4.5.91/110625:user/release-keys'
    I/DEBUG ( 233): Revision: '33776'
    I/DEBUG ( 233): ABI: 'arm'
    I/DEBUG ( 233): pid: 236, tid: 965, name: Binder_1 >>> /system/bin/mediaserver <<<
    I/DEBUG ( 233): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x4
    I/DEBUG ( 233): r0 4231c010 r1 00020101 r2 40da7b06 r3 00000000
    I/DEBUG ( 233): r4 44ec5d7c r5 4231c010 r6 4231e388 r7 44ec5d88
    I/DEBUG ( 233): r8 42374270 r9 42374270 sl 40271775 fp 44ec5dd0
    I/DEBUG ( 233): ip dededede sp 44ec5d70 lr 40d8dc8f pc 40d8dcae cpsr 00000030
    I/DEBUG ( 233):
    I/DEBUG ( 233): backtrace:
    I/DEBUG ( 233): #00 pc 00015cae /system/lib/hw/camera.vendor.tegra.so (android::NvOmxCamera::powerOnSensor(void*)+61)
    I/DEBUG ( 233): #01 pc 00015c8b /system/lib/hw/camera.vendor.tegra.so (android::NvOmxCamera::powerOnSensor(void*)+26)
    I/DEBUG ( 233):
    I/DEBUG ( 233): Tombstone written to: /data/tombstones/tombstone_00
    View
    4
    F
    fengyr
    Bass_Face said:
    It is.? Or are you saying that the dev said he'll work on it then during the holiday.?

    Sent from my MB860 using XDA Free mobile app
    Click to expand...
    Click to collapse

    The New Year holiday is coming to an end.Will attempt to repair.
    View

New posts